child lock Mercury Villager 1996 Owner's Manuals
[x] Cancel search | Manufacturer: MERCURY, Model Year: 1996, Model line: Villager, Model: Mercury Villager 1996Pages: 396, PDF Size: 3.67 MB
Page 4 of 396
1
Introductory Information
[IN00900(ALL)04/94]
Using This Guide
[IN01200(ALL)05/95]
To fully appreciate all of the features and options of your new
vehicle, we recommend that you thoroughly read through this
guide now and refer back to it when you have specific needs or
questions. For your own safety and the safety of your
passengers, it is important that you completely understandall
performance and care proceduresbeforeoperating this vehicle.
For example, without reading further, would you know:
[IN01300(ALL)02/95]
n
What to do if you get a flat tire? (Refer toFlat tirein the
Index)
[IN01400(ALL)02/95]
n
What it means if the O/D OFF light is illuminated on your
instrument panel? (Refer toOverdrivein the Index)
[IN01500(ALL)01/93]
n
How to engage the childproof safety lock on the sliding
door? (Refer toChildproof lockin the Index)
[IN01600(ALL)07/95]
n
That your automatic transaxle will not shift out of PARK (P)
until you depress the brake pedal? (Refer toGearshiftin the
Index)
*
[IN01605(ALL)04/95]
Ford's Commitment to You
*
[IN01610(ALL)10/95]
At Ford Motor Company, excellence is the continuous
commitment to achieve the best result possible. It is dedication
to learning what you want, determination to develop the right
concept, and execution of that concept with care, precision, and
attention to detail. In short, excellence means being the standard
by which others are judged.
*
[IN01615(ALL)04/95]
Our Guiding Principles
*
[IN01620(ALL)04/95]
n
Quality comes first.For your satisfaction, the quality of our
products and services must be our number one priority.
*
[IN01625(ALL)04/95]
n
You are the focus of everything we do.Our work must be
done with you in mind, providing better products and
services than our competition.
File:02vxinn.ex
Update:Mon Jun 3 08:15:32 1996
Page 12 of 396
10
*
[SR02050(ALL)06/95]
RWARNING
Never wear the shoulder belt under the arm. Never
swing it around the neck over the inside shoulder. Never
use a single belt for more than one person or across more
than one seating position. Each seating position in your
vehicle has a specific safety belt assembly which is made
up of one buckle and one tongue that are designed to be
used as a pair. Failure to follow these precautions could
increase the risk and/or severity of injury in a collision.
*
[SR02100(ALL)06/95]
RWARNING
Never drive or ride with a twisted or jammed safety belt.
If you cannot untwist or unjam the safety belt, see the
nearest qualified technician immediately.
*
[SR02200(ALL)06/95]
RWARNING
Children should always ride with the seatback in the
fully upright position. When the seatback is not fully
upright, there is a greater risk that the child will slide
under the safety belt and be seriously injured in a
collision.
*
[SR02300(ALL)08/95]
RWARNING
Never let a passenger hold a child on his or her lap
while the vehicle is moving. The passenger cannot
protect the child from injury in a collision.
*
[SR02700(ALL)09/95]
RWARNING
Lock the doors of your vehicle before driving to lessen
the risk of the door coming open in a collision.
File:03vxsrn.ex
Update:Wed Jun 5 12:21:10 1996
Page 18 of 396
16
%*
[SR11150(ALL)08/95]
Automatic locking mode
*
[SR11160(ALL)08/95]
In this operating mode, the shoulder belt retractor will be
automatically locked and will remain locked when the
combination lap/shoulder safety belt is buckled, and does not
allow the occupant freedom of movement. This mode provides
the following:
*
[SR11163(ALL)08/95]
n
A tight lap/shoulder belt on the occupant.
*
[SR11165(ALL)08/95]
n
Child safety seat installation.
[SR11180(ALL)05/96]
RWARNING
Rear-facing infant seats or infant carriers should never be
placed in the front seats.
*
[SR11190(ALL)09/95]
This modemust be usedwhen installing a child safety seat on
the front passenger seat and rear outboard seats where dual
locking retractors are provided.
*
[SR11200(ALL)08/95]
To switch the retractor from the emergency locking mode to the
automatic locking mode, perform the following steps:
*
[SR11210(ALL)08/95]1.
Buckle the lap/shoulder combination belt.
*
[SR11220(ALL)09/95]2.
Grasp the shoulder portion of the belt and pull downward
until all of the belt is extracted and, when allowed to retract,
a clicking sound is heard. At this time, the belt retractor is in
the automatic locking mode (child restraint mode).
*
[SR11230(ALL)08/95]3.
A clicking sound will continue to be heard as the belt is
allowed to retract. This indicates that the retractor is in the
automatic locking mode.
*
[SR11240(ALL)08/95]
NOTE: When the combination lap/shoulder belt is unbuckled
and allowed to retract completely, the retractor will
switch to the vehicle sensitive (emergency) locking
mode. See the detailed instructions underSafety Seats
for Childrenin this chapter.
File:03vxsrn.ex
Update:Wed Jun 5 12:21:10 1996
Page 35 of 396
Safety Restraints
33
*
[SR15320(ALL)08/95]
When installing a child safety seat, be sure to use the correct
safety belt buckle for that seating position, and make sure the
tongue is securely fastened in the buckle. For a shoulder/lap
belt combination with a sliding tongue, make sure the retractor
is in the automatic locking mode.
*
[SR15321(ALL)07/95]
All child restraint systems are designed to be secured in vehicle
seats by lap belts or by the lap portion of a lap-shoulder belt.
%*
[SR15325(ALL)05/95]
RWARNING
REAR-FACING INFANT SEATS SHOULD NEVER BE
USED IN THE FRONT SEAT. REAR-FACING INFANT
SEATS MUST ALWAYS BE PLACED IN THE REAR
SEAT. Failure to follow these instructions could result in
serious injury.
*
[SR15327(ALL)06/95]
RWARNING
If you do not properly secure the safety seat, the child
occupying the seat may be injured during a collision or
sudden stop. An unsecured safety seat could also injure
other passengers.
*
[SR15329(ALL)02/96]
RWARNING
Carefully follow all of the manufacturer's instructions
included with the safety seat you put in your vehicle. If
you do not install and use the safety seat properly, the
child may be injured in a sudden stop or collision.
File:03vxsrn.ex
Update:Wed Jun 5 12:21:10 1996
Page 37 of 396
Safety Restraints
35
[SR15420(ALL)06/95]
17-1/2 pica
art:0040316-A
Safety belt buckle placement for child seats
[SR18250(ALL)09/93]
Using the Automatic Locking Mode
Retractor to Secure a Child Safety Seat
*
[SR19770(ALL)06/95]
Your vehicle is equipped with a dual locking mode retractor on
the shoulder belt portion of the combination lap/shoulder safety
belt for the front passenger seat and rear outer seats. The
automatic locking modemust be usedwhen installing a child
seat or infant carrier in the front passenger seat or rear outer
seats.
*
[SR19780(ALL)09/95]
RWARNING
Never install a rear-facing child seat or infant carrier in
the right front passenger seat.
File:03vxsrn.ex
Update:Wed Jun 5 12:21:10 1996
Page 39 of 396
Safety Restraints
37
[SR19860(ALL)07/93]4.
Allow the belt to retract. A clicking sound will be heard as
the belt retracts. This indicates that the retractor is in the
automatic locking mode.
[SR19870(ALL)09/93]5.
Pull up on the shoulder belt to remove slack in the belt
while you push down on the child seat.
[SR19871(ALL)09/93]
17-1/2 pica
art:0040276-B
Removing slack from the safety belt
File:03vxsrn.ex
Update:Wed Jun 5 12:21:10 1996
Page 40 of 396
38
[SR19872(ALL)09/93]6.
Before placing the child in the child seat or infant carrier,
use force to tilt the seat from side to side, and tug it forward
to make sure that the seat is securely held in place.
[SR19873(ALL)06/94]
17-1/2 pica
art:0040277-B
Testing the security of the child seat
[SR19875(ALL)09/93]7.
Check that the retractor is in the automatic locking mode.
Try to pull more belt out of the retractor. If you cannot, the
belt is in the automatic locking mode.
[SR19878(ALL)04/95]8.
Check to make sure the child seat or infant carrier is
properly secured prior to each use. If the safety belt is not
locked, repeat steps 3 through 6.
[SR19885(ALL)09/95]
NOTE: When the lap/shoulder belt is unbuckled and allowed
to retract completely, the retractor will switch to the
vehicle sensitive (emergency) locking mode.
File:03vxsrn.ex
Update:Wed Jun 5 12:21:10 1996
Page 41 of 396
Safety Restraints
39
[SR19890(ALL)07/95]
The automatic locking mode is activated whenever all of the
belt webbing is pulled out of the retractor.
[SR19910(ALL)07/95]
While in this mode, the belt will retract or tighten but cannot be
pulled back out to obtain more length. To disengage the
automatic locking mode, unbuckle the belt and allow the
webbing to retract fully.
%*
[SR19950(ALL)06/95]
Attaching Safety Seats With Tether Straps
*
[SR19970(ALL)06/95]
Some manufacturers make safety seats that include a tether
strap that goes over the back of the vehicle seat and attaches to
an anchoring point. Other manufacturers offer the tether strap
as an accessory. Contact the manufacturer of your child safety
seat for information about ordering a tether strap.
[SR20000(ALL)01/93]
All vehicles built for sale in Canada include tether anchor
hardware for use with Canadian child safety seats. The tether
anchor hardware is located in the tire changing tool kit.
Additional tether anchor hardware can be obtained at no charge
from any Ford or Lincoln-Mercury dealer.
[SR20100(ALL)02/94]
Vehicles built for sale in the USAdo notinclude tether anchor
hardware, but it can be obtained at no charge from any Ford or
Lincoln-Mercury dealer (Part number F3XY-12613D20-A).
[SR20205(ALL)12/94]
The chart below specifies, for each seat type and position, where
the tether strap must be attached to the vehicle and the section
containing the appropriate instructions for tethering.
File:03vxsrn.ex
Update:Wed Jun 5 12:21:10 1996
Page 44 of 396
42
*
[SR20510(ALL)06/95]
RWARNING
Only use the tether attachment hole locations shown in
the illustrations. The tether anchor may not perform
properly if the wrong mounting location is used.
*
[SR20520(ALL)05/95]
RWARNING
Failure to follow these precautions could increase the
chance of injury in an accident.
*
[SR20530(ALL)05/95]
RWARNING
If the anchor bolt(s) is ever removed, the hole(s) in the
floor must be sealed to prevent the possibility of exhaust
fumes entering the passenger compartment.
[SR20760(ALL)12/94]
Tethering to lap/shoulder belt tongue
[SR20770(ALL)05/96]
To attach a tether strap to a lap/shoulder belt:
[SR20775(ALL)05/96]1.
Route the tether strap under the headrest and between the
headrest supports.
[SR20780(ALL)05/96]2.
Hook the tether strap hook into the large hole at the end of
the tongue of the lap/shoulder belt directly behind the child
seat position.
[SR20785(ALL)05/96]3.
Adjust the tether strap length until the hook is about one
foot behind the seatback.
[SR20790(ALL)05/96]4.
Pull the shoulder belt until all of the belt is fully extended
and a click is heard. At this time the belt is in automatic
locking mode (child restraint mode).
[SR20795(ALL)05/96]5.
Let the retractor wind up the slack from the lap/shoulder
belt. A clicking sound should be heard as the belt retracts,
indicating that the retractor is in the automatic locking mode.
Tighten the tether strap to remove any slack.
File:03vxsrn.ex
Update:Wed Jun 5 12:21:10 1996
Page 45 of 396
Safety Restraints
43
[SR20800(ALL)05/96]6.
Before placing a child in the child restraint, use force to tilt
the child restraint from side to side and tug it forward to
make sure it is securely held in place.
[SR20805(ALL)05/96]7.
Check that the retractor is in automatic locking mode by
trying to pull more belt out of the retractor. If you cannot
pull any more belt webbing out of the retractor, the belt is in
automatic locking mode.
[SR20810(ALL)05/96]8.
Check to make sure the child restraint is properly secured
prior to each use. If the belt is not locked, repeat steps 4
through 7.
[SR20840(ALL)12/94]
17-1/2 pica
art:0040296-AFile:03vxsrn.ex
Update:Wed Jun 5 12:21:10 1996