clock Mercury Montego 2005 s User Guide
[x] Cancel search | Manufacturer: MERCURY, Model Year: 2005, Model line: Montego, Model: Mercury Montego 2005Pages: 264, PDF Size: 2.25 MB
Page 139 of 264

To help prevent the vehicle from moving when you change a tire,
be sure to place the transaxle in P (Park), set the parking brake
and block (in both directions) the wheel that is diagonally opposite
(other side and end of the vehicle) to the tire being changed.
If the vehicle slips off the jack, you or someone else could be
seriously injured.
2. Place gearshift lever in P (Park),
turn engine OFF, and block the
diagonally opposite wheel.
3. Remove wheel cover (if
equipped) with the lug wrench tip
and loosen each wheel lug nut
one-half turn counterclockwise but
do not remove them until the wheel
is raised off the ground.
2005 Montego(mgo)
Owners Guide (post-2002-fmt)
USA_English(fus)
Tires, Wheels and Loading
139
Page 140 of 264

4. Put the jack in the jack notch
next to the tire you are changing.
Turn the jack handle clockwise until
the wheel is completely off the
ground.
5. Remove the lug nuts with the lug wrench.
6. Replace the flat tire with the spare tire, making sure the valve stem is
facing outward. Reinstall the lug nuts until the wheel is snug against the
hub. Do not fully tighten the lug nuts until the wheel has been lowered.
7. Lower the wheel by turning the jack handle counterclockwise.
8. Remove the jack and fully tighten
the lug nuts in the order shown.
Refer toWheel lug nut torque
specificationslater in this chapter
for the proper lug nut torque
specification.
9. Install the wheel cover (if
equipped). The wheel cover will
only install if the Ford/Mercury logo
is aligned over the valve stem on the
wheel.
1
4 3
2 5
2005 Montego(mgo)
Owners Guide (post-2002-fmt)
USA_English(fus)
Tires, Wheels and Loading
140
Page 186 of 264

Fuse/Relay
LocationFuse Amp
RatingPassenger Compartment Fuse
Panel Description
F1 20A High beams
F2 15A Interior lamps (Courtesy and
demand lamps), Delayed
accessory (Power windows and
moonroof)
F3 25A Access/Security (Power door lock
actuators, Decklid lock actuator,
Decklid solenoid)
F4 15A Adjustable pedal switch
F5 20A Horns
F6 20A Audio (Subwoofer)
F7 7.5A Power/Keep Alive Memory
(KAM): Cluster and Powertrain
Control Module (PCM), Climate
control, Analog clock
F8 15A Park lamps, Side markers, Trailer
tow protect
F9 20A Cigar lighter, Data Link Connector
(DLC)
F10 7.5A Mirrors and memory module
F11 20A Audio, Family Entertainment
System (FES)
F12 10A Back-up lamps, Electrochromatic
mirror, Reverse Sensing System
(RSS), Trailer tow protect
F13 7.5A Audio
F14 7.5A Starter relay coil, PCM
F15 10A Delayed accessory (Driver window
motor logic, Moonroof, Audio,
Driver door lock switch
illumination)
F16 10A Rear defroster indicator, Heated
mirrors
2005 Montego(mgo)
Owners Guide (post-2002-fmt)
USA_English(fus)
Roadside Emergencies
186
Page 218 of 264

•If required, add engine oil to the
engine. Refer toAdding engine
oilin this chapter.
•Do not overfill the engine
with oil. Oil levels above this
mark may cause engine
damage.If the engine is
overfilled, some oil must be
removed from the engine by a
qualified service technician.
7. Put the indicator back in and ensure it is fully seated.
Adding engine oil
1. Check the engine oil. For instructions, refer toChecking the engine
oilin this chapter.
2. If the engine oil level is not within the normal operating range, add
only certified engine oil of the recommended viscosity. Remove the
engine oil filler cap and use a funnel to pour the engine oil into the
opening.
3. Recheck the engine oil level. Make sure the oil level is not above the
normal operating range on the engine oil level indicator (dipstick).
4. Install the indicator and ensure it is fully seated.
5. Fully install the engine oil filler cap by turning the filler cap clockwise
until it stops.
To avoid possible oil loss, DO NOT operate the vehicle with the
engine oil level indicator and/or the engine oil filler cap removed.
2005 Montego(mgo)
Owners Guide (post-2002-fmt)
USA_English(fus)
Maintenance and Specifications
218
Page 221 of 264

When lifting a plastic-cased battery, excessive pressure on the
end walls could cause acid to flow through the vent caps,
resulting in personal injury and/or damage to the vehicle or battery.
Lift the battery with a battery carrier or with your hands on opposite
corners.
Keep batteries out of reach of children. Batteries contain sulfuric
acid. Avoid contact with skin, eyes or clothing. Shield your eyes
when working near the battery to protect against possible splashing of
acid solution. In case of acid contact with skin or eyes, flush
immediately with water for a minimum of 15 minutes and get prompt
medical attention. If acid is swallowed, call a physician immediately.
Battery posts, terminals and related accessories contain lead and
lead compounds.Wash hands after handling.
Because your vehicle’s engine is electronically controlled by a computer,
some control conditions are maintained by power from the battery. When
the battery is disconnected or a new battery is installed, the engine must
relearn its idle and fuel trim strategy for optimum driveability and
performance. To begin this process:
1. With the vehicle at a complete stop, set the parking brake.
2. Put the gearshift in P (Park), turn off all accessories and start the
engine.
3. Run the engine until it reaches normal operating temperature.
4. Allow the engine to idle for at least one minute.
5. Turn the A/C on and allow the engine to idle for at least one minute.
6. Release the parking brake. With your foot on the brake pedal and with
the A/C on, put the vehicle in D (Drive) and allow the engine to idle for
at least one minute.
7. Drive the vehicle to complete the relearning process.
•The vehicle may need to be driven 10 miles (16 km) or more to
relearn the idle and fuel trim strategy.
•If you do not allow the engine to relearn its idle trim, the idle
quality of your vehicle may be adversely affected until the idle
trim is eventually relearned.
If the battery has been disconnected or a new battery has been installed,
the clock and radio settings must be reset once the battery is
reconnected.
2005 Montego(mgo)
Owners Guide (post-2002-fmt)
USA_English(fus)
Maintenance and Specifications
221
Page 225 of 264

1. Before you begin, turn the engine off and let it cool.
2. When the engine is cool, wrap a thick cloth around the coolant
pressure relief cap on the coolant reservoir (an opaque plastic bottle).
Slowly turn cap counterclockwise (left) until pressure begins to release.
3. Step back while the pressure releases.
4. When you are sure that all the pressure has been released, use the
cloth to turn it counterclockwise and remove the cap.
If coolant reservoir is empty, continue with steps 5–9, if coolant
reservoir level is only slightly low (coolant still in reservoir),
continue to Steps 5 and 6 only.
5. Fill the coolant reservoir slowly with the proper coolant mixture (see
above), to within the “COLD FILL RANGE” or the “FULL COLD” level on
the reservoir.
6. Replace the cap. Turn until tightly installed. (Cap must be tightly
installed to prevent coolant loss.)
7. Pull off metal pin and remove
coolant bleed plug from the
thermostat housing.
2005 Montego(mgo)
Owners Guide (post-2002-fmt)
USA_English(fus)
Maintenance and Specifications
225
Page 230 of 264

Refueling
Fuel vapor burns violently and a fuel fire can cause severe
injuries. To help avoid injuries to you and others:
•Read and follow all the instructions on the pump island;
•Turn off your engine when you are refueling;
•Do not smoke if you are near fuel or refueling your vehicle;
•Keep sparks, flames and smoking materials away from fuel;
•Stay outside your vehicle and do not leave the fuel pump unattended
when refueling your vehicle — this is against the law in some places;
•Keep children away from the fuel pump; never let children pump fuel
Use the following guidelines to avoid static build-up when filling an
ungrounded fuel container:
•Place approved fuel container on the ground.
•DO NOT fill a fuel container while it is in the vehicle (including the
cargo area).
•Keep the fuel pump nozzle in contact with the fuel container while
filling.
•DO NOT use a device that would hold the fuel pump handle in the fill
position.
Fuel Filler Cap
Your fuel tank filler cap has an indexed design with a 1/4 turn on/off
feature.
When fueling your vehicle:
1. Turn the engine off.
2. Carefully turn the filler cap counterclockwise 1/4 of a turn until it
stops.
3. Pull to remove the cap from the fuel filler pipe.
4. To install the cap, align the tabs on the cap with the notches on the
filler pipe.
5. Turn the filler cap clockwise 1/4 of a turn until it clicks at least once.
If the
indicator comes on and stays on after you start the engine, the
fuel filler cap may not be properly installed. Turn off the engine, remove
the fuel filler cap, align the cap properly and reinstall it.
2005 Montego(mgo)
Owners Guide (post-2002-fmt)
USA_English(fus)
Maintenance and Specifications
230
Page 254 of 264

washing ....................................207
waxing .....................................207
wheels ......................................208
wiper blades ............................209
Climate control (see Air
conditioning or Heating) ......26, 28
Clock ............................................43
Clock adjust
6-CD in dash .............................20
Compass, electronic
set zone adjustment .................59
Console ........................................68
overhead ....................................43
Controls
power seat .................................90
steering column ........................51
Coolant
checking and adding ..............222
refill capacities ................227, 242
specifications ..................245, 247
Cruise control
(see Speed control) ....................48
Cupholder(s) ...............................93
Customer Assistance ................182
Ford accessories for your
vehicle .....................................211
Ford Extended Service
Plan ..........................................204
Getting assistance outside the
U.S. and Canada .....................205
Getting roadside assistance ...182
Getting the service
you need .................................198
Ordering additional owner’s
literature .................................206
The Dispute Settlement
Board .......................................201
Utilizing the Mediation/
Arbitration Program ...............204D
Daytime running lamps
(see Lamps) ................................33
Dipstick
automatic transmission
fluid ..........................................239
engine oil .................................216
Doors
lubricant specifications ..........245
Driving under special
conditions ..........................176, 179
sand .........................................177
snow and ice ...........................180
through water .................178, 181
E
Electronic message center .........57
Emergencies, roadside
jump-starting ..........................191
Emission control system ..........236
Engine ........................................247
cleaning ...................................208
coolant .....................................222
idle speed control ...................220
lubrication
specifications ..................245, 247
refill capacities ........................242
service points ..........................215
starting after a collision .........183
Engine block heater .................165
Engine oil ..................................216
change oil soon warning,
message center .......................216
checking and adding ..............216
dipstick ....................................216
filter, specifications ........219, 241
recommendations ...................219
refill capacities ........................242
2005 Montego(mgo)
Owners Guide (post-2002-fmt)
USA_English(fus)
Index
254
Page 257 of 264

Reverse sensing system ...........173
Roadside assistance ..................182
S
Safety Belt Maintenance ..........106
Safety belts
(see Safety restraints) .94, 97–101
Safety Canopy ...........................116
Safety defects, reporting ..........206
Safety restraints ............94, 97–101
belt minder .............................102
extension assembly ................106
for adults ...........................98–100
for children .....................119–120
Occupant Classification
Sensor ........................................95
safety belt maintenance .........106
warning light and chime ........101
Safety seats for children ..........122
Seat belts
(see Safety restraints) ...............94
Seats ............................................87
child safety seats ....................122
front seats .....................87, 89, 91
heated ........................................28
memory seat .......................75, 91
Servicing your vehicle ..............213
Setting the clock
AM/FM/In-dash 6 CD ................20
Spare tire (see
Changing the Tire) ...........135, 138
Spark plugs,
specifications .....................241, 247
Specification chart,
lubricants ...........................245, 247
Speed control ..............................48Starting your
vehicle ........................162–163, 165
jump starting ..........................191
Steering wheel
controls ......................................51
tilting .........................................42
T
Tilt steering wheel ......................42
Tires ...........................130–131, 135
alignment ................................149
care ..........................................147
changing ..........................135, 138
checking the pressure ............133
inspecting and inflating .........132
label .........................................147
replacing ..................................134
rotating ....................................149
safety practices .......................148
sidewall information ...............142
snow tires and chains ............151
spare tire .................................136
terminology .............................131
tire grades ...............................131
treadwear ........................130, 147
Towing .......................................158
recreational towing .................161
trailer towing ..........................158
wrecker ....................................196
Traction control ........................167
Transaxle
fluid, refill capacities ..............242
lubricant specifications ..........247
Transmission .............................169
brake-shift interlock (BSI) ....169
fluid, checking and adding
(automatic) .............................239
lubricant specifications ..........245
Trunk ...........................................71
2005 Montego(mgo)
Owners Guide (post-2002-fmt)
USA_English(fus)
Index
257