ad blue Mercury Mystique 1996 Owner's Manuals

70
[IP01300(ALL)05/94]
To turn your heater system on, select any position except OFF.
This will turn the fan on and allow air flow into the vehicle. To
turn your heater off, select OFF. This will turn the fan off and
stop air flow from coming into the vehicle.
[IP01325(ALL)05/94]
Your vehicle also has small demister openings on each front
door near the window. This allows a small amount of air flow
to be directed onto the door glass to reduce fogging whenever
the heater system is operating.
[IP01375(ALL)03/95]
The temperature control knob is located at the right side of the
control with a broken RED and BLUE band around the top and
sides of the knob. The all RED part of the band (full right) is
the heat or warmer area. The all BLUE area (full left) is the cool
or unheated temperature area. Any position selected between
full right and full left will give a temperature between the two
extreme temperatures. The cool temperature you select will not
be cooler than the outside temperature if your vehicle is not
equipped with an air conditioner.
*
[IP01400(ALL)03/95]
HFan speed adjustment
[IP01401(ALL)03/95]
The
H(left) knob on the control is the fan speed knob which
controls the volume of air flow. Rotate the
Hknob to HI to
increase fan speed and increase the amount of air entering the
vehicle. Four fan speed positions are available and are indicated
by LO, two single dots and HI beside the
Hcontrol knob.
*
[IP01425(ALL)03/95]
Air flow selections
[IP01451(ALL)03/95]
PANEL
[IP01475(ALL)05/94]
Use PANEL to bring outside air through the instrument panel
registers. You can heat the air in this position by rotating the
temperature control knob into the RED area. The air CANNOT
be cooled below the outside temperature regardless of the
temperature control knob setting.
File:cdipz.ex
Update:Fri Feb 23 11:07:15 1996