key fob Mercury Mountaineer 1997 Owner's Manuals

When installing new batteries, be
sure to place the positive (+) side
down as marked. Snap the two
halves back together.
Replacing lost transmitters
If a transmitter is lost, take your
vehicle's transmitter to the dealer
to have the remote entry system
deprogrammed for the lost
transmitter. This will prevent
unauthorized use of the lost
transmitter.
You can purchase additional
transmitters (up to four can be
used) from your dealer. Use the
following instructions to
re-program the key fobs.
Re-programming your key
fob(s)
1. Insert key into ignition.
2. Rotate key to ON five times. DO
NOT START THE ENGINE. Keep
key in ON position the fifth time.
Locks will lock/unlock by
themselves.
3. Push UNLOCK on first key fob.
Doors will lock/unlock to indicate
key fob has been programmed.
4. Repeat Step 3 for each key fob
to be re-programmed.
5. Turn ignition key to OFF. Verify
each transmitter has been
programmed by activating any
button.
Controls and features
55