dimensions Mercury Marauder 2003 Owner's Manuals

If your changer does not work, it may be that:
²A disc is already loaded where you want to insert a disc.
²The disc is inserted with the label surface downward.
²The disc is dusty or defective.
²The player's internal temperature is above 60ÉC (140ÉF). Allow the
player to cool down before operating.
²A disc with format and dimensions not within industry standards is
inserted.
CLEANING COMPACT DISCS
Inspect all discs for contamination before playing. If necessary, clean
discs only with an approved CD cleaner and wipe from the center out to
the edge. Do not use circular motion.
CD AND CD CHANGER CARE
²Handle discs by their edges only. Never touch the playing surface.
²Do not expose discs to direct sunlight or heat sources for extended
periods of time.
²Do not insert more than one disc into each slot of the CD changer
magazine.
CD units are designed to play commercially pressed 12 cm (4.75
in) audio compact discs only. Due to technical incompatibility,
certain recordable and re-recordable compact discs may not
function correctly when used in Ford CD players. Irregular
shaped CDs, CDs with a scratch protection film attached, and CDs
with homemade paper (adhesive) labels should not be inserted
into the CD player. The label may peel and cause the CD to
become jammed. It is recommended that homemade CDs be
identified with permanent felt tip marker rather than adhesive
labels. Ball point pens may damage CDs. Please contact your
dealer for further information.
CLEANING CASSETTE PLAYER (IF EQUIPPED)
Clean the tape player head with a cassette cleaning cartridge after 10 to
12 hours of play in order to maintain the best sound and operation.
CASSETTE AND CASSETTE PLAYER CARE
²Use only cassettes that are 90 minutes long or less.
²Do not expose tapes to direct sunlight, high humidity, extreme heat or
extreme cold. Allow tapes that may have been exposed to extreme
temperatures to reach a moderate temperature before playing.
Entertainment Systems
31

1Use only brake fluids certified to meet Ford specifications. DOT 3 fluid
is recommended. However, if DOT 3 is not available, DOT 4 fluid can be
used.
2Add 118 ml (4 oz.) of Additive Friction Modifier XL-2 or equivalent
meeting Ford specification EST-M2C118-A for complete refill of
Traction-Lok rear axles.
3Ensure the correct automatic transmission fluid is used. Transmission
fluid requirements are indicated on the dipstick or on the dipstick
handle. MERCONtand MERCONtV are not interchangeable. DO NOT
mix MERCONtand MERCONtV. Refer to your scheduled maintenance
guide to determine the correct service interval.
ENGINE DATA
Engine 4.6L V8 engine
Cubic inches 281
Required fuel 91 octane
Firing order 1-3-7-2-6-5-4-8
Spark plug gap 1.3-1.4 mm (0.052-0.056 inch)
Ignition system Coil on plug
Compression ratio 10.1:1
VEHICLE DIMENSIONS
Vehicle dimensions mm (in)
(1) Overall length 5 386 (212)
(2) Overall width 1 987 (78.2)
(3) Overall height 1 495 (58.9)
(4) Wheelbase 2 913 (114.7)
(5) Track - Front 1 618 (63.7)
(5) Track - Rear 1 681 (66.2)
Maintenance and Specifications
214

Safety restraints ........91, 94, 96±98
belt minder ...............................99
cleaning the safety belts ........103
extension assembly ................103
for adults .............................96±98
for children .............................111
Occupant Classification
Sensor ........................................92
warning light and
chime .......................12, 14, 98±99
Safety seats for children ..........114
Seat belts
(see Safety restraints) ...............91
Seats ............................................88
child safety seats ....................114
SecuriLock passive anti-theft
system ....................................84±86
Servicing your vehicle ..............179
Spare tire
(see Changing the Tire) ...........151
Spark plugs,
specifications .....................211, 214
Specification chart,
lubricants ...........................212, 214
Speed control ..............................63
Speedometer ...............................17
Starting your vehicle .......122±123,
125
jump starting ..........................156
Steering
speed sensitive .......................130
Steering wheel
controls ..........................50, 63, 67
tilting .........................................50T
Tachometer .................................18
Tires ...........................151, 207±209
changing ..........................151±152
checking the pressure ............209
replacing ..................................210
rotating ....................................209
snow tires and chains ............210
tire grades ...............................208
treadwear ................................208
Towing .......................................138
recreational towing .................140
trailer towing ..........................138
wrecker ....................................162
Traction control ........................128
active light ................................13
Transmission .............................131
fluid, checking and adding
(automatic) .............................204
fluid, refill capacities ..............211
lubricant
specifications ..................212, 214
Trip odometer .............................18
Trunk ...........................................76
remote release ....................73, 79
Turn signal ............................14, 42
V
Vehicle dimensions ...................214
Vehicle Identification Number
(VIN) ..........................................216
Vehicle loading ..........................136
Ventilating your vehicle ...........125
Index
226