key Mercury Villager 1996 s Owner's Guide

Features
143
[FV05800(ALL)01/93]
The following numbers cannot be entered as a personal code:
[FV05900(ALL)01/93]
n
Any number containing digits that are all on the same
button. Example: 2-1-2-1-2
[FV06000(ALL)01/93]
n
Any number requiring sequential operation of the buttons.
Example: 1-3-5-7-0 or 7-5-3-1-9
[FV06100(ALL)04/95]
n
Any number with fewer than five digits or more than five
digits.
%*
[FV06200(ALL)02/95]
Programming your Personal Code
*
[FV06300(ALL)02/95]
To program your own code:
[FV06400(ALL)01/93]1.
Enter the permanent code.
[FV06500(ALL)04/95]2.
A buzzer will sound for about six seconds or until your
five-digit personal code is entered.
[FV06600(ALL)01/93]3.
If you have programmed a valid number within five seconds
of entering the permanent code, the buzzer will sound for
about two seconds and the keypad light will shut off.
[FV06700(ALL)04/95]4.
Test your personal code to see if it has properly registered. If
it registered, any previously entered personal code has been
erased from memory.
[FV06800(ALL)04/95]5.
If you have successfully entered your personal code, the
driver's door will unlock.
[FV06900(ALL)02/94]
If the personal code you entered did not work, it may be that
you entered an invalid personal code. SeeValid and Invalid Codes
in the previous section to select a valid personal code.
[FV07000(ALL)01/93]
NOTE: If the battery is ever disconnected, the permanent
code and your personal code will be retained in
memory.
File:08vxfvn.ex
Update:Mon Jun 3 14:49:33 1996

144
[FV07100(ALL)01/93]
Changing Your Personal Code
[FV07200(ALL)01/93]
To change your personal code, simply repeat the steps for
entering your personal code using a new series of numbers; the
previous personal code will be erased and replaced by the new
code.
%*
[FV07300(ALL)01/93]
Unlocking the Doors with the Keyless Entry System
[FV07400(ALL)01/93]
To unlock the driver's door, simply enter your personal code.
[FV07500(ALL)05/93]
To unlock the passenger's door and the sliding door, enter your
personal code and press the 3/4 button within five seconds.
[FV07600(ALL)07/93]
To unlock the liftgate, press the 5/6 button within five seconds
of unlocking the driver's door.
[FV07700(ALL)01/93]
Locking the Doors
[FV07800(ALL)05/93]
To lock all of the doors, press the 7/8 and 9/10 buttons at the
same time. To prevent you from locking your keys in your
vehicle, this feature will not operate if the key is in the ignition.
It also will not operate if the front doors, sliding door or the
liftgate are open.
[FV07900(ALL)01/93]
Illuminated Entry System (Available with Keyless Entry
System)
[FV08000(ALL)04/95]
Refer toEntry system, illuminatedin the Index for details.
[FV08010(ALL)06/95]
Remote Keyless Entry System (If equipped)
[FV08020(ALL)06/95]
Your vehicle may be equipped with a remote keyless entry
system. This option will allow you to open your vehicle using a
remote transmitter from distances of up to 49 feet (15 meters)
away. The remote feature will operate only when the ignition is
in the OFF position.
[FV08030(ALL)06/95]
The transmitter can unlock the driver's door, unlock all doors,
lock all doors, and activate the vehicle's anti-theft system (if
equipped).
File:08vxfvn.ex
Update:Mon Jun 3 14:49:33 1996

Features
145
[FV08035(ALL)06/95]
13-1/2 pica
art:0040304-A
Remote keyless entry transmitter
[FV08040(ALL)06/95]
By pressing the UNLOCK button on the transmitter once, you
can unlock the driver side door. Pressing the UNLOCK button a
second time within six (6) seconds of unlocking the driver's
door will unlock the other doors. The interior lamp will turn on
and stay on for thirty (30) seconds.
[FV08050(ALL)06/95]
By pressing the LOCK button on the transmitter once, all the
doors will lock, the parking lamps flash twice and the horn
chirps. When the LOCK button is pushed with all the doors
locked, the parking lamps flash twice and the horn chirps to
confirm that the doors are already locked.
[FV08060(ALL)06/95]
Using the Panic Alarm
[FV08070(ALL)06/95]
If you are near your vehicle and feel threatened, you may
activate the alarm to call attention to it.
[FV08080(ALL)06/95]
To activate the PANIC alarm, push and hold the PANIC button
on the remote for longer than 1.5 seconds. The horn will sound
and the headlamps and tail lights will flash for thirty (30)
seconds. To turn off the alarm, press the LOCK or UNLOCK
buttons or hold the PANIC button down for longer than 1.5
seconds.
File:08vxfvn.ex
Update:Mon Jun 3 14:49:33 1996

148
[FV08230(ALL)06/95]2.
Insert and remove key from ignition six times within ten (10)
seconds. The instrument panel lights will flash twice.
[FV08240(ALL)06/95]3.
Turn ignition key to the ACC position.
[FV08250(ALL)06/95]4.
Press the LOCK button on the remote transmitter once.
[FV08260(ALL)06/95]5.
To enter additional remote controllers (including the
original), unlock, then lock the driver's door using the power
door lock switch.
[FV08270(ALL)06/95]6.
Press the LOCK button on a new remote transmitter. The
instrument panel lights will flash twice, indicating code is
entered.
[FV08280(ALL)06/95]7.
Repeat steps 5 and 6 as needed (up to four remote
transmitters may be programmed).
[FV08290(ALL)06/95]
Anti-Theft System (If equipped)
[FV08300(ALL)06/95]
This system helps protect your vehicle against break-ins or theft
by monitoring all doors and the liftgate lock cylinder.
[FV08310(ALL)06/95]
When an unauthorized entry occurs, the system triggers and
will:
[FV08320(ALL)06/95]
n
flash the headlamps and hazard lamps
[FV08330(ALL)06/95]
n
honk the horn
[FV08340(ALL)06/95]
n
disable the starting circuit to prevent the vehicle from being
started
[FV08350(ALL)06/95]
To arm the system
[FV08360(ALL)06/95]1.
Remove the key from the ignition.
[FV08370(ALL)06/95]2.
Lock the doors by using either the power door lock switch
or by turning the key in either the driver or passenger door
lock cylinder. The parking lights will flash and the horn
chirps to let you know that the system has been armed. The
anti-theft indicator light on the right side of the steering
wheel will light and remain on.
File:08vxfvn.ex
Update:Mon Jun 3 14:49:33 1996

Features
149
[FV08375(ALL)06/95]
13-1/2 pica
art:0040329-A
Anti-theft indicator light
[FV08380(ALL)06/95]
NOTE: If your vehicle is equipped with a factory installed
keyless entry system or remote keyless entry system
(or both), the system can be armed by closing all the
doors and pressing the LOCK button on the remote
transmitter or by pressing the 7/8 and 9/10 buttons on
the keyless entry keypad.
[FV08390(ALL)06/95]3.
Close all doors. The anti-theft indicator light will stay on for
approximately 30 seconds and then flash once every 2.5
seconds.
[FV08400(ALL)06/95]
NOTE: Be sure to close all the doors completely. If the doors
are not completely closed, the alarm indicator light
will remain on steadily. The anti-theft system is
armed only when the anti-theft indicator light remains
on steadily for approximately 30 seconds after the last
door is closed, and then flashes every 2.5 seconds.
File:08vxfvn.ex
Update:Mon Jun 3 14:49:33 1996

150
[FV08410(ALL)06/95]
Disarming an untriggered anti-theft system
[FV08420(ALL)06/95]
Unlock either door with the door key or by pressing the
UNLOCK button on the remote keyless entry transmitter (if
equipped) or by entering your personal code on the keyles entry
keypad (if equipped). This will disarm the system. When you
unlock the door with the key, make sure you fully rotate the
key in the lock. If you do not, the system may not disarm, and
will trigger when a door is opened.
[FV08430(ALL)06/95]
If the system is armed and you remain in your vehicle, simply
insert the key into the ignition and turn it to ACC. This disarms
the system and allows you to open the door to exit without
triggering the system. Remember to rearm the system by using
the power door lock, the remote transmitter (if equipped), or
the keyless entry keypad (if equipped) to lock the doors.
[FV08440(ALL)06/95]
The remote keyless entry system is designed to work with the
factory installed anti-theft system. It may not work with other
anti-theft systems.
[FV08450(ALL)06/95]
Triggering the anti-theft system
[FV08460(ALL)06/95]
The armed system will be triggered if:
[FV08470(ALL)06/95]
n
any door is opened without using the door key, the keyless
entry keypad (if equipped), or the remote keyless entry
transmitter (if equipped)
[FV08480(ALL)06/95]
n
the liftgate is opened or unlocked
[FV08490(ALL)06/95]
n
the hood is opened
File:08vxfvn.ex
Update:Mon Jun 3 14:49:33 1996

Features
151
[FV08500(ALL)06/95]
Disarming a triggered anti-theft system
[FV08510(ALL)06/95]
The alarm can be disarmed by using one of the following
methods:
[FV08520(ALL)06/95]
n
unlocking the driver or passenger doors
[FV08530(ALL)06/95]
n
unlocking the doors using the keyless entry keypad (if
equipped) or with the remote keyless entry transmitter (if
equipped)
[FV08540(ALL)06/95]
n
putting the key in the ignition and turning it to the ACC
position
[FV08550(ALL)06/95]
NOTE: The flashing lights and honking horn will shut off
automatically within 2 minutes 30 seconds after the
system is triggered. It will trigger again if another
intrusion occurs. However, the starter circuit remains
disabled until the system is disarmed.
[FV08560(ALL)06/95]
NOTE: Both remote keyless entry systems will only operate
with the ignition in the OFF position.
File:08vxfvn.ex
Update:Mon Jun 3 14:49:33 1996

152
*
[FV08600(ALL)06/95]
Liftgate
[FV08610(ALL)06/95]
Opening the Liftgate
[FV08620(ALL)06/95]
To unlock the liftgate with the key, insert the key into the lock
and turn it counterclockwise. To make the gate swing up to the
fully opened position, pull back and upward on the handle. The
liftgate will not unlock if the optional liftgate window is open.
[FV08630(ALL)06/95]
17-1/2 pica art:0040121-F
Opening the liftgate
[FV08640(ALL)06/95]
You can also unlock the liftgate using the optional power door
lock system, or the optional keyless entry system. However, it
cannot be opened until you release the latch by reaching under
the license plate light shield and lifting up on the handle.
File:08vxfvn.ex
Update:Mon Jun 3 14:49:33 1996

Features
153
[FV08670(ALL)06/95]
Opening the Liftgate Window (If equipped)
[FV08700(ALL)07/95]
To open the liftgate window only, turn the key clockwise. The
window unlatches and the rear wiper falls out of the way. Do
not force the wiper down by hand Ð it moves when the key is
turned. To close, push downward until it latches.
[FV08800(ALL)09/93]
13-1/2 pica
art:0040098-A
The liftgate window in the open position
[FV08900(ALL)01/93]
RWARNING
Never drive the vehicle with the liftgate window open.
Dangerous exhaust fumes can be drawn into the vehicle
with the window raised and the vehicle moving.
[FV09000(ALL)01/93]
Closing the Liftgate
[FV09100(ALL)01/93]
To close the liftgate, reach up and pull the handle on the inner
trim panel downward.
[FV09200(ALL)01/93]
When you have pulled down the liftgate enough so that you
can reach the license plate light shield, push the shield down
and forward to close the liftgate. At this point, the liftgate is not
locked.
File:08vxfvn.ex
Update:Mon Jun 3 14:49:33 1996

Features
155
[FV09500(ALL)01/93]
You can lock the liftgate by pushing in the lock lever before
you begin to close the liftgate. You can also lock the liftgate by
closing the liftgate, inserting your key and turning it clockwise
until you hear the lock lever engage. If you turn it too far, the
optional liftgate window will open. The liftgate can also be
locked with the optional power door locks.
[FV09600(ALL)01/93]
The liftgate area is intended only for cargo, not passengers. It
cannot be opened from inside the vehicle.
[FV09700(ALL)01/93]
After the lock lever is depressed, the liftgate must be unlocked
with the power door lock button or the key.
[FV09800(ALL)01/93]
NOTE: The lock lever will be on the right side of the lock
cylinder if your vehicle is equipped with the standard
liftgate glass. The lock lever will be on the left side
of the lock cylinder if your vehicle is equipped with
the optional flip-up liftgate window.
*
[FV09900(ALL)02/95]
Windows
*
[FV10300(ALL)02/94]
Power Windows (If equipped)
[FV10400(ALL)04/95]
Each of the front doors has a power control that opens and
closes the window on that door. The driver's door has master
controls that operate both front door windows. You must place
the ignition in the ON position to use your power window
controls. The driver's power window controls include a lockout
button which prevents the operation of the passenger side
window from either the passenger or driver side controls.
[FV10500(ALL)06/95]
To open the window, press down on the switch; to close the
window, lift up on the switch.
*
[FV10600(ALL)05/95]
RWARNING
Do not let children play with the power windows. They
may seriously hurt themselves. Make sure occupants are
clear of the window(s) before closing.
File:08vxfvn.ex
Update:Mon Jun 3 14:49:33 1996