coolant MERCEDES-BENZ SLS AMG GT ROADSTER 2015 C197 User Guide
[x] Cancel search | Manufacturer: MERCEDES-BENZ, Model Year: 2015, Model line: SLS AMG GT ROADSTER, Model: MERCEDES-BENZ SLS AMG GT ROADSTER 2015 C197Pages: 290, PDF Size: 6.24 MB
Page 287 of 290

Refrigerant instructio
nlabel Example
:refrigerant instruction label
0043 Warning symbol
0044 Refrigerant filling capacity
0087 Applicabl eSAE standards
0085 PAG oi lpartn umber
0083 Type of refrigerant
Warning symbols 0043indicate:
R possible dangers
R having service work carrie doutataq uali-
fie ds pecialist workshop
Fillin gcapacities Missing value
sweren ot available at time of
going to print. Al
lm odels Capacity
Refrigerant
28.2 oz
(800 g) PA
Go il Brake fluid
G
WARNING
The brake fluidc onstantly absorbs moisture
from the air. This lowers the boiling point of
the brake fluid. If the boiling point of the brake fluidist oo low, vapor pockets may form in the
brake system when the brakes are applied
hard. This would impair braking efficiency.
There is arisk of an accident. You shoul
dhave the brake fluidr enewed at
the specified intervals.
When handling brake fluid, observe the
important safety notes on service products
(Y page 281).
The brake fluidc hange intervals can be found
in the Maintenance Booklet.
Only use brake fluida pproved by Mercedes-
Benz according to MB Approval 331.0.
Information abouta pproved brake fluidc an
be obtained at any qualified specialist work-
shop or on the Internet at
http://bevo.mercedes-benz.com.
i Have the brake fluidr
egularly replaced at
aq ualified specialist workshop and the
replacement confirmed in the Maintenance Booklet. Coolant
Important safety notes !
Only add coolant that has been premixed
with the desired antifreeze protection. You
could otherwise damage the engine.
Further information on coolants can be
found in the Mercedes-Benz Specifications for Service Products, MB BeVo 310.1, e.g.
on the Internet at
http://bevo.mercedes-benz.com .Orcon-
tact aqualified specialist workshop.
! Always use
asuitable coolant mixture,
even in countries where high temperatures
prevail.
Otherwise, the cooling system is not suffi-
ciently protected from corrosion and over-
heating.
i Have the coolant regularly replaced at a
qualified specialist workshop and the
replacement confirmed in the Maintenance Booklet.
Compl ywith the important safety precautions
for service products when handling coolant
(Y page 281). Servic
eproducts and filling capacities
285Technical data Z
Page 288 of 290

The coolant is
amixture of water and anti-
freeze/corrosion inhibitor. It performs the
following tasks:
R corrosion protection
R antifreeze protection
R raising the boiling point
If the coolant has antifreeze protection down to -35 ‡(-37 †), the boiling point of the cool-
ant during operatio nisa pproximately 266 ‡
(13 0† ).
Th ea ntifreeze/corrosion inhibito rconcentra-
tio nint he engine cooling syste mshould:
R be at leas t50% .Thisw illp rotect the engine
cooling syste magain st freezing down to
approximately -35‡(-37† ).
R no te xceed 55% (antifreeze protection
down to -49‡[-45† ]).O therwise, heat
will no tbed issipated as effectively.
If the vehicl ehaslost coolant, ad dequal
amounts of water and antifreeze/corrosion
inhibitor. Mercedes-Benz recommend san
antifreeze/corrosio ninhibito rconcentrate in
accordanc ewithMBS pecifications for
Service Products 310.1.
Th ec oolant is checked with every mainte-
nanc einterva lataq ualified specialis twork-
shop.
i When the vehicl
eisfirst delivered ,itisfil-
le dw ithac oolant mixtur ethate nsures
adequate antifreeze and corrosio nprotec-
tion. Windshield/headlamp cleaning sys-
tem
Important safety notes !
Onl
yusewashe rfluid thatiss uitabl efor
plastic lamp lenses, e.g .MBSummerFit or
MB WinterFit. Unsuitabl ewashe rfluid
could damage the plastic lense softhe
headlamps. !
Do not ad
ddistilled or de-ionize dwater to
the washe rfluid container. Otherwise, the
level senso rmaybe damaged.
! Onl
yMBS ummerFit and MB WinterFit
washe rfluid shoul dbem ixed together. The
spra ynozzles ma yotherwis ebecome
blocked.
At temperatures above freezing: X Fil lthe washe rfluid reservoi rwitham ixture
of water and windshiel dwashe rfluid, e.g.
MB SummerFit.
Add 1partMBS ummerFit to 100 parts water.
At temperatures belo wfreezing:
X Fil lthe washe rfluid reservoi rwitham ixture
of water and windshiel dwashe rfluid, e.g.
MB WinterFit.
Adapt the mixing ratio to the outside temper-
ature.
R Dow nto1 4‡( 00F810 †): mix 1partMBW in-
terFit to 2parts water.
R Down to 00F84‡(00F820 †): mix 1partMBW in-
terFit to 1partw ater.
R Down to 00F820.2‡(00F829 †): mix 2parts MB
WinterFi tto1partw ater.
i Add windshield washer fluid, e.g. MB
SummerFi torMBWinterFit, to the washer
fluid ally earround.
Filling capacities Model Capacity
Allm
odels 7.4 US qt (7.0
l) Vehicl
edata, Coupe Dimension
sand weights
The data stated her especifically refers to a
vehicl ewiths tandard equipment. Consult an
authorize dMercedes-Benz Center for the
data for al lvehicl evariants and trim levels. 286
Vehicl
edata, CoupeTechnica ldata