fuse chart Mercury Sable 1996 Owner's Manuals

304
[SV32910(ALL)02/95]
Fuses and Relays
[SV32915(ALL)04/95]
Fuses (conventional and high current) and relays
protect your vehicle's wiring system from
overloading. If electrical parts in your vehicle are
not working, the system may have been
overloaded and blown a fuse. Before you replace
or repair any electrical parts, check the
appropriate circuit protector. High current fuses
should only be repaired or replaced by your
Ford or Lincoln-Mercury dealer.
[SV33400(ALL)02/95]
The following charts tell you which circuit
protector protects each electrical part of your
vehicle. If a fuse blows, all the parts of your
vehicle that use the circuit will not work.
*
[SV33410(ALL)02/95]
Once you have determined which fuses to check,
follow the procedures underChecking and
replacing fuseslater in this chapter.
*
[SV33500(ALL)05/93]
RWARNING
Always remove the key from the
ignition before working on or
replacing fuses. Failure to do so
could result in injury.
File:fcsvs.ex
Update:Wed Dec 20 09:36:55 1995

313
*
[SV36100(ALL)11/94]
4. Replace the fuse with one that has the right
amperage rating. (See the following chart.)
[SV36200(ALL)04/95]
six pica chart:0001443-A[SV36250(ALL)04/95]
fourteen pica chart:0001468-A*
[SV36300(ALL)01/95]
RWARNING
Always replace a fuse with one that
has the right amperage rating. Using
a fuse with a higher amperage rating
can cause severe wire damage and
could possibly start a fire.
[SV36400(ALL)11/94]
5. Put the cover back on.
*
[SV36600(ALL)05/93]
Even after you replace a fuse, it will continue to
blow if you do not find what caused the
overload. If the fuse continues to blow, have
your electrical system checked.
File:fcsvs.ex
Update:Wed Dec 20 09:36:55 1995