start stop button Mercury Mountaineer 1997 Owner's Manuals

heavy load. If vehicle speed drops
more than 15 - 25 km/h (8 - 14
mph) the speed control will cancel
automatically. Resume speed with
accelerator pedal.
If speed control cancels after
climbing the hill, reset speed by
pressing and holding the SET
ACCEL button or returning to
previous speed by pressing the
RESUME button (to resume
speeds over 50 km/h [30 mph]).
Automatic transmissions may shift
frequently while driving up on
steep grades. Eliminate frequent
shifting by shifting out of
D(Overdrive) into D (Drive).
Driving on snow and ice
An AWD vehicle has advantages
over two-wheel drive vehicles in
snow and ice but can skid like any
other vehicle.
Avoid sudden applications of
power and quick changes of
direction on snow and ice. Apply
the accelerator slowly and steadily
when starting from a full stop.
When braking, apply the brakes as
you normally would. In order to
allow the anti-lock brake system
(ABS) to operate properly, keep
steady pressure on the brake
pedal.
Allow more stopping distance and
drive slower than usual. Consider
using one of the lower gears.
If the vehicle is stuck, shift the
transmission in a steady motion
Driving
106

HAZARD SWITCH
Use the hazard flashers to warn
traffic of vehicle problems.
Press button down to activate
hazard flashers.
Press button again to deactivate
hazard flashers.
FUEL PUMP SHUTOFF SWITCH
The fuel pump shutoff switch stops
the fuel pump when the vehicle
has been involved in a collision or
major jolt. If the vehicle does not
start, it is possible that the fuel
pump shutoff switch needs to be
reset.
If you see or smell fuel, do
not reset the switch or try
to start your vehicle. Have all the
passengers get out of the vehicle
and call the local fire department
or a towing service.
0P RND21
UNLEADED
FUEL ONLY
RPM x 100012345
6H
C
F
E
RSM
SET
ACC
COAST OFF ON
SRS
- +H
H
L L020
1030405060
70
80
90
110
120000000oooo
km/h100
20406080100
120
140
160
180
Roadside emergencies
118