PREPARING TO START YOUR VEHICLE
Climate conditions and other factors play a large part in deciding how to
start the engine. Read all the starting instructions carefully, so you'll be
aware of these factors when you start the engine.
WARNING: Before turning the key, make sure the parking brake
has been set fully. Place the gearshift in P (Park).
Do not crank the starter continuously for more than 30 seconds at a
time, as starter overheating or other damage could result. If the engine
fails or falters in starting, wait three or four seconds before re-engaging
the starter. If the engine is flooded, or fires intermittently, and fails to
start during a 30±second cranking period, wait two minutes before
attempting to start the engine again.
A computer system controls the engine's idle RPM. When you start your
vehicle, the engine's idling RPM normally runs high. These higher engine
speeds will slow down when the vehicle warms up. If they do not, have
the idle RPM checked.
WARNING: If the engine idling speed does not slow down
automatically, do not allow your vehicle to idle for more than 10
minutes. Have the vehicle checked as soon as possible. Extended
idling at high engine speeds can produce very high temperatures
in the engine, fuel systems and exhaust system, creating the risk
of fire or other damage to the vehicle and possibly resulting in
personal injury.
If fuel odor is detected inside the vehicle, have the vehicle checked by a
qualified service technician.
WARNING: Do not start your vehicle in a closed garage or other
enclosed area. Exhaust fumes can be toxic. Always open the
garage door before you start the engine.
Before you start your vehicle, do the following:
1. Make sure you and all your passengers buckle your safety belts.
2. Make sure your headlamps and other accessories are turned off.
3. Make sure the gearshift lever is in P (Park) and the parking brake is
set before you turn the key.
Starting your vehicle
4
