change time MERCEDES-BENZ V-CLASS 2021 Owner's Manual

%
It may be a moment before theve hicle starts
to brake tothe set speed. Take this delay into
account when setting the speed with the
cruise cont rol le ver.
Deactiv
Deactiv ating DSR
ating DSR #
Press the1 button.
The indicator lamp in the button goes out.
% Ifyo u drive faster than 45 km/h, the DSR
switches o. automaticall y.A
A
ctiv
ctiv e Dist
e Dist ance Assis
ance Assis t DIS
t DISTR
TR ONIC
ONIC F
F
unction of A
unction of A ctiv
ctive Dist
e Dist ance Assis
ance Assis t DIS
t DISTR
TRONIC
ONIC
Ac tive Distance Assist DISTRONIC maintains the
set speed on free-0owing roads. If vehicles ahead
are de tected, the set distance is maintained, if
necessary until theve hicle comes toa halt. The
ve hicle accelerates or brakes, depending on the
distance totheve hicle in front and the set speed.
The speed and distance totheve hicle in front are
set and sa ved using the cruise control le ver.The
speed can be set in thera nge between 20 km/h
and 200 km/h.
Other features of Active Distance Assist
DISTRONIC:
R Depending on the preselected distance,
DISTRONIC inter venes either dynamically
(short distance) or tosave fuel (long distance).
R Depending on theve hicle mass de tected, the
dynamics of the DISTRONIC inter vention are
re duced.
R The driving style is adap ted depending on the
drive prog ram selected.
R Acceleration tothe stored speed is initiated if
th e turn signal indicator is switched on to
ch ange totheove rtaking lane. Obser
vethe no tes on driving systems and your
re sponsibility; you may otherwise failto recognise
dangers (/ page 152).
Syst
Syst em limits
em limits
The system may be impaired or may not function in
th efo llowing situations, forex ample:
R in sno w,rain, fog or heavy spr ay
R ifth ere is dirt on thera dar sensors or they are
co vered
R ifth ere is inter fere nce from radar sources or
strong radar re0ections, forex ample in multi-
stor eycar par ks
R in tra1c situations where frequent speed
changes are requ ired, e.g. in heavy tra1c or on
winding roads or o.-road
R onroads with steep downhill or uphill gradients
R on winding roads
The system cann otdetect stationary objects
unless these wereprev iously de tected as moving.
In addition, on slippery or slick roads, braking or
accelerating can cause one or se veral of the drive
wheels tolose traction and theve hicle can then
skid.
Do not use Active Distance Assist DISTRONIC in
th ese situations. &
W WARNING
ARNING Risk of accident from accelera-
tion or braking byActive Distance Assist
DISTRONIC
Ac tive Distance Assist DISTRONIC may accel-
erate or brake in thefo llowing cases, forex am-
ple:
R Ifth eve hicle pulls away using Active Dis-
ta nce Assist DISTRONIC.
R Ifth e stored speed is called up and is con-
siderably faster or sl owerthan the cur-
re ntly driven speed.
R IfAc tive Distance Assist DISTRONIC no
longer de tects a vehicle in front or does
not react toreleva nt objects. #
Always carefully obser vethe tra1c con-
ditions and be ready tobrake at all times. #
Take into account the tra1c situation
before calling up the stored speed. Driving and parking
161
161

In trailer mode,
the guide lines are shown at
th e le vel of the trailer hitch.
T
T r
railer vie
ailer vie w (v
w (vehicles wit
ehicles wit h a tr
h a trailer hitc
ailer hitc h)
h)
The trailer view displa ys the trailer hitch ball head
and a locating guide for manoeuvring. 1
Yellow guide line, locating aid
2 Red guide line at a distance of appr oximately
0.3 m tothe ball head of the trailer hitch
3 Ball head of the trailer hitch
Side camer
Side camer a views
a vie ws
The front or rear sides of theve hicle can be seen
in these vie ws. Example:
forw ard-facing side cameras (front wheel
view)
1 Guide line of extern al vehicle dimensions with
outside mir rors folded out (leT side of the
ve hicle)
2 Guide line of extern al vehicle dimensions with
outside mir rors folded out (right side of the
ve hicle)
Syst
Syst em limits
em limits
The 360° Camera will not function or will only par-
tial lyfunction in thefo llowing situations:
R ifth e doors or tailgate are open
R ifth eex terior mir rors are folded in
R ifth ere is heavy rain, snow or fog
R ifth e light conditions are poor, e.g. at night
R ifth e cameras are exposed tovery bright light,
white lines may appear in the camera image R
ifth e camera lens is co vered, dirty or misted
up.
R if cameras, or vehicle components in which the
cameras are /tted, are damaged. Ha vethe
cameras, their positions and their setting
ch ecked at a quali/ed specialist workshop.
% Do not use the 360° Camera under such cir-
cumstances. You could otherwise injure others
or collide with objects when parking theve hi-
cle.
% Have the media display repaired or replaced if,
fo rex ample, pixel er rors conside rably restrict
its use.
If yo uch ange wheel size on your vehicle, check it
is assigned tothe cor rect wheel size category
(/ page 260). If the assignment changes without
re coding the control units in theve hicle, the 360°
Camera cannot calibrate proper ly. The guide lines
at road le vel or at the le vel of the trailer coupling
will then not be displa yed cor rectl y.
See the no tes on cleaning the 360° Camera
(/ page 232).
Switc
Switc hing t
hing t he 360° Camer
he 360° Camer a on or
a on oro.
o.
R
R eq
eq uir
uir ements:
ements:
R The vehicle is switched on.
R The multimedia system is activated.
R You are driving at moderate speeds.
A
A ctiv
ctiv ating
ating #
Press theÔ button.
or #
Ifth e automatic camera view function is activa-
te d in the multimedia system, engage reve rse
ge ar (/ page 170). Driving and parking
169
169

mer
geinto tra1c on your ow n.PA RKTRONIC is still
av ailable. A
A
TTENTION ASSIST
TTENTION ASSIST F
F
unction of A
unction of A TTENTION ASSIST
TTENTION ASSIST
AT TENTION ASSIST can assist you on long, monot-
onous journe ys, e.g. on mo torw ays and trunk
ro ads. If ATTENTION ASSIST de tects indicators of
fa tigue or increased lapses in concentration on the
part of the driver, it suggests taking a break.
AT TENTION ASSIST is only an aid. It cannot alw ays
de tect dr owsiness or increased lapses in concen-
tration in good time. The system is not a substitute
fo r a well-rested and attentive driver. On long jour-
ne ys,ta ke regular and timely breaks that allow you
to rest prope rly.
If fatigue or increased lapses in concentration are
de tected, theATTENTION ASSIST: Take a break!
wa rning appears in the instrument cluster.
Yo u can ackno wledge the message and take a
break if necessar y.Ifyo u do not take a break and
AT TENTION ASSIST continues todetect increasing
lapses in concentration, you will be warned again
aTer a minimum of 15 minutes.
If a warning is displa yed in the inst rument cluster,
th e multimedia system o.ers tosear chfor a rest
area. You can select a rest area and start naviga-
tion tothis rest area. This function can be activa-
te d and deactivated in the multimedia system. Yo
u can ha vethe cur rent ATTENTION ASSIST
assessment displa yed using theAssistance
graphic menu in the on-board computer
(/ page 184).
The following information is displa yed:
R the journey length since the last break
R the attention le vel de term ined byATTENTION
ASSIS T:
- the fuller the bar is, the higher the de tected
attention le vel is
- the bar em pties as attentiveness decreases If
AT TENTION ASSIST cannot calculate the atten-
tion le vel and cannot issue a warning, theSystem
suspended message appears.
The bar display is then dimmed. This is the case,
fo rex ample, if you are predominantly driving at a
speed below 60 km/h or abo ve200 km/h.
Syst
Syst em limits
em limits
AT TENTION ASSIST is active in the 60 km/h to
200 km/h speed range.
The functionality of ATTENTION ASSIST is restric-
te d, and warnings may be dela yed or not occur at
all, in thefo llowing situations:
R the journey lasts less than appr oximately 30
minutes
R thero ad condition is poor (une venro ad sur-
fa ce or po tholes)
R theve hicle is subjected toa st rong crosswind
R you ha vea sporty driving st yle (high cornering
speeds or high rates of acceleration)
R the time is set incor rectly
R youch ange lanes and vary your speed fre-
qu ently in active driving situations
The ATTENTION ASSIST dr owsiness or alertness
assessment is dele ted and restar ted when continu-
ing the journey in thefo llowing situations:
R You switch o. theve hicle.
R Ifyo u unfasten your seat belt and open the
driver's door (e.g. tochange drivers or take a
break).
Deactiv
Deactiv ating or activ
ating or activ ating A
ating ATTENTION ASSIST
TTENTION ASSIST
On-board computer:
4 ò 5
Settings 5
Assistance
5 ATTENTION ASSIST #
Change the setting and con/ rmusing thea
button.
When ATTENTION ASSIST is deactivated, the
é symbol appears in the assistance graphic
in the inst rument cluster displa y.
Yo u can choose between thefo llowing settings:
R Off
R Standard: normal system sensitivity.
R Sensitive: higher system sensitivity. The driver
iswa rned earlier and the attention le vel de tec-
te dby the system is adap ted accordingl y. Driving and parking
173 173

Lane K
Lane K
eeping Assist
eeping Assist F
F
unction of Lane K
unction of Lane K eeping Assist
eeping Assist
Lane Keeping Assist ser vesto protect you against
unintentionally leaving your lane. You are also
wa rned bya noticeable vib ration in the steering
wheel and bythe status symbol 0ashing in the
inst rument cluster. Lane Keeping Assist is only an
aid and is not intended tokeep theve hicle in the
lane without the driver's cooperation.
Obser vethe no tes on driving systems and your
re sponsibility; you may otherwise failto recognise
dangers (/ page 152).
The function is available in the speed range
between 60 km/h and 200 km/h.
The warning is issued when thefo llowing condi-
tions are met at the same time:
R If Lane Keeping Assist de tects lane markings.
R If a front wheel drives over lane markings.
To ensure that you are warned only when neces-
sary and in good time if you cross the lane mar k-
ing, the system de tects cer tain conditions and
wa rnsyo u accordingl y.
The warning vibration occurs earlier under thefo l-
lowing conditions:
R you approach the outer lane marking on a
bend.
R thero ad has very wide lanes, e.g. a mo torw ay.
R the system de tects solid lane markings.
The warning vibration occurs later under thefo l-
lowing conditions:
R you are driving on a road with nar row lanes.
R you cut the corner on a bend.
Syst
Syst em limits em limits
The system may be impaired or may not function in
th efo llowing situations:
R Ifth ere is poor visibility, e.g. due toinsu1cient
illumination of the road, if there are highly vari-
able shade conditions or in rain, sno w,fog or
spr ay.
R Glare from oncoming tra1c, direct sunlight or
re 0ections.
R Thereis dirt on the windscreen in the vicinity
of the multifunction camera or the camera is
misted up, damaged or obscured.
R No or se veral unclear lane markings are pres-
ent for one lane, e.g. in a construction area. R
Ifth e lane markings are wornawa y,dark or
co vered up.
R Ifth e distance totheve hicle in front is too
short and thus the lane markings cannot be
de tected.
R The lane markings change quickl y,e.g. lanes
branch o., cross one ano ther or mer ge.
R The ca rriag ewa y isvery nar row and winding.
A
A ctiv ctiv ating/deactiv
ating/deactiv ating Lane K
ating Lane Keeping Assist
eeping Assist #
Press theÇ button.
If th e indicator lamp in the button is lit, Lane
Ke eping Assist is activated. If all conditions
ha ve been satis/ed, there may be a warning.
If Lane Keeping Assist is activated and you are
driving at speeds abo ve60 km/h and lane
markings are de tected, the lines in the assis-
ta nce display menu of the on-board computer
are shown in green. Lane Keeping Assist is
re ady for use.
When the system switches over, theLane
Keeping Assist on orLane Keeping Assist off
message is shown brie0y in the inst rument
cluster displa y.
% You can /nd information on the assistance
gr aphic menu under "Assistance graphic"
(/ page 184).
Se
Se tting t
tting t he sensitivity of Lane K
he sensitivity of Lane K eeping Assist
eeping Assist
On-board computer:
4 ò 5
Settings 5
Assistance
5 Lane Keeping Assist #
Select theStandard orAdaptive setting. 176
176
Driving and parking

In
theStandard setting, no warning vibration
occurs in thefo llowing situations:
R you operate the turn signal in the cor respond-
ing direction. In this event, thewa rnings are
suppressed for a cer tain period of time.
R a driving saf ety system in tervenes or regulates,
such as ABS, BAS or ESP ®
.
In theAdaptive setting,there will also be no warn-
ing vibration in thefo llowing situations:
R you accelerate hard, e.g. kickdown.
R you brake hard.
R you steer activel y,e.g. swer vetoavo id an
obstacle or change lane quickl y.
R you cut the corner on a sharp bend. T
T
r
railer oper
ailer oper ation
ation N
No
ot
tes on tr
es on tr ailer oper
ailer oper ation
ation &
W
WARNING
ARNING Risk of accident and injury if
th eto ngue weight is exceeded
The car rier system may de tach from theve hi-
cle, thereby endangering other road users. #
Always comply with the permissible
to ngue weight when using a car rier. Yo
u can /n dspeci/cations rega rding the ball neck
on the trailer's identi/cation plate. You can /nd
speci/cations rega rding the trailer on theto wing
ve hicle's identi/cation plate and in theTe ch nical
Data (/ page 279).
Yo u can attach car rier systems such as a bicycle
ra ck or load-bearing implement tothe ball nec k.
When using car rier systems on the ball nec k, the
maximum load capacity is 75 kg.
If th e trailer coupling is de tach able, it is essential
to comply with the operating inst ructions of the
trailer coupling manufactu rer.
Place your vehicle/trailer combination on sur faces
th at are as even as possible and secure it against
rolling away (/ page 150). Couple and uncouple
th e trailer carefull y. No
tethefo llowing rega rding theto ngue weight:
R Make full use of the maximum tongue weight,
where possible.
R Neverfa ll below a legally prescribed minimum
to ngue weight; theto ngue weight must alw ays
be positive.
R Do not exceed or fall below the permissible
to ngue weights – this must be obser ved during
loading and unloading of the trailer.
Do not exceed thefo llowing values:
R Perm itted braked or unbraked towing capacity
The maximum permissible towing capacity for
unbraked trailers is 750 kg.
R Perm issible rear axle load of theto wing vehicle
R Perm issible gross weight of theto wing vehicle
R Perm issible gross weight of the trailer
R Perm issible gross combination weight
R Maximum permissible speed of the trailer
The releva nt permitted values, which must not be
ex ceeded, can be found in thefo llowing places:
R Inyour vehicle documents
R Onthe identi/cation plate of the trailer hitch
R Onthe trailer's identi/cation plate
R Ontheve hicle identi/cation plate
If th ere are discrepancies between theva lues, the
lo we st one shall appl y.
Before driving o., ensure thefo llowing:
R The tyre pressure on there ar axle of theto w-
ing vehicle has been set forth e maximum load.
R The headlamps ha vebeen set cor rectl y.
Comply with the maximum permissible speed of
80 km/h or 100 km/h, even in countries in which
higher speeds are permitted forve hicle/trailer
combinations.
% During trailer operation, remember that
PA RKTRONIC is available only toa limi ted
ex tent, if at all.
% The height of the ball head will change
depending on theve hicle's load. In this case,
use a trailer with a height-adjustable dr awbar. Driving and parking
177
177

No
change of direction announced
1 Distance tothe next destination
2 Expected ar riva l time
3 Distance tothe next change of direction
4 Name of cur rent road Change of direction announced with lane
recom-
mendation
1 Road towhich thech ange of direction leads
2 Distance tothech ange of direction
3 Change-of-direction symbol
4 Recommended lane and new lane during a
ch ange of direction (white)
5 Possible lane (light grey)
6 Lane not recommended (dark grey)
If th e digital map contains the cor responding data,
lane recommendations for upcoming changes of
direction can be displ ayed in the case of multi-lane
ro ads. New lanes may be added during thech ange
of direction.
Lane not recommended 6: inthis lane, you will
not be able tocomple tethe next change of direc-
tion without changing lane.
Po ssible lane 5: inthis lane will you be able to
comple tethe next change of direction.
Re commended lane 4: inthis lane, you will be
able tocomple teboth th e next change of direction
and the one aTer that. Change of direction without lane
recommendation
1 Road towhich thech ange of direction leads
2 Distance tothech ange of direction and dis-
ta nce indicator graphic
3 Change-of-direction symbol
When a change of direction is made, you will see
distance indicator graphic 2in addition to
ch ange-of-direction symbol 3. This willreduce in
size from bottom to top as you approach the
announced change of direction. When the distance
indicator runs out, thech ange of direction will
begin. Change of direction with lane
recommendation
1 Road towhich thech ange of direction leads
2 Distance tothech ange of direction and dis-
ta nce indicator graphic
3 Change-of-direction symbol
4 Lane recommendation
The following additional navigation status displa ys
are possible:
R New route... orCalculating route…
A new route is being calculate d.
R Road not mapped
The vehicle's position is within the area of the
digital map, but thero ad is not known, e.g.
unpa vedro ads (o.-road).
R No route
Noroute tothe selected destination could be
calculated.
R O 186 186
Instrument cluster and on-board computer

Yo
u ha vereached the destination or an inter-
mediate destination. R
R
adio menu
adio menu 1
Frequency band
2 Channel with memory preset
3 Artist's name
4 Name of track #
Switch on the multimedia system. #
Press theò button tocall up the list of
menus. #
Use the: or9 button toselect the
Radio menu. #
Press thea button tocon/rm.
The display will show the station cur rently
selected 2. #
T
T o open t
o open t he st
he station list
ation list :
:brie0y press the:
or 9 button. #
T
T o select a st
o select a st ation in t
ation in the st
he st ation list
ation list: :brie0y
press the: or9 button. #
T
T o select a st
o select a st ation in t
ation in the st
he st ation lis
ation list wit t with r
h rapid
apid
scr
scr oll:
oll: press and hold the: or9 but-
to n. #
T
T o select a fr
o select a fr eq
eq uency band or st
uency band or st ation memory
ation memory:
:
brie0y press thea button. #
Use the: or9 button toselect a fre-
qu ency band or station memor y.#
Press thea button tocon/rm.
% You can /nd fur ther information, e.g. about
saving stations and about DABradio mode
(Digital Audio Broadcasting), in "Radio"
(/ page 212). Media menu
Media menu
#
Switch on the multimedia system. #
Press theò button tocall up the list of
menus. #
Use the: or9 button toselect the
Media menu. #
Press thea button tocon/rm.
Changing t
Changing t he media sour
he media sour ce
ce
Yo u can change the media source and the pla y-
back type (audio, video or TV) in theMedia menu. #
T
To open/close t
o open/close t he media sour
he media source list
ce list::brie0y
press thea button.
Depending on theve hicle equipment, the list
will show thefo llowing media sources, for
ex ample:
R Memo rycard (SD or SDHC)
R Media register
R USB storage devices
R Blue tooth ®
audio equipment
% Obser vethe additional information on media
support in "Media" (/ page 210).
Oper
Oper ating dat
ating dat a st
a stor
orag
ag e media
e media 1
Media source, e.g. the name of the USB 0ash
drive
2 Current track
3 Artist's name
4 Name of album
5 Folder name
Depending on theve hicle's equipment, you can
play back audio /les from di.erent data storage
media. #
T
To select a dat
o select a dat a st
a stor
orag
ag e medium:
e medium: brie0y press
th ea button.
The display will show the list of media sources. #
Press the: or9 button toselect a data
storage medium. #
Press thea button tocon/rm. #
T
To open t
o open t he tr
he trac
ack list
k list: :brie0y press the: or
9 button. Instrument cluster and on-board computer
187
187

#
Use the: or9 button toscroll thro ugh
th e names.
If yo u press and hold the button for longer than
one second, the names in thete lephone book
will be displa yedqu ickly one aTer theot her.
or #
Press and hold the: or9 button for
longer than /ve seconds.
Ra pid scrolling – the name that starts with the
next letter or the pr evious letter in the alphabet
is displa yed.
Ra pid scrolling will stop when youre lease the
button or reach the end of the list. #
If onl
If onl y one t
y one t elephone number has been sav
elephone number has been sav ed
ed
f
f or a name:
or a name: pressthe6 ora button to
start dialling.
or #
If sev
If sev er
er al t
al t elephone number
elephone number s hav
s have been sav
e been sav ed
ed
f
f or a name:
or a name: pressthe6 ora button to
display thete lephone numbers. #
Use the: or9 button toselect the
te lephone number. #
Press the6 ora button tostart dial-
ling. #
T
To e
o e xit t
xit t he t
he t elephone book:
elephone book: pressthe~ or
% button.
Using r Using r edial edial #
Press the6 button toswitch tothere dial
memor y. #
Use the: or9 button toselect the
name or telephone number. #
Press the6 ora button tostart dial-
ling. #
T
To e
o e xit t
xit t he r
he r edial memo ry
edial memory :
:press the~ or
% button. Se
Se
ttings menu
ttings menu #
Press theò button tocall up the list of
menus. #
Use the: or9 button toselect the
Settings menu. #
Press thea button tocon/rm.
Yo u ha vethefo llowing options on theSettings
menu:
R Changing the settings forth e driver assistance
systems on the Assistance submenu
R Changing the settings forth eex terior lighting
on the Lights submenu R
Changing the display options on the Instrument
cluster submenu
R Setting the permanent limiter on theVe hicle
submenu
R Resetting the settings tofactory settings #
Select the desired submenu and con/ rmyour
selection.
Assist
Assist ance submenu
ance submenu #
Select a driving or driver assistance system
and con/gure a setting.
R Switching ESP ®
on/o. (/ page 154).
R Switching Tra1c Sign Assist on/o.
(/ page 174).
R Switching Active Brake Assist on/o.
(/ page 157).
R Switching Blind Spot Assist on/o.
(/ page 175)
R Adjusting ATTENTION ASSIST
(/ page 173).
R Setting Lane Keeping Assist
(/ page 176).
Lights submenu Lights submenu
The following settings are possible on the Lights
submenu:
R Switching the Intelligent Light System on/o.
(/ page 110)
R Switching between low beam forright- and leT-
sid etra1c (in vehicles with Intelli gent Light
System only) #
Use the: or9 button toselect the
Lights submenu. #
Press thea button tocon/rm. #
T To switc o switc h be
h betw
tw een lo
een lo w beam f
w beam f or r
or right- and
ight- and leT-
leT-
side
side tr
tra1c:
a1c: usethe: or9 button to
select Dipped beams Setting for.
The display will show the selected setting. #
Change the selected setting with thea but-
to n.
When youch ange the setting, the switcho ver
will not take place until the next time theve hi-
cle is stationar y.
When you switch overth e low beam forright- or
leT-sid etra1c, mo torw ay mode and the enhanced
fo g light function may not be available. This deacti-
va tion will take place only if the setting for driving
on theright or leT is the opposite toyour vehicle's
national version. Instrument cluster and on-board computer
189
189

#
T
To ent
o ent er c
er char
haract
act er
ers wit
s wit h t
h the ke
he keyboar
yboar d:
d:tap on a
button. #
T
To use handwr
o use handwr iting t
iting to ent
o enter c
er char
haract
acter
ers:
s: write
th ech aracter with one /nger on the
to uchscreen. #
T
To zoom in and out of t
o zoom in and out of t he map:
he map:movetwo /n-
ge rs toget her or apart. #
T
To enlarg
o enlarg e or r
e or reduce t
educe t he size of a section of a
he size of a section of a
w
w ebsit
ebsit e:
e:mo vetwo /n gers toget her or apart. #
T
To call up a global menu in t
o call up a global menu in t he applications:
he applications:
to uch theto uchscreen and hold until the
OPTIONS menu appears.
On t
On t he t
he touc
ouchpad
hpad 1
G Returns tothe pr evious display
2 ~ Calls up the control menu of the last
active audio source
3 © Shows th e home screen and calls up
applications
4 Touchpad #
T
To na
o na vig
vigat
ate in menus:
e in menus: swipe up, down, leT or
ri ght. #
T
T o select an entry
o select an entry :
:press on the entr y. #
T
To ent
o ent er a c
er a c har
har act
acter
er:
:enter a character using
th eke ypad.
or #
Write a character on theto uchpad. #
T
To mov
o mov e t
e the digit
he digit al map:
al map: swipe in any direc-
tion. Calling up applications using butt
Calling up applications using butt
ons
ons 1
% Calls up thete lephone
2 z Calls up the navigation or map
3 | Pressing repeatedly calls up the desired
audio source
4 ´ Setsvehicle functions
5 ß Calls up favo urites #
Press one of the buttons. F
F
unction of LIN
unction of LIN GUA
GUATR
TRONIC
ONIC If
yo u use thevo ice control system in an emer-
ge ncy your voice can change and your telephone
call, e.g. an emer gency call, can thereby be unnec-
essarily dela yed.
Fa miliarise yourself with thevo ice control system
functions before starting the journe y.
Wi th LINGU ATRO NIC, various applications of the
MBUX multimedia system can be ope ratedby
vo ice input. LINGU ATRO NIC is operational appr ox-
imately thirty seconds aTer theve hicle is switched
on and is available from the driver's and front pas-
senger's seat.
The following applications of the multimedia sys-
te m can be operated:
R Navigation
R Telephone
R Radio
R Media pla yer
R Messages
R Vehicle functions S S
t
tar
ar ting LIN
ting LIN GUA
GUATR
TRONIC
ONIC #
Press the£ rock er switch up on the multi-
function steering wheel.
Yo u can say a voice command aTer the acous-
tic signal. 198 198
MBUX multimedia system

#
Enter the destination in 2.
The sear chresults are displa yed. #
Select the destination in list 3.
The de tailed view forth ero ute is displa yed. Calculating a r
Calculating a r
out
oute and using se
e and using se ttings f
ttings for r
or route
oute
guidance
guidance R
R
eq
eq uir
uir ements:
ements:
R The destination has been entered.
R The destination address is shown.
R F
For t
or t he commut
he commut er r
er rout
oute:
e:you ha vecreated a
pro/le (/ page 199).
R The Allow destination suggestions option is
switched on .
R The Activate commuter route option is
switched on.
R The multimedia system has gathered su1cient
data in order toshow destination suggestions.
R Routes ha vebeen learned forth ese destination
suggestions.
Multimedia system: 4 © 5
Navigation 1
¥ Noroute yet
¦ Aro ute has been mapped #
Select ¥.
The route tothe destination is calculated.
Ro ute guidance begins.
or #
Select ¦. #
Select Set as intermediate dest..
The destination address is set as the next inter-
mediate destination.
or #
Select Start new route guidance.
The destination address is set as the new des-
tination. The pr evious destination and the inter-
mediate destinations are dele ted. Ro ute guid-
ance tothe new destination begins. Selecting r
Selecting r out
oute se
e se ttings
ttings #
Select Z. #
Select Advanced. #
Select Route. #
Select thero ute type. #
Take tra1c in form ation into consideration with
Dynamic route guidance r. #
Selecting route options with Avoid options. #
Activate Alternative routes.
Alternative routes are calculate dfo rev ery
ro ute. #
Activate Activate commuter route .
If th ere qu irements for a commuter route are
met, the multimedia system automatically
de tects that theve hicle is on a commuter
ro ute. Route guidance begins without voice
output. Using map functions
Using map functions
Multimedia system:
4 © 5
Navigation
Enlar
Enlar ging t
ging t he map scale
he map scale #
When the map is shown, tap twice quickly with
one /n geronthe media displa y.
or #
Movetwo /n gers apart on the media displa y.
R
R educing t
educing t he map scale
he map scale #
Tap with two /ngers on the media displa y.
or #
Movetwo /n gers toget her on the media dis-
pla y.
Mo
Mo ving t
ving t he map
he map #
Moveone /nger in any direction on the
to uchscreen. #
T
To r
o r ese
ese t t
t the map t
he map t o t
o the curr
he curr ent v
ent vehicle posi-
ehicle posi-
tion:
tion: press \brie0y.
Selecting map or
Selecting map or ient
ientation
ation #
Press theÄ compass symbol repeatedly on
th e map.
The view changes in the sequence 3D,2D
heading up to2D north up .
Switc
Switc hing mot
hing mot orwa
or wa y inf
y inf or
ormation on or
mation on or o.
o. #
Select Z. #
Activate or deactivate Motorway information . MBUX multimedia system
205
205