jacking MERCEDES-BENZ V-CLASS MPV 2021 Owners Manual

Due
tothe legally prescribed accuracy of the
speedome ter and odome ter displa ys,th efo llow‐
ing tyres are not permitte dfo rta xis and hire cars:
R Wheel size catego ry 1
- 195/65 R16C
R Wheel size category 2
- 225/55 R17XL
- 245/45 R18XL
If th e wheel size category changes, you must
ha ve your vehicle's contro l unitsrecoded at a
qu alified specialist workshop. Information on
the direction of the tyres'
ro tation Ty
res with a specified direction of rotation ha ve
additional benefits, e.g. if there is a risk of aqua‐
planing. You will on lyga in these benefits if the
cor rect direction of rotation is obser ved.
An ar row on the side wall of the tyre indicates its
cor rect direction of rotation.
Yo u may also fit a spa rewheel against the direc‐
tion of rotation. Obser vethe time restriction on
use as well as the speed limitation specified on
th e spare wheel. Information on
storing wheels Obser
vethefo llowing when storing wheels:
R Wheels that ha vebeen remo ved should be
st ored in a cool, dry and, if possible, dark
place.
R Protect the tyres from oil, grease and fuel. Preparing
theve hicle for a wheel change Requ
irements
R The tyre-change tool kit is available.
R The vehicle is not on a slope.
R The vehicle is on solid, non-slippery and le vel
ground. #
Appl yth e parking brake. #
Movethe front wheels tothest ra ight-ahead
position. #
Vehicles with manual transmission:
engage firs t or reve rsege ar 005E. #
Vehicles with automatic transmission:
shift the transmission toposition 005D. #
Switch off the engine. #
Make sure that the engine cann otbe star ted. #
On le velte rrain: place choc ks orother suita‐
ble objects under the front and rear of the
wheel that is diagonally opposite the wheel to
be changed. #
On slight inclines: placechoc ks orother
suitable objects under the wheels on the
front and rear axles opposite the wheel tobe
ch anged. #
If included in theve hicle equipment, take the
tyre-change tool kit out of theve hicle tool kit
(/ page 247). #
If included in theve hicle equipment, remo ve
th e spare wheel from the spare wheel brac ket
( / page 265). #
If necessar y,remo vethe wheel co ver. #
Using the wheel wrench, loosen the wheel
nuts/bolts on the wheel you wish tochange
by about one full turn. Do not unscr ewthe
wheel bolts/nuts comple tely. #
Raise theve hicle (/ page 259). Ra
ising theve hicle when changing a wheel &
WARNING Risk of injury from incorrect
positioning of the jack
If yo u do not position the jack cor rectly at the
appropriate jacking point of theve hicle, the
jack could tip wi th theve hicle raised. #
Only position the jack at the appropriate
jacking point of theve hicle. The base of
th e jack must be positioned vertically
under the jacking point of theve hicle. &
WARNING Risk of injury fromvehicle tip‐
ping
On slopes, the jack could tip with theve hicle
ra ised. Wheels and tyres
259

#
Neverch ange a wheel on a slope. #
Consult a qualified specialist workshop. *
NO
TEVehicle damage from the jack If
yo u do not position the jack cor rectly at the
appropriate jack support point of theve hicle,
th e jack could tip over with theve hicle raised. #
The jack is designed exclusively for
jacking up theve hicle at the jack sup‐
port points. Re
quirements:
R There are no persons in theve hicle.
R The vehicle is prepared forch anging a wheel
(/ page 259).
Impor tant no tes on using the jack:
R Only use theve hicle-specific jack that has
been tested and appr ovedby Mercedes-Benz
to raise theve hicle. If the jack is used incor‐
re ctl y,it could tip over while theve hicle is
ra ised.
R The jack is designed only toraise theve hicle
fo r a short time while a wheel is being
ch anged and is not suitable for car rying out
maintenance workunder theve hicle.
R Avoid changing a wheel on uphill and downhill
slopes.
R The jack must be placed on a firm ,fl at and
non-slip sur face. If necessar y,use a lar ge,
fl at, load bearing and non-slip unde rlay.
R The base of the jack is positioned vertically
under the jack support point.
Saf ety instructions while theve hicle is raised:
R Do not put your hands or feet under theve hi‐
cle.
R Do not lie underneath theve hicle.
R Do not start theve hicle and do not release
th e parking brake.
R Do not open or close any doors. Jacking points
1(rubber stoppers) are located
behind the front wheel ar ches and in front of the
re ar wheel ar ches. #
Place jack 2beneath cor responding jack
support point 1. #
Turn handwheel 3until the plate of jack 2
sits securely on jack support point 1. #
Ensure that the base of jack 2is positioned
ve rtically under jacking point 1. #
Assemble adap ter4 and ratchet 5from
th eve hicle tool kit. #
Place adap ter4 and ratchet 5onthe he xa‐
gon nut of jack 2sothat the lettering
AU F/UP is visible. #
Turn ratchet wrench 5intheAU F/UP direc‐
tion until the tyre is raised a maximum of
3 cm off the ground.
When doing so, jack 2may mo vetoone of
th e side support sur faces. Re
moving a wheel Re
quirements:
R The vehicle is raised (/ page 259).
When changing a wheel, avoid applying any force
to the brake discs since this could impair the
le ve l of com fort when braking.
* NO
TEDama getothre ading from dirt on
wheel bolts #
Do not place wheel bolts in sand or on a
dirty sur face. #
Unscr ewthe wheel bolts. #
Remo vethe wheel. 260
Wheels and tyres