reset Mercury Montego 2005 Quick Reference Guide

one|Tune/Disc SelectorPress to go up or down
the radio frequency or to select a desired disc.Also use in menu mode to select various settings.
two|LoadPress to begin the CD load
sequence. Press and hold to autoload up to6 CDs.
three|CDPress to enter CD mode. If a CD is
already loaded into the system, the CD willbegin playing where it last ended.
four|On/Off/Volume Control Push to turn
the system ON or OFF. Turn to increase ordecrease volume. If the volume is set above acertain level and the ignition is turned off, the
volume will come back on at a “nominal” levelwhen the ignition switch is turned back on.
five|AM / FMPress to select AM or FM
frequency bands.
six|Seek Function Press to access the
next/previous strong station or track.
seven|Scan FunctionPress for a brief
sampling of radio stations or CD tracks. Pressagain to stop.
eight|CD RewindPress to manually reverse in
a CD track.
nine|CD Fast Forward Press to manually
advance in a CD track.
ten|Setting Memory Preset To set a station:
Press AM/FM to select frequency band; tune toa station, then press and hold a preset buttonuntil the sound returns.
Bass / TreblePress MENU until bass or treble
settings are displayed, adjust using theSEEK control.
Balance / Fade Press MENU until Balance is
displayed, press to adjust the audio betweenthe left and right speakers using the SEEK
control. Press MENU again to display Fade,
press SEEK to adjust audio between the frontand rear speakers.
Setting The Clock Press MENU until SELECT
HOUR or SELECT MINS is displayed. Press the
up/down arrows or SEEK control to adjust the
hours/minutes. Press MENU again todisengage clock mode.
MP3 Track/Folder Mode In Track mode, pressing
SEEK will scroll through all tracks on the disc.
In Folder mode, pressing SEEK will scroll only
through tracks within a selected folder.
4
3
5
6
6
8
10
21
7
9
Premium / Audiophile InDash 6CD Sound System (if equipped)