display Mercury Sable 1996 s Owner's Guide

184 [AS30301(ALL)04/95]Push the ªCDº button to begin CD play. If the
disc magazine has just been installed, the CD
Changer will automatically begin playing the
first track (selection) of the first disc loaded in
the unit. After that, the CD Changer will start
on the disc and track where it was stopped. The
display will indicate ªCD-##º for disc number,
then display ªTR-##º for track number, then
ªDD-TTº for disc number and track number.
[AS30325(ALL)04/95]
If the CD Changer is empty, ªNOº and ªCDº
will flash in the display and radio play will
continue.
*
[AS30350(ALL)02/95]
How to change the disc being played
[AS30401(ALL)02/95]
When in the CD mode, you can change discs by
pressing the right (
a) side of the ªTUNE/DISCº
button (to select the next disc) or the left (
b)
side of the ªTUNE/DISCº button (to select the
previous disc). Play will begin on the first track
of the selected disc.
*
[AS30450(ALL)02/95]
When either side of the button is pressed and
held, the CD changer will continue
fast-forwarding or reversing through the discs in
the disc magazine. During these functions, the
display will indicate the disc number.
*
[AS30501(ALL)02/95]
How to change the track being played
*
[AS30550(ALL)02/95]
Press the right (
a) side of the ªSEEKº button to
seek forward to the next track of current disc.
After the last track has been completed, the CD
player automatically wraps back to the first track
of the current disc.
*
[AS30601(ALL)02/95]
Press the left (
b) side of the SEEK button to
seek in reverse to the previous track on the
current disc. If a selection has been playing for
three seconds or more and you press the left
(
b) side of the SEEK button, the CD Changer
will replay that selection from the beginning.
File:fcass.ex
Update:Wed Dec 20 09:30:38 1995

185 [AS30625(ALL)04/95]
Using fast forward or reverse
[AS30651(ALL)04/95]
To quickly search for a particular point in a
selection, press and hold the ªFFº or ªREWº
button. Find the desired point by watching the
elapsed playing time in the display or listening
to the sound, then release the button.
*
[AS30800(ALL)02/95]
Operating the Shuffle feature
*
[AS30851(ALL)02/95]
The shuffle feature on your CD player allows
you to listen to your disc selections in a different
order. When this feature is activated, your CD
player will randomly select and play tracks on
the disc.
[AS30900(ALL)02/95]
Press the ªSHUFFLEº button to turn on, press it
again to turn off. When on, the display will
indicate ªSHUFº then the disc and track number
(dd-tt).
*
[AS30951(ALL)02/95]
Operating the ªSCANº function
*
[AS31000(ALL)02/95]
Press the ªSCANº button to enter the scan
mode. The CD player will begin scanning the
disc, stopping on each listenable track for
approximately an eight second sampling. This
continues until you press the ªSCANº button a
second time.
*
[AS31051(ALL)02/95]
Operating the Shuffle and Scan features
simultaneously
*
[AS31101(ALL)02/95]
Both the shuffle and scan features can be
activated simultaneously. In this mode, the
player will randomly pick a selection and play
the first eight seconds. This process is continued
until either the ªSCANº button or ªSHUFFLEº
button is pressed a second time.
*
[AS31110(ALL)04/95]
Operating the CD Compression feature
*
[AS31120(ALL)04/95]
The compression feature will bring soft and loud
passages closer together for a more consistent
listening level.
File:fcass.ex
Update:Wed Dec 20 09:30:38 1995

186 [AS31130(ALL)04/95]To turn the compression on, press the ªCOMPº
button. When the compression feature is
activated, the display will indicate ªCº. Press
again to deactivate.
*
[AS31150(ALL)02/95]
How to stop CD play
[AS31200(ALL)04/95]
While in CD Changer mode, press the ªAMº or
ªFMº button to stop CD play and resume radio
play. Loading a cassette into the cassette deck
(or pressing ªTAPEº if a cassette is already
loaded) will stop CD play and begin cassette
play.
%*
[AS32310(ALL)03/95]
How To Take Care of and Clean Your CD
Player and Discs
*
[AS32312(ALL)03/95]
To ensure the continued performance of your
Ford Compact Disc Player, carefully read the
following precautions:
*
[AS32314(ALL)03/95]
q
Always handle the disc by its edge. Never
touch the playing surface.
*
[AS32316(ALL)04/95]
q
Before playing, inspect the disc for any
contamination. If needed, clean the disc with
an approved disc cleaner, such as the
DiscwasherHCompact Disc Cleaner or the
Allsop 3HCompact Disc Cleaner, by wiping
from the center out to the edges.Do not use
a circular motion to clean.
File:fcass.ex
Update:Wed Dec 20 09:30:38 1995

189
*
[AS32344(ALL)03/95]
If play does not begin after the CD button is
pushed:
*
[AS32345(ALL)03/95]
q
The radio is not on.
[AS32346(ALL)02/95]
q
The disc magazine is not fully seated in
changer.
*
[AS32348(ALL)03/95]
q
Moisture may have condensed on the lenses
within the unit. If this occurs, remove the CD
magazine and wait approximately an hour
until the moisture evaporates.
*
[AS32350(ALL)03/95]
If the sound skips:
*
[AS32352(ALL)03/95]
q
Badly scratched discs or extremely rough
roads will cause the sound to skip. Skipping
will not damage the disc player or scratch the
discs.
*
[AS32400(ALL)02/95]
CD Error Messages
[AS32500(ALL)02/95]
Your system is equipped to diagnose certain
problems you may experience. The displayed
error codes are:
[AS32600(ALL)02/95]
NO then CDÐ Empty slot or magazine,
mechanical error, disc(s) unreadable, or
mechanism focus error. Check all discs in the
magazine for scratches and proper insertion. If
problem persists, refer problem to qualified
personnel for service.
[AS32700(ALL)02/95]
NO then DJÐ CD Changer not connected or
not communicating to audio system. Refer
problem to qualified personnel for service.
[AS32800(ALL)04/95]
TOO then HOTÐ The changer's internal
temperature is above140ÊF (60ÊC).Allow the
player to cool before operating.
File:fcass.ex
Update:Wed Dec 20 09:30:38 1995

265 %
*
[SV07300(ALL)03/95]
RWARNING
If you lose the fuel cap, replace it
with one that is an authorized
Motorcraft service part or an
equivalent part. If you do not use the
proper fuel cap, the pressure in the
fuel tank can damage the fuel system
or cause it to work improperly in a
collision, endangering you and your
passengers.
*
[SV07350(ALL)01/95]
NOTE: If you replace your fuel cap with an
aftermarket fuel filler cap, the customer
warranty may be void for any damage
to the fuel tank and/or fuel system.
*
[SV07500(ALL)03/95]
Choosing the Right Fuel
[SV07601(ALL)12/95]
Use only UNLEADED FUEL. Using leaded fuel
is prohibited by federal law. Any vehicle
damage may not be covered by your warranty.
%*
[SV08725(ALL)03/95]
Octane Recommendations
[SV08800(ALL)04/95]
Your vehicle is designed to use regular fuel
with an octane rating of 87.In most cases it is
not necessary to use a fuel with an octane rating
higher than 87. At service stations, the octane
rating is displayed in a label on the pumps.
File:fcsvs.ex
Update:Wed Dec 20 09:36:55 1995

273
%*
[SV13638(ALL)03/95]
Engine Oil Recommendations
*
[SV13639(ALL)04/95]
We recommend using Motorcraft oil or an
equivalent oil meeting Ford Specification
ESE-M2C153-E and displaying the American
Petroleum Institute CERTIFICATION MARK on
the front of the container.
*
[SV13650(ALL)03/95]
one third page art:0060021-E
The API Certification Mark
*
[SV13670(ALL)01/95]
Neveruse:
*
[SV13680(ALL)01/95]
q
ªNon-Detergentº oils
*
[SV13690(ALL)04/95]
q
Oils labeled API SA, SB, SC, SD, SE, SF or SG
%*
[SV13700(ALL)01/95]
q
Additional engine oil additives, oil treatments
or engine treatments
[SV13710(ALL)02/95]
Engine oils with an SAE 5W-30 viscosity are
PREFERREDfor your vehicle. They provide the
best engine performance, fuel economy and
engine protection for all climates down to-15ÊF
(-25ÊC).
%*
[SV13770(ALL)03/95]
Synthetic engine oils which are CERTIFIED and
of the preferred viscosity may be used in your
engine. The engine oil and oil filter must still be
changed according to the maintenance schedule.
File:fcsvs.ex
Update:Wed Dec 20 09:36:55 1995