ECO mode Mercury Sable 1997 Audio Guide

completed, the CD player automatically wraps back
to the first track of the current disc.
Press
to seek in reverse to the previous track of
the current disc. If a selection has been playing for
three seconds or more and you press, the CD
changer will replay that selection from the
beginning.
Scan function
The scan function works
in radio, tape or CD
mode (if equipped).
Scan function in radio mode
Press the SCAN control to hear a brief sampling of
all listenable station on the frequency band. Press
the control again to stop the scan mode.
Scan function in tape mode
Press the SCAN control to hear a short sampling of
all selections on the tape. (The tape scans in a
forward direction. At the end of the tape's first side,
direction automatically reverses to the opposite side
of the tape.) To stop on a particular selection, press
the control again.
Scan function in CD mode
Press the SCAN control to hear a short sampling of
all selections on the current CD. (The CD scans in a
forward direction, wrapping back to the first track at
the end of the CD.) To stop on a particular
selection, press the control again.
Radio station memory preset
The radio is equipped with six station memory
preset controls. These controls can be used to select
up to six preset AM stations and twelve FM stations
(six in FM1 and six in FM2).
SCAN
dno_scan
dno_scan-radio
com_scan_function_tape.01
dno_cd
com_station_memory_preset.01
dno_setting-memory-preset
Controls and features
10

Speaker fade adjust
Speaker sound
distribution can be
adjusted between the
front and rear
speakers.
Tape play select
Press the TAPE control
to begin tape play
(with a tape loaded in
the audio system while
in radio or CD mode [if equipped]).
Pressing the control during rewinding and
fast-forwarding stops the rewind or fast-forward
function.
CD play select
Press the CD control to begin CD play (if CDs are
loaded in the CD changer). The first track of the
first disc will begin playing if the magazine has just
been installed. After that CD play will begin where it
was stopped last.
Rewind
The rewind control
(REW) works in tape
and CD modes (if
equipped).
Rewind function in tape mode
After pressing REW, the radio plays until rewind is
stopped (with the tape control) or the beginning of
the tape is reached.
Rewind function in CD mode
Pressing the REW control for less than three
seconds results in slow rewind. Pressing the REW
BASSTREB
BAL
FADE
TAPETAPE
5REWREW
com_tape_play_select.01
dno_cd-play
dno_rewind
dno_rewind-tape
com_rewind_cd.01
Controls and features
12

control more than three seconds results in fast
rewind.
Fast forward function
The fast forward control (FF) works in tape and CD
modes (if equipped).
Fast forward in tape mode
After pressing FF, the radio plays until the fast
forward function is stopped (with the tape play
select control or the fast forward control) or the end
of the tape is reached.
At the end of the first side of the tape, direction
automatically reverses and the opposite side of the
tape plays.
Fast forward function in the CD mode
Pressing FF for less than three seconds results in
slow forward action.
Pressing FF for more than three seconds results in
fast forward action.
Tape direction select
Press SIDE 1±2 to play
the alternate side of a
tape.
Tape eject
Press EJECT to stop
and eject a tape.
SIDE 1-26
SIDE 1-24
EJ
com_fast_forward.01
dno_fast-foward-in-tape
com_fast_forward_cd.01
com_tape_direction_select.01
dno_tape-eject
com_dolby_reduction.01
Controls and features
13

DolbyTnoise reduction
Dolbytnoise reduction
operates only in tape
mode. Dolbytreduces
the amount of hiss and
static during tape
playback.
Press the
button
to activate (and
deactivate) Dolbytnoise reduction.
The noise reduction system is manufactured under
license from Dolby Laboratories Licensing
Corporation.
Compression adjust (if equipped)
Compression adjust
brings soft and loud CD
passages together for a
more consistent
listening level.
Press the COMP control to activate and deactivate
compression adjust.
Shuffle feature (if equipped)
The shuffle feature
works while in CD play
mode and allows you to
listen to randomly
selected tracks on the current CD.
Press the Shuffle control to listen t the tracks on the
current CD in random order.
Random order play continues until the control is
pressed again.
Operating the Shuffle and Scan features
simultaneously
Both the Shuffle and Scan features can be activated
simultaneously. In this mode, the player will
randomly pick a selection and play the first eight
5
1SHUFFLECOMP2
1SHUFFLECOMP2
com_compression_adjust.01
dno_shuffle
Controls and features
14

CLEANING CASSETTE PLAYER
Clean the tape player head with a cassette cleaning
cartridge after ten to twelve hours of play to
maintain the best sound and operation.
CASSETTE AND CASSETTE PLAYER CARE
²Use only cassettes that are 90 minutes long or
less.
²Do not expose tapes to direct sunlight, high
humidity, extreme heat or extreme cold. Allow
tapes that may have been exposed to extreme
temperatures to reach a moderate temperature
before playing.
²Tighten very loose tapes by inserting a finger or
pencil into the hole and turning the hub.
²Remove loose labels before inserting tapes.
²Do not leave tapes in the cassette player for a
long time when not being played.
RADIO FREQUENCY INFORMATION
The Federal Communications Commission (FCC)
and the Canadian Radio and Telecommunications
Communications (CRTC) establish the frequencies
AM and FM stations may use for their broadcasts.
Allowable frequencies are:
AM 530, 540±1600, 1610 kHz steps
FM 87.9, 88.1±107.1, 107.9 Mhz steps
Not all frequencies are used in a given area.
RADIO RECEPTION FACTORS
Three factors can affect radio reception:
²Distance/strength. The further an FM station
travels, the weaker it is. The listenable range of
the average FM station is approximately 40 km
(24 miles). This range can be affected by ªsignal
com_cassette_and_player.01
com_radio_frequency_info.01
com_radio_reception_factors.01
Radio frequency information
19