display MERCEDES-BENZ V-CLASS 2021 Repair Manual

#
Have the security key displa yed on the device
to be connected (see the manufacturer's oper-
ating inst ructions). #
Enter this security key on the multimedia sys-
te m. #
Con/rm the entry with ¡.
Connecting using a WPS PIN
Connecting using a WPS PIN #
Select the options rofthe desired Wi-Fi
networ k. #
Select Connect using WPS PIN input.
The multimedia system generates an eight-digit
PIN. #
Enter this PIN on the device tobe connected. #
Con/rm the entr y.
Connecting using a butt
Connecting using a butt on
on#
Select the options rofthe desired Wi-Fi
networ k. #
Select Connect via WPS PBC. #
Select "Connect via WPS PBC" in the options
on the device tobe connected (see the manu-
fa cturer's operating instructions). #
Press the WPS button on the device tobe con-
nected. #
Select Continue inthe multimedia system.
A
A ctiv
ctiv ating aut
ating aut omatic connection
omatic connection #
Select Connect via Wi-Fi. #
Select the options rofthe desired Wi-Fi
networ k. #
Activate Permanent Internet connection .
Connecting wit
Connecting wit h a kno
h a known W
wn Wi-Fi
i-Fi #
Select Connect via Wi-Fi. #
Select a Wi-Fi networ k.
The connection is established again.
Con/gur
Con/gur ing
ingt
the multimedia syst
he multimedia syst em as a W
em as a Wi-F
i-Fi ho
i ho t-
t-
spo
spo t f
t for e
or e xt
xter
er nal de
nal de vices
vices
The type of connection established depends on
th e device tobe connected. The function must be
suppor tedby the multimedia system and bythe
device tobe connected. #
Select Vehicle hotspot. #
Select Connect device to vehicle hotspot .#
Select the type of connection tobe established
on the multimedia system and on the device to
be connected. Connecting using WPS PIN g
Connecting using WPS PIN g ener
eneration
ation #
Select Connect using WPS PIN generation. #
Enter the PIN shown in the media display on
th e device tobe connected and con/ rm.
Connecting using WPS PIN entry
Connecting using WPS PIN entry #
Select Connect using WPS PIN input. #
Enter the PIN that is shown on theex tern al
device's displ ayon the multimedia system.
Connecting using a butt
Connecting using a butt on
on #
Select Connect via WPS PBC. #
Press the push button on the device tobe con-
nected (see the manufacturer's operating
inst ructions). #
Select Continue.
Connecting using a secur
Connecting using a secur itykey
ity key #
Select Connect device to vehicle hotspot.
A secu rity key is displa yed. #
Select theve hicle from the device tobe con-
nected. The vehicle is displa yed with the
DIRECT-MBUX XXXXX network name. #
Enter the security key which is shown in the
media display on the device tobe connected. #
Con/rm the entr y.
Connecting using NFC
Connecting using NFC #
Select Connect via NFC. #
Activate NFC on the mobile device (see the
manufacturer's operating instructions). #
Hold the device tobe connected at theve hi-
cle's NFC inter face. #
Select Finished .
The mobile device is now connected tothe
multimedia system hotspot via NFC.
Gener Gener ating a ne ating a ne w secur
w securitykey
ity key #
Select Vehicle hotspot. #
Select Generate security key. #
Select New security key.
A connection will be established wi th the newly
created security key. #
T
To sav
o sav e a secur
e a secur itykey
ity key :
:select Save.
When a new security key is sa ved, all existing
Wi -Fi connections are then disconnected. If the
Wi -Fi connections are being re-established, the
new security key must be entered. MBUX multimedia system
201
201

Ent
Ent
er
ering a des
ing a destination tination Multimedia system:
4 © 5
Navigation 5
ª Where to? 1
Count ryin which theve hicle is located
2 Entering a POI or address
Underneath: Multimedia system suggestions
during destination ent ry
During input: dele tethe entry with £.
3 List with additional destination entry options
During destination entr y:select sear chresult
4 Dele tes entered character
5 a Con/rms an ent ry
6 Calls up handwriting recognition
7 Enters a space
8 Activates voice input
9 Sets the written language
A Switches tonumbers, special characters and
symbols
B Switches toupper-case or lo wer-case letters #
Enter the destination in 2. The entries can be
made in any order.
The following entries can be made, forex ample:
R Town, st reet, house number
R Street,to wn
R Postcode
R POI name or POI ca tegory
R Contact name #
Select a sea rchre sult in list 3. #
Calculate thero ute (/ page 205). %
You can /nd fur ther information about destina-
tion entr y,e.g. 3 wordaddresses, in the Digital
Owner's Manual.
Changing t Changing t he country he country #
Select the country indicator in 1. #
Enter the country indicator. #
Select the country in 3.
Using online sear ch
Using online sear ch
% Requirements: the media display sho wsan
Internet connection with a double-ar row sym-
bol in the status line.
% Online sear chis not available in all countries.
Destination ent ryuses online map services. If the
on-board sear ch/nds no sui table destinations or if
yo uch ange countries, the online sear chisavaila-
ble.
Fo rth e destination you can enter an address, a
POI or a thre e-word address. #
Select country indicator 1. #
Select the pr ovider forth e online service from
th e countries list. #
Enter the destination in 2.
The sear chresults are displa yed. #
Select the destination in list 3.
The de tailed view forth ero ute is displa yed.
or 204 204
MBUX multimedia system

Using ser
Using ser
vices
vices R
R
eq
eq uir
uir ements:
ements:
R There is an Internet connection.
R Mercedes me connect is available.
R You ha veset up a user account in the
Mercedes me Portal.
R The vehicle is connected toa user account and
yo u ha veaccep tedth e conditions of use for
th e service.
Fu rther information can be found at: https://
www.mercedes.me
R The service is available and has been activa-
te d.
Multimedia system: 4 © 5
Navigation
Displa
Displa ying t
ying the
hetr
tra1c
a1c situation wit
situation wit h Liv
h Live
eTr
Tra1c
a1c
Inf
Inf or
ormation
mation #
Select Z. #
Activate Traffic . #
Select Advanced. #
Select View. #
Select Map elements. #
Switch on Traffic incidents, Free-flowing traf-
fic and Delay.
If tra1c information has been received, then
tra1c incidents such as roadwor ks,ro ad
bloc ks, local area reports (e.g. fog) and warn-
ing message s are displayed.
The tra1c delay is displa yedfo rth e cur rent
ro ute. Tra1c dela yslasting a period of one
minute or longer are take n into consideration.
Displa
Displa ying hazar
ying hazar d w
d war
arnings wit
nings wit h Car
h Car-t
-to-X
o-X -Commu-
-Commu-
nication
nication
If hazard warnings are available these are shown
as symbols on the map. The display depends on
th e settings forth eTraffic andTraffic incidents
options. #
Set the options.
If Traffic is switched o. and Traffic incidentsis
switched on, the symbols are shown on the
prospective route.
Displa Displa ying w
ying w eat
eather inf
her inf or
ormation and ot
mation and other map
her map
cont
cont ents
ents #
Select Z. #
Select Advanced. #
Select View. #
Select Map elements. #
Scroll up and show theONLINE MAP CON-
TENTS categor y. #
Switch on a se rvice, e.g. Weather.
Cur rent we ather information is displ ayed on
th e navigation map, e.g. temp erature or cloud
co ver.
P
P ar
ar king ser
king ser vice
vice
* NO
NOTE
TEDamage totheve hicle due tonot
observing the maximum permitted head-
ro om clearance If
th eve hicle height is greater than the maxi-
mum permitted headroom clearance, thero of
and other parts of theve hicle may be dam-
aged. #
Obser vethe signposted headroom clear-
ance. #
Ifth eve hicle height is greater than the
permitted headroom clearance, do not
enter. #
Obser vethech anged vehicle height with
add-on roof equipment. *
N NOOTE
TE Before selecting the parking option The data is based on information pr
ovided by
th ere specti veservice pr ovider.
Mercedes Benz accepts no liability forthe
accuracy of the information pr ovided relating
to the multi-s tore y car park/parking area. #
Alwa ys obser vethe local Information and
conditions. %
This service is not available in all countries. #
Tap on jonthe map. #
Select a parking option.
The map sho ws the parking options in the
vicinity. 206
206
MBUX multimedia system

Connecting pre
Connecting pre
viousl
viously aut
y author
hor ised Bluet
ised Bluet ooth
oo th®
®
audio
audio
eq
equipment uipment #
Select a Blu etoo th®
audio device from the list.
The connection is established. Ov
Ov
er
ervie
vie w of t
w of t he symbols and functions in t
he symbols and functions in t he r
he radio menu
adio menu Symbol
Symbol
Designation F
Designation Function
unction
© HomeSelecttoreturn tothe home screen.
j Messaging Select tocall up messaging.
û/ü Back/forward Selecttoskip tothe pr evious or tothe next station.
Z SettingsSelecttoshow fur ther options. Settings can be made to
th efo llowing additional functions, forex ample:
R Navigation and tra1c announcements
R Frequency /x function
R Radio additional text
R Emer gency warnings
The setting options are countr y-dependent.
2 Full screen Select toswitch totheDA B slide sh ow.
This function is not available in all countries.
8 Silent function Select toswitch o. the sound.
f Storing radio sta-
tions Select
tosave ara dio station in the station list.
4 Station lis tS electtodisplay the station list.
ª Search Selecttobrow se the active menu, forex ample, byartist
or genre. Depending on
the frequency band selected, di.er-
ent functions are available toyou.
Select the desired frequency band in thera dio
menu head runner. A
A
dditional functions of T
dditional functions of T uneIn R
uneIn Radio
adio
% Arelatively lar gevolume of data can be trans-
mitted when using TuneIn Radio. 212
212
MBUX multimedia system

N
N
o
ot
tes on maint
es on maint enance
enance
+ ENVIR
ENVIR
ONMENT
ONMENT AL NO
AL NOTE
TEEnvironmentally
pollution from disposal not in an environ-
mentally responsible manner If,
for operating reasons, individual mainte-
nance workis car ried out under your own
direction, the environmental pr otection
re qu irements must be obser ved. When dispos-
ing of operating 0uids, e.g. engine oil, the legal
re qu irements must be obser ved. This also
a.ects all parts that ha vecome into contact
with operating 0uids, e.g. /lters. #
Dispose of em pty con tainers, cleaning
clo ths and care products in an environ-
mentally responsible manner. #
Follow the inst ructions for use of care
products. #
Do not allow the engine torun longer
th an necessary when stationar y.When
working on theve hicle, comply with all
saf etyre gulations, such as the operating inst ruc-
tions, regulations concerning hazardous materials,
environmental pr otection measures, worksaf ety
and accident pr evention regulations.
Yo u must secure theve hicle on jack stands of suf-
fi cient load capacity if workis being car ried out
underneath theve hicle.
Please also referto the no tes about quali/ed spe-
cialist workshops (/ page 24).
The scope and regularity of the inspection and
maintenance workprimarily depend on the oTen
diverse operating conditions.
Yo u can obtain fur ther information concerning the
servicing of your vehicle from a quali/ed specialist
wo rkshop, e.g. a Mercedes-Benz Service Centre.
Yo u will /nd information about operating 0uids
appr ovedfo r Mercedes-Benz and capacities under
"Operating Fluids and Capacities" (/ page 271).
Obser vethe information under "Mercedes-Benz
GenuineParts" (/ page 16). Ser
Ser
vice int
vice int erv
erval display
al display Ser
Ser
vice int
vice int erv
erval displa
al displa y function
y function The ASS
YST PLUS service inter val display on the
inst rument cluster display pr ovides information on
th ere maining time or distance before the next
service due date. Under arduous operating conditions or if
theve hi-
cle is subjected toincreased loads, the ASS YST
PLUS service inter val display may shor tenthe
service inter val.
Yo u can obtain fur ther information concerning the
servicing of your vehicle from a quali/ed specialist
wo rkshop. Displa
Displa
ying t
ying the ser
he ser vice due date
vice due date R
R
eq
eq uir
uir ements
ements
R The ignition is switched on.
On-board computer: 4 Service 5
ASSYST PLUS
The next service due date is displa yed. #
T
To e
o e xit t
xit t he display
he display: :press thea or%
steering-wheel button. Inf
Inf
or
ormation on r
mation on r egular maint
egular maint enance w
enance work
ork *
N
NOOTE
TE Premature wearthro ugh failure to
obser veservice due dates Main
tenance workwhich is not car ried out at
th eright time or incomple tely can lead to
increased wear and damage totheve hicle. #
Adhere tothe prescribed service inter-
va ls. #
Always ha vethe prescribed maintenance
wo rkcar ried out at a quali/ed specialist
wo rkshop. N
No
ot
tes on special ser
es on special ser vice r
vice req
equir
uir ements
ements The prescribed service inter
val is based on normal
ve hicle use. Main tenance workwill need tobe per-
fo rm ed more oTen than prescribed if theve hicle is
operated under arduous operating conditions or
increased loads.
Arduous operating conditions include:
R regular city driving with frequent intermediate
stops
R frequent short-distance driving
R frequent operation in mountainous terrain or
on poor road sur faces
R when the engine is oTen leT idling for long
periods
R operation in particular lydusty conditions
and/or if air-recirculation mode is frequently
used Maintenance and care
223 223

In
these or similar operating conditions, ha vethe
air /lter, engine oil and oil /lter, forex ample,
re placed more frequentl y.
If th eve hicle is subjected toincreased loads, the
tyres must be checked more frequentl y.Yo u can
obtain fur ther information at a quali/ed specialist
wo rkshop. N
Non-oper
on-oper ational times wit
ational times wit h t
h the batt
he batt er
ery disconnec-
y disconnec-
t
t ed
ed The AS
SYST PLUS service inter val display can cal-
culate the service due date only when the battery
is connected. #
Display and no tedown the service due date on
th e inst rument cluster before disconnecting
th e battery (/ page 223). Engine com
Engine com
par
par tment
tment Opening and closing t
Opening and closing t
he bonnet
he bonnet &
W
WARNING
ARNING Risk of accident due todriving
with the bonnet unloc ked
The bonnet may open and blo ckyour vie w. #
Neverre lease the bonnet when driving. #
Before every trip, ensure that the engine
bonnet is loc ked. &
W
WARNING
ARNING Risk of accident and injury
when opening and closing the bonnet
The bonnet may suddenly drop into the end
position.
There is a risk of injury for an yone in the
engine bonnet's range of mo vement. #
Do not open or close the bonnet if there
is a person in the bonnet's range of
mo vement. &
W WARNING
ARNING Risk of injury from touching
components under voltage
The ignition system and the fuel injection sys-
te m wo rkunder high voltage. You could receive
an elect ric shoc k. #
Neverto uch components of the ignition
system or the fuel injection system when
th e ignition is switched on. The
following are examples of live components:
R Ignition coils
R Spark plug connectors
R Injectors &
W
WARNING
ARNING Risk of burns from hot compo-
nent parts in the engine compartment
Cer tain component parts in the engine com-
partment can be very hot, e.g. the engine, the
cooler and parts of theex haust system. #
Allow the engine tocool down and only
to uch component parts described in the
fo llowing. *
N
NOOTE
TE Damage tobonnet or windscreen
wipers when opening the bonnet If
th e windscreen wipers ha vebeen folded
back from the windscreen when the bonnet is
opened, the windscreen wipers or the bonnet
may be damaged. #
Ensure that the windscreen wipers ha ve
not been folded back from the wind-
screen. Opening t
Opening t
he bonnet
he bonnet #
Pull the handle 1torelease the bonnet. 224
224
Maintenance and care

#
Reach into thega p, push le ver2 ofthe bon-
net catch tothe leT and liT the bonnet.
When the bonnet has opened around 40 cm, it
will be automatically opened and held bythe
ga s pressure spring dampers.
Closing t
Closing t he bonnet
he bonn et &
W WARNI NG
ARNI NGRisk of /re due to0ammable
materials in the engine compartment or on
th eex haust system
Flammable materials may ignite. #
Ensure that there are no 0ammable
ex tern al materials in the engine compart-
ment or on theex haust system aTer
maintenance workhas been car ried out. *
N NOOTE
TE Damage tothe bonnet due topress-
ing it closed manually Pushing
the bonnet closed with your hands
could damage it. #
Toclose the bonnet, let it drop from the
speci/ed height. #
Lowe rth e bonnet and let it fall from a height of
appr oximately 30 cm, applying a little forc e as
yo u let it go. #
Ifth e bonnet remains slightly open, open it
again and let it fall, applying slightly more force
as you let it go, until it engages. Engine oil
Engine oil
Chec
Chec
king engine oil lev
king engine oil lev el wit
el with on-boar
h on-boar d com
d comput
puter
er
(engine wit
(engine wit hout oil dips
hout oil dipstic tick)
k)
R
R eq
eq uir
uir ements:
ements:
R The engine oil le vel is de term ined during driv-
ing.
R The engine is at normal operating temp erature.
R The vehicle is le vel during the measuring proc-
ess.
R The bonnet is not open.
Depending on the driving pro/le, the oil le vel can
be displa yed only aTer a driving time of up to
30 minutes and only when the ignition is switched
on.
On-board computer:
4 Service 5
Engine oil level
One of t One of t he f
he follo
ollowing messag
wing messag es appear
es appears on t
s on the dis-
he dis-
pla
pla y of t
y of t he on-boar
he on-boar d com
d comput
puter:
er:
Engine oil level Measurement in progress... #
Measurement of the oil le vel not yetpossible.
Re peat thequ ery aTer driving for a maximum
of 30 minutes.
Engine oil level OK
The bar for displaying the oil le vel on the display is
gr een and is between "min" and "max". #
Do not top up oil. The engine oil le vel is cor-
re ct.
Engine oil level Warm up engine #
Warm upthe engine tooperating temp erature.
Engine oil level Correct measurement only if vehi-
cle is on level ground #
Park theve hicle on a le vel sur face.
Engine oil level Add 1,0 l
The bar for displaying the oil le vel on the display is
orange and is below "min".
The oil le vel is too lo w. #
Add 1 l of engine oil (/ page 227).
Engine oil level Reduce oil level
The bar for displaying the oil le vel on the display is
orange and is abo ve"max".
The oil le vel is too high. Maintenance and care
225 225

#
Siphon o. any excess engine oil that has been
added. Todo so, consult a quali/ed specialist
wo rkshop.
For engine oil level turn on ignition #
Switch the ignition on tocheck the engine oil
le ve l.
Engine oil level System inoperative
The /ll le vel sensor is defective or not plugged in. #
Have the oil le vel display checked at a quali/ed
specialist workshop.
Engine oil level System currently unavail. #
Close the bonnet.
Chec Chec king t
king t he engine oil lev
he engine oil lev el wit
el with t
h the on-board
he on-board
com
com put
puter (engine wit
er (engine wit h oil dips
h oil dipstictick)
k)
R R eq eq uir
uir ements:
ements:
R The vehicle is le vel during the measuring proc-
ess.
R The engine is switched o. at normal operating
te mp erature.
R Awa iting period of /ve minutes is obser ved.
R The ignition is switched on.
To check the engine oil le vel with the on-board
computer, the engine must ha vea /ll le vel sensor.
If not, the engine oil le vel can be checked only with
th e oil dipstick (/ page 226).
On-board computer: 4 Service 5
Engine oil level
The f
The f ollo
ollowing messag
wing messag es ma
es may appear on t
y appear on t he display
he display
of t
of t he on-boar
he on-boar d com
d comput
puter:
er:
Engine oil level OK #
Do not top up oil.
Engine oil level Add 1,0 l #
Addth e speci/ed quantity of oil
(/ page 227). #
Repeat the engine oil measurement aTer a few
minutes.
Engine oil level Reduce oil level
The oil le vel is too high. #
Siphon o. any excess engine oil that has been
added. Todo so, consult a quali/ed specialist
wo rkshop.
For engine oil level turn on ignition #
Switch on the ignition.
Waiting period for engine oil level not observed #
Ifth e engine is at normal operating temp era-
ture, repeat the engine oil measurement aTer
appr oximately /ve minutes. #
Ifth e engine is not at normal operating tem-
perature, repeat the engine oil measurement
aTer appr oximately 30 minutes.
Engine oil level Not with the engine running #
Switch o. the engine and, when it is at normal
operating temp erature, wait appr oximately
/ve minutes before measuring the engine oil
le ve l.
Engine oil level System inoperative
The engine oil le vel measurement is malfunction-
ing. #
Check the oil le vel using the oil dipstick
(/ page 226). #
Have the oil le vel display checked at a quali/ed
specialist workshop.
Chec Chec king t
king t he engine oil lev
he engine oil lev el wit
el with an oil dips
h an oil dips tick
tick &
W
WARNING
ARNING Risk of burns from hot compo-
nent parts in the engine compartment
Cer tain component parts in the engine com-
partment can be very hot, e.g. the engine, the
cooler and parts of theex haust system. #
Allow the engine tocool down and only
to uch component parts described in the
fo llowing. The engine oil becomes dirty during operation,
loses quality and also gradually loses volume.
Check the oil le velre gular lyand top up the oil or
ha ve itch anged if necessar y.
Re gular lych eck the 0uid le vel and the major
assemblies for leaks. If you de tect 0uid loss, for
ex ample, oil drops on theve hicle parking space,
consult a quali/ed specialist workshop as quickly
as possible. #
Only check the oil le vel when the engine is at
normal operating temp erature. 226
226
Maintenance and care

Example: engine oil /ller opening
#
Obser vethe information rega rding appro ved
engine oil under "Operating 0uids and capaci-
ties" (/ page 275). #
Unscr ewand remo vethe cap 1. #
Top up engine oil. #
Fitth e cap 1onthe /ller opening and
tighten.
When doing so, make sure that the cap
engages cor rectl y. #
If present, check the oil le vel using the oil dip-
stick (/ page 226). #
Inthe case of vehicles without an oil dipstic k,
ch eck the oil le vel with the on-board computer
aTer the next journey (/ page 225).
It is necessary torunth e engine for an extended
period aTer each oil top up tocor rectly de tect the
oil le vel.Fill le velch anges during oil top ups may
not be immediately visible. Depending on the driv-
ing pro/le, the new oil le vel can only be displa yed
aTer a driving time of up to60 minutes.
If necessar y,only top up thequ antity of oil shown
in the inst rument cluster display and check the oil
le ve l again aTer the next journe y. Chec Chec
king/t
king/t opping up t
opping up t he coolant
he coolant &
W
WARNING
ARNING Risk of /re‑ and injury from
antifreeze
If antifreeze comes into contact with hot com-
ponent parts in the engine compartment, it
may ignite. #
Allow the engine tocool down before you
to p up the antifreeze. #
Make sure that no antif reeze spills out
next tothe /ller opening. #
Thoroughly clean the antifreeze from
component parts before starting the
ve hicle. &
W WARNING
ARNING Risk of scalding from hot cool-
ant
If yo u open the cap, you could be scalded. #
Letthe mo tor cool down before opening
th e cap. #
When opening the cap, wear pr otective
glo ves and saf ety glasses. #
Open the cap slo wlytorelease pressure. Check and
top up the coolant only when theve hi-
cle is stationary and in a horizontal position and
th e engine has cooled down. The coolant temp era-
ture must be below 50°C. &
W
WARNING
ARNING Risk of burns from hot compo-
nent parts in the engine compartment
Cer tain component parts in the engine com-
partment can be very hot, e.g. the engine, the
cooler and parts of theex haust system. #
Allow the engine tocool down and only
to uch component parts described in the
fo llowing. Coolant contains gl
ycol and is therefore poison-
ous. #
Obser vethe information under "Operating 0u-
ids and capacities" (/ page 277).
* NO
NOTE
TEPaintwork damage due tocoolant If coolant
gets on painted sur faces, the paint-
wo rkcan be damaged. #
Add coolant carefull y. #
Remo vespilled coolant. Re
gular lych eck the engine cooling system and the
heating system for leaks. If there is a loss of cool-
ant, ha vethe cause de term ined and recti/ed in a
qu ali/ed specialist workshop without dela y. 228
228
Maintenance and care

Seat belts
Seat belts
R Clean wi thluk ewa rmsoapy water.
R Do not use chemical cleaning agents.
R No heating over 80°C or drying in direct sun-
light.
Ins
Instr trument clust
ument clust er lenses
er lenses
R Clean the sur faces carefully with a micro/bre
clo thand acr ylic glass care products.
R Do not use any other agents.
Displ ay
Display
R Switch o. the display and let it cool down.
R Clean the sur face carefully with a micro/bre
clo thand a suitable displ aycleaning product
(TFT-LCD).
R Do not use any other agents.
Digit
Digit al inside r
al inside r ear
earvie
vie w mirr
w mirr or
or
R Clean the mir ror glass with a clo thmoistened
with glass cleaner.
R Clean the light sensors of the inside rearview
mir ror with a dry cotton clo th.
R Do not spr aythe glass cleaner on the mir ror
glass.
R Do not use any other agents.
Plas
Plas tic tr
tic tr im
im
R Clean with a damp micro/bre clo th.
R For heavy soiling: Use a cleaning product rec-
ommended for Mercedes-Benz.
R Do not a1x stic kers, /lms or similar.
R Do not allow tocome into contact with cos-
metics, insect repellent and sun creams.
R
R oof lining
oof lining
R Clean with a brush or dry shampoo.
Car
Car pet
pet
R Use a carpet and textile cleaning agent recom-
mended for Mercedes-Benz.
Genuine leat
Genuine leat her seat cov
her seat covers
ers
R Clean with a damp clo thand then wipe with a
dry clo th.
R Leather care: Use a leather care agent recom-
mended for Mercedes-Benz.
R Do not allow the leather tobecome too damp.
R Do not use a micro/bre clo th.
Imit
Imit ation leat
ation leat her seat cov
her seat cov ers
ers
R Clean with a damp clo thand 1% soapy water.
R Do not use a micro/bre clo th.Clot
Clot
h seat cov
h seat cov ers
ers
R Clean with a damp micro/bre clo thand 1%
soap solution and allow todry.
St
St eer
eer ing wheel fr
ing wheel fr om g
om genuine leat
enuine leat her or DIN
her or DINAMICAAMICA
* NO
NOTE
TEDamage caused bywrong cleaners #
Do not use sol vent-based cleaning
agents such as tarre mo ver or wheel
cleaner; neither should you use polishes
or wa xes. Otherwise you may damage
th e /nish. R
Clean with a damp clo thand a 1% soapy water
solution and then wipe with a dry clo th.
R For heavy soiling: Use a cleaning product rec-
ommended for Mercedes-Benz.
R Leather care: Use a leather care agent recom-
mended for Mercedes-Benz.
R Do not allow the leather tobecome too damp.
R Do not use a micro/bre clo th.
% Leather is a natural product. It has natural sur-
fa ce properties, such as di.erences in st ruc-
ture, mar kscaused bygrow thand injury or
subtle colour di.erences.
R
R eal w
eal w ood and tr
ood and tr im elements
im elements
R Clean with a micro/bre clo th.
R Black piano-lac quer look: Clean with a damp
clo thand soapy water.
R For heavy soiling: Use a cleaning product rec-
ommended for Mercedes-Benz.
R Do not use any cleaning agents, polishes or
waxes containing sol vents containing sol vents. 234 234
Maintenance and ca
re