lock Mercury Villager 1996 Owner's Manuals

1
Introductory Information
[IN00900(ALL)04/94]
Using This Guide
[IN01200(ALL)05/95]
To fully appreciate all of the features and options of your new
vehicle, we recommend that you thoroughly read through this
guide now and refer back to it when you have specific needs or
questions. For your own safety and the safety of your
passengers, it is important that you completely understandall
performance and care proceduresbeforeoperating this vehicle.
For example, without reading further, would you know:
[IN01300(ALL)02/95]
n
What to do if you get a flat tire? (Refer toFlat tirein the
Index)
[IN01400(ALL)02/95]
n
What it means if the O/D OFF light is illuminated on your
instrument panel? (Refer toOverdrivein the Index)
[IN01500(ALL)01/93]
n
How to engage the childproof safety lock on the sliding
door? (Refer toChildproof lockin the Index)
[IN01600(ALL)07/95]
n
That your automatic transaxle will not shift out of PARK (P)
until you depress the brake pedal? (Refer toGearshiftin the
Index)
*
[IN01605(ALL)04/95]
Ford's Commitment to You
*
[IN01610(ALL)10/95]
At Ford Motor Company, excellence is the continuous
commitment to achieve the best result possible. It is dedication
to learning what you want, determination to develop the right
concept, and execution of that concept with care, precision, and
attention to detail. In short, excellence means being the standard
by which others are judged.
*
[IN01615(ALL)04/95]
Our Guiding Principles
*
[IN01620(ALL)04/95]
n
Quality comes first.For your satisfaction, the quality of our
products and services must be our number one priority.
*
[IN01625(ALL)04/95]
n
You are the focus of everything we do.Our work must be
done with you in mind, providing better products and
services than our competition.
File:02vxinn.ex
Update:Mon Jun 3 08:15:32 1996

10
*
[SR02050(ALL)06/95]
RWARNING
Never wear the shoulder belt under the arm. Never
swing it around the neck over the inside shoulder. Never
use a single belt for more than one person or across more
than one seating position. Each seating position in your
vehicle has a specific safety belt assembly which is made
up of one buckle and one tongue that are designed to be
used as a pair. Failure to follow these precautions could
increase the risk and/or severity of injury in a collision.
*
[SR02100(ALL)06/95]
RWARNING
Never drive or ride with a twisted or jammed safety belt.
If you cannot untwist or unjam the safety belt, see the
nearest qualified technician immediately.
*
[SR02200(ALL)06/95]
RWARNING
Children should always ride with the seatback in the
fully upright position. When the seatback is not fully
upright, there is a greater risk that the child will slide
under the safety belt and be seriously injured in a
collision.
*
[SR02300(ALL)08/95]
RWARNING
Never let a passenger hold a child on his or her lap
while the vehicle is moving. The passenger cannot
protect the child from injury in a collision.
*
[SR02700(ALL)09/95]
RWARNING
Lock the doors of your vehicle before driving to lessen
the risk of the door coming open in a collision.
File:03vxsrn.ex
Update:Wed Jun 5 12:21:10 1996

Safety Restraints
11
%*
[SR10000(ALL)05/95]
Combination Lap and Shoulder Belts
[SR10050(ALL)06/95]
While your vehicle is in motion, the combination lap and
shoulder belt adjusts to your movement. However, if you brake
hard, turn hard, or if your vehicle receives an impact of 5 mph
(8 km/h) or more, the lap and shoulder belt locks and helps to
reduce your forward movement.
*
[SR10200(ALL)05/95]
After you get into your vehicle, close the door and lock it. Then
adjust the seat to the position that suits you best.
[SR10400(ALL)06/95]
To fasten the belt, pull the combination lap and shoulder belt
from the retractor so that the shoulder portion of the belt
crosses your shoulder and chest. Be sure the belt is not twisted.
If it is, remove the twist. Insert the belt tongue into the proper
buckle until you hear a snap and feel it latch. Make sure the
tongue is securely fastened to the buckle by pulling on tongue.
[SR10420(ALL)06/95]
10-1/2 pica
art:0040315-A
Fastening the front seat combination lap and shoulder belt
[SR10430(ALL)09/95]
NOTE: Be sure to read and understandImportant Safety Belt
Informationat the beginning of this chapter.
File:03vxsrn.ex
Update:Wed Jun 5 12:21:10 1996

Safety Restraints
15
[SR11100(ALL)09/95]
NOTE: The second row two-passenger bench seat has a
unique safety restraint system. If your vehicle has the
two-passenger bench seat it is very important that the
unique safety belt system is used properly. Please
readAuxiliary safety restraint system for the second
row bench seatin this section, which explains the
unique safety belt system. Be sure that you
understand it before anyone rides in the
two-passenger bench seat.
[SR11115(ALL)06/95]
Passenger Outboard Lap/Shoulder Belts
[SR11117(ALL)06/95]
All seats except the driver's seat and the third seat middle
position are equipped with a dual locking mode retractor on the
shoulder belt portion of the lap/shoulder safety belt. (The
driver's seat has only a vehicle sensitive locking mode and the
third seat middle position has a lap belt without a retractor
Ðdescription follows.)
[SR11125(ALL)06/95]
Dual Locking Mode Retractors Operate in Two Ways:
*
[SR11130(ALL)08/95]
Vehicle sensitive (emergency) locking mode
*
[SR11140(ALL)06/95]
In this operating mode, the shoulder belt retractor will allow the
occupant freedom of movement, locking tight only on hard
braking, hard cornering or impacts of approximately 5 mph
(8 km/h) or more.
File:03vxsrn.ex
Update:Wed Jun 5 12:21:10 1996

16
%*
[SR11150(ALL)08/95]
Automatic locking mode
*
[SR11160(ALL)08/95]
In this operating mode, the shoulder belt retractor will be
automatically locked and will remain locked when the
combination lap/shoulder safety belt is buckled, and does not
allow the occupant freedom of movement. This mode provides
the following:
*
[SR11163(ALL)08/95]
n
A tight lap/shoulder belt on the occupant.
*
[SR11165(ALL)08/95]
n
Child safety seat installation.
[SR11180(ALL)05/96]
RWARNING
Rear-facing infant seats or infant carriers should never be
placed in the front seats.
*
[SR11190(ALL)09/95]
This modemust be usedwhen installing a child safety seat on
the front passenger seat and rear outboard seats where dual
locking retractors are provided.
*
[SR11200(ALL)08/95]
To switch the retractor from the emergency locking mode to the
automatic locking mode, perform the following steps:
*
[SR11210(ALL)08/95]1.
Buckle the lap/shoulder combination belt.
*
[SR11220(ALL)09/95]2.
Grasp the shoulder portion of the belt and pull downward
until all of the belt is extracted and, when allowed to retract,
a clicking sound is heard. At this time, the belt retractor is in
the automatic locking mode (child restraint mode).
*
[SR11230(ALL)08/95]3.
A clicking sound will continue to be heard as the belt is
allowed to retract. This indicates that the retractor is in the
automatic locking mode.
*
[SR11240(ALL)08/95]
NOTE: When the combination lap/shoulder belt is unbuckled
and allowed to retract completely, the retractor will
switch to the vehicle sensitive (emergency) locking
mode. See the detailed instructions underSafety Seats
for Childrenin this chapter.
File:03vxsrn.ex
Update:Wed Jun 5 12:21:10 1996

18
[SR11295(ALL)06/95]
Lap Belt Without a Retractor (for the three-passenger
bench seat)
[SR11300(ALL)01/93]
The center seat of the three-passenger bench seat has a lap belt
without a retractor. To make the belt longer, tip the tongue at a
right angle to the belt and pull the belt over your lap until the
tongue reaches the buckle.
*
[SR11700(ALL)06/95]
To fasten the belt, pull the belt across your hips and insert the
tongue into the correct buckle on your seat until you hear a
snap and feel it lock. Make sure the buckle is securely fastened.
*
[SR11800(ALL)05/95]
Adjust the belt so that it fits snugly and as low as possible
around the hips:
*
[SR11900(ALL)06/95]
n
If you need to lengthen the belt, unfasten it and repeat the
procedure above.
*
[SR12000(ALL)06/95]
n
If you need to shorten the belt, pull on the loose end of the
webbing.
[SR12100(ALL)01/93]
To store the belt:
[SR12200(ALL)01/93]
Fasten the center tongue and buckle when not in use. This will
prevent the belt from falling between the seat and the seatback.
[SR12205(ALL)06/95]
Auxiliary Safety Restraint System for the Second Row
Bench Seat (7 passenger vehicle)
*
[SR12210(ALL)11/93]
There is a unique safety restraint system for the outside seating
position of the second row bench seat. It is very important that
you read and understand this section before anyone rides in the
outside seating position (near the sliding door) of the
two-passenger bench seat.
[SR12215(ALL)06/95]
The two-passenger bench seat in the second row has a safety
restraint system made up of two buckles and two tongues.
There is an anchor location at the bottom of the C-pillar and
another anchor location at the top of the C-pillar that attach
each end of the seat belt webbing to the bodyside.
File:03vxsrn.ex
Update:Wed Jun 5 12:21:10 1996

Safety Restraints
33
*
[SR15320(ALL)08/95]
When installing a child safety seat, be sure to use the correct
safety belt buckle for that seating position, and make sure the
tongue is securely fastened in the buckle. For a shoulder/lap
belt combination with a sliding tongue, make sure the retractor
is in the automatic locking mode.
*
[SR15321(ALL)07/95]
All child restraint systems are designed to be secured in vehicle
seats by lap belts or by the lap portion of a lap-shoulder belt.
%*
[SR15325(ALL)05/95]
RWARNING
REAR-FACING INFANT SEATS SHOULD NEVER BE
USED IN THE FRONT SEAT. REAR-FACING INFANT
SEATS MUST ALWAYS BE PLACED IN THE REAR
SEAT. Failure to follow these instructions could result in
serious injury.
*
[SR15327(ALL)06/95]
RWARNING
If you do not properly secure the safety seat, the child
occupying the seat may be injured during a collision or
sudden stop. An unsecured safety seat could also injure
other passengers.
*
[SR15329(ALL)02/96]
RWARNING
Carefully follow all of the manufacturer's instructions
included with the safety seat you put in your vehicle. If
you do not install and use the safety seat properly, the
child may be injured in a sudden stop or collision.
File:03vxsrn.ex
Update:Wed Jun 5 12:21:10 1996

Safety Restraints
35
[SR15420(ALL)06/95]
17-1/2 pica
art:0040316-A
Safety belt buckle placement for child seats
[SR18250(ALL)09/93]
Using the Automatic Locking Mode
Retractor to Secure a Child Safety Seat
*
[SR19770(ALL)06/95]
Your vehicle is equipped with a dual locking mode retractor on
the shoulder belt portion of the combination lap/shoulder safety
belt for the front passenger seat and rear outer seats. The
automatic locking modemust be usedwhen installing a child
seat or infant carrier in the front passenger seat or rear outer
seats.
*
[SR19780(ALL)09/95]
RWARNING
Never install a rear-facing child seat or infant carrier in
the right front passenger seat.
File:03vxsrn.ex
Update:Wed Jun 5 12:21:10 1996

Safety Restraints
37
[SR19860(ALL)07/93]4.
Allow the belt to retract. A clicking sound will be heard as
the belt retracts. This indicates that the retractor is in the
automatic locking mode.
[SR19870(ALL)09/93]5.
Pull up on the shoulder belt to remove slack in the belt
while you push down on the child seat.
[SR19871(ALL)09/93]
17-1/2 pica
art:0040276-B
Removing slack from the safety belt
File:03vxsrn.ex
Update:Wed Jun 5 12:21:10 1996

38
[SR19872(ALL)09/93]6.
Before placing the child in the child seat or infant carrier,
use force to tilt the seat from side to side, and tug it forward
to make sure that the seat is securely held in place.
[SR19873(ALL)06/94]
17-1/2 pica
art:0040277-B
Testing the security of the child seat
[SR19875(ALL)09/93]7.
Check that the retractor is in the automatic locking mode.
Try to pull more belt out of the retractor. If you cannot, the
belt is in the automatic locking mode.
[SR19878(ALL)04/95]8.
Check to make sure the child seat or infant carrier is
properly secured prior to each use. If the safety belt is not
locked, repeat steps 3 through 6.
[SR19885(ALL)09/95]
NOTE: When the lap/shoulder belt is unbuckled and allowed
to retract completely, the retractor will switch to the
vehicle sensitive (emergency) locking mode.
File:03vxsrn.ex
Update:Wed Jun 5 12:21:10 1996