stop start MERCEDES-BENZ V-CLASS 2021 User Guide

#
T
To par
o par k using activ
k using activ e par
e parking assist
king assist ance:
ance:press
th ea steering-wheel button.
The Parking Assist in operation Accelerate
and brake Observe surroundings message is
shown in the inst rument cluster displa y. #
Release the steering wheel. #
Reverseth eve hicle, being ready tobrake at all
times. Reverse slo wly, and do not drive faster
th an 10 km/h. Parking assistance is otherwise
cancelled and Active Parking Assist is stopped.
On vehicles with automatic transmission, when
th eve hicle approaches there ar border of the
parking space, Active Parking Assist can brake
it to a standstill. #
Stop at there ar border of the parking space.
St op when PARKTRONIC sounds the continu-
ous warning tone, if not before.
Manoeuvring may be requi red in tight parking
spaces. Obser vethe messages in the inst rument
cluster displa y.
On completion of the parking procedure, the
Active Parking Assist finished message appears
and an acoustic signal sounds. Active Parking
Assist no longer supports you with steering inter-
ve ntions and brake applications.
Exiting a par
Exiting a par king space wit
king space wit h A
h Activ
ctiv e P
e Par
arking Assist
king Assist
R
R eq
eq uir
uir ements:
ements:
R The vehicle has been par ked parallel tothe
direction of tr avel using Active Parking Assist.
R The border of the parking space must be high
enough at the front and there ar; a kerb, for
instance, is not su1cient.
R The border of the parking space must not be
to o wide. Your vehicle can be manoeuvred into
a position at a maximum angle of 45° tothe
starting position in the parking space.
R A manoeuvring distance of at least 1 m must
beavailable.
Please no tethat you are responsible forth eve hicle
and sur roundings during the entire parking proce-
dure. #
Start theve hicle. #
Switch on the turn signal on the side you
intend toexitth e parking space. &
W WARNING
ARNING Risk of accident due tovehicle
swinging out while parking or pulling out of
a parking space
While parking or exiting a parking space, the
ve hicle swings out and can drive onto areas of
th e oncoming lane.
This could cause youto collide with objects or
ot her road users. #
Pay attention toobjects and other road
users. #
Where necessar y,stop theve hicle or
cancel the parking procedure with Active
Pa rking Assist. #
V
Vehicles wit
ehicles wit h manual tr
h manual tr ansmission:
ansmission: engage 1st
ge ar or reve rsege ar. #
V
Vehicles wit
ehicles wit h aut
h aut omatic tr
omatic tr ansmission:
ansmission: shiTthe
transmission toposition hork.
The Start Parking Assist? Yes: OK No: ~
message is shown in the inst rument cluster
displa y. #
T
To cancel t
o cancel t he pr
he process:
ocess: pressthe~ steer-
ing-wheel button or drive o..
or #
T
To e
o e xit t
xit t he par
he par king space using activ
king space using activ e par
e parking
king
assist
assist ance:
ance: pressthea steering-wheel but-
to n.
The Parking Assist in operation Accelerate
and brake Observe surroundings messageis
shown in the inst rument cluster displa y. #
Release the steering wheel. #
Pull away and be ready tobrake at all times.
Re verse slo wly, and do not drive faster than
10 km/h. Parking assistance is otherwise can-
celled and Active Parking Assist is stopped.
On vehicles with automatic transmission, when
th eve hicle approaches there ar border of the
parking space, Active Parking Assist can brake
it to a standstill.
Manoeuv ring may be requi red in tight parking
spaces. Obser vethe messages in the inst rument
cluster displa y.
On completion of the parking procedure, the
Active Parking Assist finished message appears
and an acoustic signal sounds. Active Parking
Assist no longer supports you with steering inter-
ve ntions and brake applications.
The parking assistance function of Active Parking
Assist is stopped. You will then ha vetosteer and 172
172
Driving and pa
rking

th
e tra1c situation. This could also cause you
to lose control of theve hicle. #
Only operate this equipment when the
tra1c situation pe rmits. #
Ifyo u cannot be sure of this, stop the
ve hicle in accordance with the tra1c
conditions and operate the equipment
with theve hicle stationar y. Yo
u must obser vethe legal requ irements forthe
count ryin which you are cur rently driving when
ope rating the on-board computer. 1
Display
2 Right control panel
3 LeT control panel
When you switch the po wer supply on, the on-
board computer will be activated.
Ve hicles with manual transmission: if youre mo ve
th eke y,then quickly re-insert it and switch the
po we r supply on, the on-board computer and the
inst rument cluster will not be activated.
Yo u can control the displa ysand the settings on
th e on-board computer with the steering wheel
buttons on the leT 3and right 2control panels.
S
S t teer
eer ing-wheel butt
ing-wheel butt ons
ons LeT
LeT
contr
control panel on t ol panel on t he st
he steer
eering wheel
ing wheel
ò R
Call up the main menu
:
9 Pr Pr
ess
ess br
brie0y
ie0y
R Scroll thro ugh lists
R Select menu or function
R IntheRadio orMedia menu, open
th e track or station list and select a
station, audio track or video scene.
R IntheTelephone menu, switch to
th ete lephone book and select a
name or a telephone number. LeT
LeT
contr
contr ol panel on t
ol panel on t he st
he steer
eering wheel
ing wheel
:
9 Pr
Pr ess and hold ess and hold
R Quickly scroll thro ugh all lists
R IntheRadio orMedia menu, use
ra pid scroll toselect a station,
audio track or video scene.
R IntheTelephone menu withthe
te lephone book open, start rapid
scroll.
a R
In all menus, con/ rmthe selected
entry on the list or the display
R IntheRadio orMedia menu, open
th e list of available radio sources or
media.
R IntheTelephone menu, switch to
th ete lephone book and start dial-
ling the selected number.
ñ R
Switch o. LINGU ATRO NIC
% Pr
Pr ess
ess br
brie0y
ie0y
R Back
R Hide displ aymessages
R IntheRadio orMedia menu,exit
th e track or station list
R Exit thete lephone book or redial
memory
% Pr
Press and hold
ess and hold
R Call up the standard display in the
Trip menu Right contr
Right contr
ol panel on t
ol panel on t he st
he steer
eering wheel
ing wheel
6 R
Make or accept a call
R Switch tothere dial memory
~ R
Reject or end a call
R Exit thete lephone book or redial
memory
W
X R
Adjust thevo lume
ó R
Switch on LINGU ATRO NIC
8 R
Switch sound on/o. 182 182
Instrument clus
ter and on-board computer

Ov
Ov
er
ervie
vie w of dat
w of dat a sho
a sho wn on t
wn on t he ins
he instr
trument clus-
ument clus-
t
t er display
er display Display (e
xample)
1 Drive prog ram (/ page 144)
2 Additional speedome ter
3 Transmission position (/ page 141)
4 Time
5 Outside temp erature
6 Display section for display messages and
menus
7 Status area
To call up the list of menus in display section 6,
press theò steering-wheel button.
% You can switch additional speedome ter2 on
and o. on theInstrument cluster submenu of
th eSettings menu.
The following displa ysmay appear in status area
7 ofthe displa y:
Z GearshiT recommendation with manual
transmission (/ page 141) or automatic
transmission (/ page 144)
1 A door is not comple tely closed
= PARKTRONIC (/ page 165)
¯ Cruise control (/ page 157)
È Limiter (/ page 157)
z DSR (/ page 159)
_ Adaptive Highbeam Assist (/ page 110) or
Ad aptive Highbeam Assist Plus
(/ page 111) è
ECO start/stop function (/ page 139)
The following displa ysmay also be shown in the
fo ot er of the displa y:
R Xj YAc tive Parking Assist (/ page 170)
R ë HOLD function (/ page 164)
R Maximum permitted speed of 120 km/h
ex ceeded (for cer tain countries only)
R è Rear wind owwiper switched on
(/ page 118) A
A
djus
djusting t ting t he ins
he ins tr
trument lighting
ument lighting The displa
yson the inst rument cluster are illumina-
te d during the da y.A dimming function is not pos-
sible in da ylight.
The light sensor on the inst rument cluster auto-
matically controls the brightness of the display
lighting.
When the light has been switched on, the bright-
ness control is in0uenced bythe ambient light. Yo u
can then adjust the brightness of the inst rument
lighting and the display lighting with controller 1
as well. #
Turn cont roller 1up or down. Ov Ov
er
ervie
vie w of menus on t
w of menus on t he on-boar
he on-board com
d comput
puter
er
Use theò steering-wheel button tocall up the
list of menus and select a menu.
Yo u can /nd operating information in "Overview
and operation of the on-board computer"
(/ page 181). Instrument cluster and on-board computer
183 183

#
Use the: or9 button toscroll thro ugh
th e names.
If yo u press and hold the button for longer than
one second, the names in thete lephone book
will be displa yedqu ickly one aTer theot her.
or #
Press and hold the: or9 button for
longer than /ve seconds.
Ra pid scrolling – the name that starts with the
next letter or the pr evious letter in the alphabet
is displa yed.
Ra pid scrolling will stop when youre lease the
button or reach the end of the list. #
If onl
If onl y one t
y one t elephone number has been sav
elephone number has been sav ed
ed
f
f or a name:
or a name: pressthe6 ora button to
start dialling.
or #
If sev
If sev er
er al t
al t elephone number
elephone number s hav
s have been sav
e been sav ed
ed
f
f or a name:
or a name: pressthe6 ora button to
display thete lephone numbers. #
Use the: or9 button toselect the
te lephone number. #
Press the6 ora button tostart dial-
ling. #
T
To e
o e xit t
xit t he t
he t elephone book:
elephone book: pressthe~ or
% button.
Using r Using r edial edial #
Press the6 button toswitch tothere dial
memor y. #
Use the: or9 button toselect the
name or telephone number. #
Press the6 ora button tostart dial-
ling. #
T
To e
o e xit t
xit t he r
he r edial memo ry
edial memory :
:press the~ or
% button. Se
Se
ttings menu
ttings menu #
Press theò button tocall up the list of
menus. #
Use the: or9 button toselect the
Settings menu. #
Press thea button tocon/rm.
Yo u ha vethefo llowing options on theSettings
menu:
R Changing the settings forth e driver assistance
systems on the Assistance submenu
R Changing the settings forth eex terior lighting
on the Lights submenu R
Changing the display options on the Instrument
cluster submenu
R Setting the permanent limiter on theVe hicle
submenu
R Resetting the settings tofactory settings #
Select the desired submenu and con/ rmyour
selection.
Assist
Assist ance submenu
ance submenu #
Select a driving or driver assistance system
and con/gure a setting.
R Switching ESP ®
on/o. (/ page 154).
R Switching Tra1c Sign Assist on/o.
(/ page 174).
R Switching Active Brake Assist on/o.
(/ page 157).
R Switching Blind Spot Assist on/o.
(/ page 175)
R Adjusting ATTENTION ASSIST
(/ page 173).
R Setting Lane Keeping Assist
(/ page 176).
Lights submenu Lights submenu
The following settings are possible on the Lights
submenu:
R Switching the Intelligent Light System on/o.
(/ page 110)
R Switching between low beam forright- and leT-
sid etra1c (in vehicles with Intelli gent Light
System only) #
Use the: or9 button toselect the
Lights submenu. #
Press thea button tocon/rm. #
T To switc o switc h be
h betw
tw een lo
een lo w beam f
w beam f or r
or right- and
ight- and leT-
leT-
side
side tr
tra1c:
a1c: usethe: or9 button to
select Dipped beams Setting for.
The display will show the selected setting. #
Change the selected setting with thea but-
to n.
When youch ange the setting, the switcho ver
will not take place until the next time theve hi-
cle is stationar y.
When you switch overth e low beam forright- or
leT-sid etra1c, mo torw ay mode and the enhanced
fo g light function may not be available. This deacti-
va tion will take place only if the setting for driving
on theright or leT is the opposite toyour vehicle's
national version. Instrument cluster and on-board computer
189
189

The trans
fer of this data is used toalter how con-
te nt is displa yedto cor respond tothe driving situa-
tion.
The following position data is transmitted:
R Coordinates
R Speed
R Compass direction
R Acceleration direction This data is only transfer
red while the navigation
system is active, in order toimpr oveit (e.g. so it
can continue functioning when in a tunnel). W W
eb br ow
eb br owser ov
ser overerview
view
The web br owser is laun ched on the home screen
aTer selecting AppsorMercedes me & Apps via
z Browser. 1
URL entry
2 Bookmar ks
3 Web page, back
4 Web page, forw ards
5 Torefresh/stop
6 Options
% Some functions are countr y-dependent.
% Websites cannot be shown while theve hicle is
in motion. R
R
adio and media
adio and media Ov
Ov
er
ervie
vie w of t
w of t he symbols and functions in t
he symbols and functions in t he media menu
he media menuSymbol
Symbol
DesignationF
Designation Function
unction
Ì PlayS electtostart or continue pl aybac k.
Ë Pause Selecttopause the playbac k. 210
210
MBUX multimedia system

Symbol
Symbol
DesignationF
Designation Function
unction
Z SettingsT hefollowing additional settings
are available in theTu neIn Radio
menu:
R Selecting stream
R Logging on toor out of the
Tu neIn account
ß Favourites Select during playbacktosave
th e station cur rently set as a
fa vo urite.
Ì/Ë Play/PauseSelecttostart, stop or continue
pl ay bac k.
5 Tobrow se Selecttochoose a category and
th en a radio station. Sound se
Sound se
ttings
ttings Ov
Ov
er
ervie
vie w of functions in t
w of functions in t he Sound menu
he Sound menu The sound system is
available for all functions in
th era dio and media modes. The settings, for
ex ample forth e equaliser, e.ect the playback of all
media sources.
The following functions are available:
R Equalise r:
- Treble, mid-range and bass
R Balance and fader
R Volume:
- Automatic volume adjustment MBUX multimedia system
213 213

#
Turn theke yto position ginthe ignition lock
and remo veit from the ignition loc k. #
Use the parking brake tosecure theve hicle
against rolling away. #
Secure theve hicle bythe wheels. T
T
o
o wing ey
wing eye st
e st or
orag
ag e location
e location The
towing eye is located in theve hicle tool kit
(/ page 250). F
F
itting/r
itting/r emo
emoving t
ving t heto
he towing eye
wing eye F
F
itting and r
itting and r emo
emoving t
ving t he fr
he frontto
ont towing eye
wing eye
* NO
NOTE
TEDamage totheve hicle due toincor-
re ct use of theto wing eye When a
towing eye is used toreco ver a vehicle,
th eve hicle may be damaged in the process. #
Only use theto wing eyeto to wawa y or
to w start theve hicle. Fi
xture forth e front towing eye in the bumper #
Take theto wing eye and scr ewdriver from the
ve hicle tool kit (/ page 250).
F
F itting
itting #
Press the ar row on co ver1 and remo vecover
1 from the opening.
Yo u will see the /xture forth eto wing eye. #
Screw intheto wing eye clockwise tothe stop. #
Insert the scr ewdriver into theto wing eye and
tighten theto wing eye. #
Stow the scr ewdriver in theve hicle tool kit.
R
R emo
emo ving
ving #
Remo vethe scr ewdriver from theve hicle tool
kit. #
Insert the scr ewdriver into theto wing eye and
turn theto wing eye anti-clockwise. #
Unscr ewand remo vetheto wing eye. #
Insert co ver1 with the lug at theto p and
press it in at the bottom until it engages. #
Stow theto wing eye and the scr ewdriver with
th eve hicle tool kit.
R
R ear to
ear towing eye
wing eye Re
ar towing eye under the bumper #
When towing away or tow- starting a vehicle,
attach theto wing device torear towing eye
2 . #
Ifth eve hicle is equipped with a trailer tow
hitch, attach theto wing device tothe trailer
to w hitch (/ page 279). #
Obser vethe no tes on permissible towing me th-
ods (/ page 245). T
T
o
o w
w -st
-st ar
arting t
ting t he v
he vehicle (v
ehicle (v ehicle emerg
ehicle emerg ency st
ency st ar
art)
t) V
V
ehicles wit
ehicles wit h aut
h automatic tr
omatic tr ansmission
ansmission
* NO
NOTE
TEDamage tothe automatic transmis-
sion due to tow-starting The au
tomatic transmission may be damaged
in the process of tow- starting vehicles with
automatic transmission. #
Vehicles with automatic transmission
must not be tow- star ted. #
Obser vethe no tes and information on starting
assis tance (/ page 240).
V
V ehicles wit
ehicles wit h manual tr
h manual tr ansmission
ansmission #
Obser vethe no tes on permissible towing me th-
ods (/ page 245). Breakdown assistance
249
249

Before
tow- starting, ensure thefo llowing:
R make sure that the battery is connected and
ch arge d. The vehicle cann otbe switched on
ot herwise and there will be no steering and
braking assistance.
R use a towing bar and attach it tothe front tow-
ing eye (/ page 249) onl y.
R ifth eve hicle does not start aTer a fewsec-
onds, try a jump-starting procedure using the
battery of ano ther vehicle (/ page 240).
T
T o
o w
w -st
-st ar
arting pr
ting pr ocedure
ocedure #
Switch on the hazard warning lamps
(/ page 108). #
If necessar y,allow the engine and theex haust
system tocool down. #
Swit chon theve hicle. #
ShiT to2nd or 3rd gear. #
Release the parking brake. #
Keep the clutch pedal fully depressed when
to w- starting theve hicle. #
Release the clutch pedal slo wly. #
Immediately shiT toneutral if theve hicle
starts. #
Stop in accordance with the tra1c conditions. #
Use the parking brake tosecure theve hicle
against rolling away. #
Remo vetheto wing device. #
Remo vetheto wing eye. #
Switch o. the hazard warning lamps
(/ page 108). Electr
Electr
ical fuses
ical fuses N
No
ot
t es on electr
es on electr ical fuses
ical fuses *
N
NOOTE
TE Electrical fuses #
Obser vethe information in the supple-
ment. You may otherwise failto recog-
nise dangers. The fuse allocation
chart and the information on
th e fuses can be found in the "Fuse allocation
ch art" Supplement. V
V
ehicle t
ehicle t ool kit
ool kit Inf
Inf
or
ormation on t
mation on t he v
he vehicle t
ehicle t ool kit
ool kit The
vehicle tool kit is in there ar st owage compart-
ment.
Apart from some countr y-speci/c variants, vehi-
cles without a spare wheel are not equipped with a
tyre-changing tool.
If yo ur vehicle is equipped with a tyre-change tool
kit, you can /nd it in theve hicle tool kit in there ar
st ow age compartment.
Some tools forch anging a wheel are speci/c to
th eve hicle. For more information on which tyre-
ch ange tool kits are requ ired and appr ovedfo r per-
fo rm ing a wheel change on your vehicle, consult a
qu ali/ed specialist workshop.
Re quired tyre-change tool kits may include thefo l-
lowing, forex ample:
R Jack
R Wheel spanner
R Ratchet ring spanner
% The jack has a maximum weight of 7.5 kg
depending on theve hicle's equipment.
Yo u will /nd the maximum load capacity of the
jack stated on the adhesive label attached to
th e jac k.
The jack is maintenance-free. If there is a mal-
function, please contact a quali/ed specialist
wo rkshop. S S
t
to
o w
w ag
ag e com
e com par
partment in t
tment in t he r
he rear
ear Opening t
Opening t
he stow
he st owag
age com
e com par
partment
tment St
ow age compartment in there ar on theright-
hand side of theve hicle 250
250
Breakdown assis
tance

Inf
Inf
or
ormation on noise or unusual dr
mation on noise or unusual dr iving c
iving char
harac-
ac-
t
t er
er is
istics
tics
While driving, pay attention tovibrations, noises
and unusual driving characteristics, e.g. pulling to
one side. This may indicate damage tothe wheels
or tyres. If you suspect that a tyre is defecti ve,
re duce your speed. Stop theve hicle as soon as
possible tocheck if wheels and tyres ha vebeen
damaged or are no longer functioning proper ly.
Hidden tyre dama gecould also be causing the
unusual driving characteristics. If no signs of dam-
age can be de tected, ha vethe tyres and wheels
ch ecked at a quali/ed specialist workshop. N
No
ot
tes on r
es on r egularl
egularly inspecting wheels and tyr
y inspecting wheels and tyr es
es&
W
WARNING
ARNING Risk of injury due todamaged
tyres
Damaged tyres can cause tyre pressure loss. #
Check the tyres regular lyfor signs of
damage and replace any damaged tyres
immediatel y. Check
the wheels and tyres of your vehicle for
damage regular ly, i.e. at least everytwo weeks, as
we ll as aTer driving o.- road or on rough roads.
Damaged wheels can lead toa loss of tyre pres-
sure.
Look out forth efo llowing types of damage, for
ex ample:
R cuts in the tyres
R punctures in the tyres
R tears in the tyres
R bulges on tyres
R deformation or se vere cor rosion on wheels &
W WARNING
ARNING Risk of aquaplaning due to
insu1cient tyre tread
Insu1cient tyre tread will result in reduced tyre
gr ip.
The risk of aquaplaning is increased on wet
ro ads, especially when the speed of theve hicle
is not adap tedto suit the conditions. #
Thus, you should regular lych eck the
tread dep thand the condition of the
tread across the entire width of all tyres. Minimum tread dep
thfor:
R Summer ty res: 3 mm
R M+S tyres: 4 mm #
For saf etyre asons, replace the tyres
before the legall y-prescribed limit forthe
minimum tread dep thisreached. Conduct
thefo llowing checks regular lyon all
wheels, at least once a month or as requ ired, e.g.
before a long journey or when driving o.- road:
R check the tyre pressure (/ page 253)
R check theva lve caps
Va lves must be pr otected from moisture and
dirt with valve caps speci/cally appro vedby
Mercedes-Benz foryo ur vehicle.
R visually inspect the tread dep thand the tyre
tread across the whole tyre width
The minimum tread dep thfor summer tyres is
3 mm and for winter tyres 4 mm. Inf
Inf
or
ormation on dr
mation on dr iving wit
iving with summer tyr
h summer tyr es
es
At temp eratures below 10 °C summer tyres lose
elasticity and therefore traction and braking po wer.
Change the tyres on your vehicle toM+S tyres.
Using summer tyres at very cold temp eratures
could cause tears toform ,th ereby damaging the
tyres permanentl y.Mercedes-Benz cannot accept
re sponsibility forth is type of damage.
Once you ha ve/tted the summer tyres:
R Check the tyre pressures (/ page 253)
R Restart the tyre pressure monitor
(/ page 258) Inf
Inf
or
ormation on M+S tyr
mation on M+S tyr es
es
At temp eratures below 10 °C, use winter tyres or
all-season tyres that are mar ked with M+S.
Only winter tyres bearing thei snow0ake sym-
bol in addition tothe M+S marking pr ovide the
best possible grip in wintry road conditions.
Only these tyres allow driving saf ety systems such
as ABS and ESP ®
to also function optimal lyin win-
te r. These tyres ha vebeen de veloped speci/cally
fo r driving in sno w.
Use M+S tyres of the same make and tread on all
wheels tomaintain safe handling characteristics.
Obser vethe maximum permissible speed speci/ed
fo rth e M+S tyres you ha ve/tted. 252
252
Wheels and tyres

#
Using the wheel wrench, loosen the wheel
bolts on the wheel you wish tochange by
about one full turn. Do not unscr ewthe wheel
bolts. #
Raise theve hicle (/ page 262). R
R
aising t
aising t he v
he vehicle when c
ehicle when c hanging a wheel
hanging a wheel &
W
WARNING
ARNING Risk of injury from inco rrect
positioning of the jack
If yo u do not position the jack cor rectly at the
appropriate jacking point of theve hicle, the
jack could tip with theve hicle raised. #
Only position the jack at the appropriate
jacking point of theve hicle. The base of
th e jack must be positioned vertically
under the jacking point of theve hicle. &
W
WARNING
ARNING Risk of injury from vehicle tip-
ping
On slopes, the jack could tip with theve hicle
ra ised. #
Neverch ange a wheel on a slope. #
Consult a quali/ed specialist workshop. *
N
NOOTE
TE Vehicle damage from the jack If
yo u do not position the jack cor rectly at the
appropriate jack support point of theve hicle,
th e jack could tip over with theve hicle raised. #
The jack is designed exclusively for jac k-
ing up theve hicle at the jack support
points. R R
eq eq uir
uir ements:
ements:
R There are no persons in theve hicle.
R The vehicle is prepared forch anging a wheel
(/ page 261).
Impor tant no tes on using the jack:
R Only use theve hicle-speci/c jack that has
been tested and appro vedby Mercedes-Benz
to raise theve hicle. If the jack is used incor-
re ctl y,it could tip over while theve hicle is
ra ised.
R The jack is designed only toraise theve hicle
fo r a short time while a wheel is being changed
and is not suitable for car rying out mainte-
nance workunder theve hicle.
R Avoid changing a wheel on uphill and downhill
slopes. R
The jack must be placed on a /rm, 0at and
non-slip sur face. If necessar y,use a lar ge, 0at,
load bearing and non-slip underla y.
R The base of the jack is positioned vertically
under the jack support point.
Saf ety inst ructions while theve hicle is raised:
R Do not put your hands or feet under theve hi-
cle.
R Do not lie underneath theve hicle.
R Do not start theve hicle and do not release the
parking brake.
R Do not open or close any doors. Jacking points
1(rubber stoppers) are located
behind the front wheel ar ches and in front of the
re ar wheel ar ches. #
Place jack 2beneath cor responding jack
support point 1. #
Turn handwheel 3until the plate of jack 2
sits securely on jack support point 1. #
Ensure that the base of jack 2is positioned
ve rtically under jacking point 1. #
Assemble adap ter4 and ratchet 5from the
ve hicle tool kit. #
Place adap ter4 and ratchet 5onthe he xa-
gon nut of jack 2sothat the lettering
AU F/UP is visible. #
Turn ratchet wrench 5intheAU F/UP direc-
tion until the tyre is raised a maximum of 3 cm
o. thegr ound.
When doing so, jack 2may mo vetoone of
th e side support sur faces. 262 262
Wheels and tyres