jack points MERCEDES-BENZ SLS AMG GT ROADSTER 2015 C197 Owner's Manual

X
Using lug wrench 0043,loosen the bolts on
the wheel you wish to change by abouto ne
full turn. Do not unscrew the wheel bolts
completely.
The mounting for the jack is centered
between the front and rear wheel housings
(arrow). !
The jack is designed exclusively for jack-
ing up the vehicle at the jacking points.
Otherwise, your vehicle could be damaged. X
Position jack 0087at jacking point 0044. Example
X Make sure that the base of the jack is posi-
tioned directly under jacking point 0044.
X Turn crank 0085clockwise until jack 0087sits
completely on jacking point 0044and the
base of the jack lies evenly on the ground.
X Turn crank 0085until the tire is raised amax-
imum of 1.2 inches (3 cm) off the ground.
Removing awheel X
Unscrew the uppermost wheel bolt com-
pletely.
X Screw alignment bolt 0083into the thread
instead of the wheel bolt.
X Unscrew the remaining wheel bolts fully.
! Do not place wheel bolts in sand or on a
dirty surface. The bolt and wheel hub
threads could otherwise be damagedw hen
you screw them in.
! AMG ceramic high performance com-
pound brake system: Changing
awheel
273Wheels and tires Z