air conditioning Mercury Villager 1997 Owner's Manuals
[x] Cancel search | Manufacturer: MERCURY, Model Year: 1997, Model line: Villager, Model: Mercury Villager 1997Pages: 389, PDF Size: 2.31 MB
Page 60 of 389
![Mercury Villager 1997 Owners Manuals 58
[CF02000(ALL)01/96]
There are several air outlets on the instrument panel. There are
side outlets near the drivers window and passengers window,
two center outlets, floor outlets, and windshield Mercury Villager 1997 Owners Manuals 58
[CF02000(ALL)01/96]
There are several air outlets on the instrument panel. There are
side outlets near the drivers window and passengers window,
two center outlets, floor outlets, and windshield](/img/33/11174/w960_11174-59.png)
58
[CF02000(ALL)01/96]
There are several air outlets on the instrument panel. There are
side outlets near the driver's window and passenger's window,
two center outlets, floor outlets, and windshield outlets. The
direction and amount of air flow from the center and side
instrument panel outlets can be adjusted for personal comfort.
[CF02050(ALL)03/96]
NOTE: Selection of the recirculated air mode under cold and
humid conditions may result in window fogging due
to entrapped humidity within the vehicle. To
counteract this circumstance, switch to the Defrost
mode and set fan speed to 3 or 4. Adjust air
temperature to a ªwarmº instead of ªhotº setting and
deactivate the air intake selector.
[CF02100(ALL)04/96]
Heating Only System (Without air conditioning)
[CF02200(ALL)01/96]
You can heat and ventilate the inside of your vehicle, or defrost
the windshield with the function selector buttons, the fan speed
knob and the temperature control knob.
[CF02300(ALL)01/96]
An additional push-on/push-off air intake selector button
provides for the selection of recirculated inside air (button
lighted) or outside air (button not lighted).
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996
Page 63 of 389
![Mercury Villager 1997 Owners Manuals Controls and Features
61
[CF03900(ALL)01/96]
n
Do not place objects under the front seats unless your
vehicle is equipped with an underseat storage compartment.
Improperly stored objects will interfer Mercury Villager 1997 Owners Manuals Controls and Features
61
[CF03900(ALL)01/96]
n
Do not place objects under the front seats unless your
vehicle is equipped with an underseat storage compartment.
Improperly stored objects will interfer](/img/33/11174/w960_11174-62.png)
Controls and Features
61
[CF03900(ALL)01/96]
n
Do not place objects under the front seats unless your
vehicle is equipped with an underseat storage compartment.
Improperly stored objects will interfere with the flow of air
to the back seats.
*
[CF04000(ALL)01/96]
n
Remove any snow, ice, or leaves from the area below the
windshield on the outside of your vehicle. They could block
the air intake.
[CF04100(ALL)04/96]
Heating and Air Conditioning System (If equipped)
[CF04200(ALL)04/96]
Turning on the heat
[CF04300(ALL)01/96]
You can heat the inside of your vehicle and defrost the
windshield using the function selector buttons located in the
control assembly in the instrument panel.
[CF04400(ALL)03/96]
The six function selector buttons are: OFF, Mix (P), Defrost
(V), Panel (Q), Panel/Floor (S), and Floor (R). If your
vehicle is equipped with a rear seat climate control system, the
instrument panel will also include a rear seat climate control
lever. To turn on the rear passenger compartment control
system, select REAR, 1, 2, 3, or 4. With the lever set to REAR,
rear seat passengers will have control of rear fan speed on the
rear seat climate control panel. Positions 1, 2, 3, or 4 will control
rear fan speed from the front control panel. The temperature of
the air from the rear system is controlled by the rear passenger
compartment climate control system.
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996
Page 64 of 389
![Mercury Villager 1997 Owners Manuals 62
[CF04500(ALL)03/96]
13-1/2 pica
art:0040301-B
Heating and air conditioning climate control system panel
[CF04600(ALL)01/96]
The standard heating system and the heating portion of the
heating and ai Mercury Villager 1997 Owners Manuals 62
[CF04500(ALL)03/96]
13-1/2 pica
art:0040301-B
Heating and air conditioning climate control system panel
[CF04600(ALL)01/96]
The standard heating system and the heating portion of the
heating and ai](/img/33/11174/w960_11174-63.png)
62
[CF04500(ALL)03/96]
13-1/2 pica
art:0040301-B
Heating and air conditioning climate control system panel
[CF04600(ALL)01/96]
The standard heating system and the heating portion of the
heating and air conditioning system are essentially identical.
There is one exception, however; the air conditioning
compressor may automatically engage when the Defrost position
is selected to aid in defogging and defrosting the inside glass.
When Defrost is selected, the A/C compressor will
automatically operate when the outside temperature is above
approximately40ÊF (4ÊC),whether or not the A/C button is
illuminated. Manual selection and illumination of the A/C
button in defrost mode does not override the automatic
compressor operation discussed above. Refer to the heating
system operating instructions covered previously for a more
detailed explanation of heating system operation.
[CF04700(ALL)01/96]
Turning on the air conditioner
*
[CF04800(ALL)01/96]
To cool your vehicle quickly in warm weather:
[CF04900(ALL)01/96]1.
Press one of the function selector buttons (typically Panel,
but Panel/Floor, Floor or Mix can be selected).
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996
Page 65 of 389
![Mercury Villager 1997 Owners Manuals Controls and Features
63
[CF05000(ALL)01/96]2.
Turn the temperature control knob to COOL.
[CF05100(ALL)01/96]3.
Press the A/C button. The indicator light on the A/C button
will illuminate.
[CF05200(AL Mercury Villager 1997 Owners Manuals Controls and Features
63
[CF05000(ALL)01/96]2.
Turn the temperature control knob to COOL.
[CF05100(ALL)01/96]3.
Press the A/C button. The indicator light on the A/C button
will illuminate.
[CF05200(AL](/img/33/11174/w960_11174-64.png)
Controls and Features
63
[CF05000(ALL)01/96]2.
Turn the temperature control knob to COOL.
[CF05100(ALL)01/96]3.
Press the A/C button. The indicator light on the A/C button
will illuminate.
[CF05200(ALL)03/96]4.
The air intake selector button may be in the outside air
mode or the recirculated air mode. The outside air mode is
recommended for best A/C performance when the vehicle
interior is very warm. As interior air comfort is reached, you
may decide to switch to the recirculated air mode.
[CF05300(ALL)01/96]5.
Turn the fan speed knob to the position of your choice.
[CF05400(ALL)01/96]6.
If your vehicle is equipped with the rear passenger
compartment air conditioning unit, it will be on when the
front A/C is on and the rear climate control lever is set to
REAR, 1, 2, 3, or 4. Refer to the previous section for an
explanation of the heating system.
[CF05500(ALL)01/96]7.
Adjust your instrument panel registers.
[CF05600(ALL)01/96]8.
If the inside of your vehicle is very warm, you may want to
drive for a few minutes with the windows down and the air
conditioner on. This forces most of the hot, stale air out of
the vehicle and allows the air conditioner to cool down the
interior more quickly.
*
[CF05700(ALL)01/96]
The air conditioner may be used to cool the outside air being
drawn into your vehicle, but using recirculated air is more
economical and cools your vehicle more quickly.
[CF05800(ALL)01/96]
NOTE: The A/C button independently toggles the A/C
system's compressor signal and indicator light ON and
OFF in the Panel, Panel/Floor, Floor, Defrost and Mix
functions. The A/C button will not operate or light
when the system is set in the OFF position. The A/C
button will operate in defrost but will not override
previously discussed automatic operation.
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996
Page 66 of 389
![Mercury Villager 1997 Owners Manuals 64
*
[CF05900(ALL)01/96]
Cooling your vehicle with outside air
*
[CF05950(ALL)01/96]
Cooling your vehicle with air conditioned outside air is quieter
but less economical than using recirculated air. I Mercury Villager 1997 Owners Manuals 64
*
[CF05900(ALL)01/96]
Cooling your vehicle with outside air
*
[CF05950(ALL)01/96]
Cooling your vehicle with air conditioned outside air is quieter
but less economical than using recirculated air. I](/img/33/11174/w960_11174-65.png)
64
*
[CF05900(ALL)01/96]
Cooling your vehicle with outside air
*
[CF05950(ALL)01/96]
Cooling your vehicle with air conditioned outside air is quieter
but less economical than using recirculated air. It also has less
cooling capacity.
*
[CF06000(ALL)01/96]
To cool your vehicle using outside air:
[CF06100(ALL)01/96]1.
Turn the air intake selector button off (the outside air
position). The air conditioning unit directs outside air
through the instrument panel registers.
[CF06200(ALL)01/96]2.
Press one of the function selector buttons.
[CF06300(ALL)01/96]3.
Press the A/C button. The indicator light on the A/C button
will illuminate.
[CF06400(ALL)01/96]4.
Turn the temperature control knob to COOL.
[CF06500(ALL)01/96]5.
Turn the fan speed knob to the position of your choice.
[CF06600(ALL)01/96]6.
Make sure the registers in the instrument panel are open.
[CF06700(ALL)01/96]
During periods of high humidity, vapor may be emitted from
the air outlets when using the A/C with outside air. Correct
this by switching to recirculated air with the A/C button.
[CF06800(ALL)04/96]
Ventilating your vehicle with outside air
[CF06900(ALL)01/96]
In mild weather, you can ventilate your vehicle with outside air.
If the outside temperature is less than70ÊF (21ÊC), you can add
cool air to your vehicle without using air conditioning. You will
get better fuel economy this way.
[CF07000(ALL)01/96]
The procedure for ventilating your vehicle with the standard
heating system or with the air conditioning system is the same.
Refer to the previous section for instructions on how to ventilate
with outside air.
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996
Page 67 of 389
![Mercury Villager 1997 Owners Manuals Controls and Features
65
*
[CF07100(ALL)01/96]
Improving fuel economy
[CF07200(ALL)01/96]
Whenever you turn on the air conditioning, your vehicle uses
more fuel because the air conditioning compressor Mercury Villager 1997 Owners Manuals Controls and Features
65
*
[CF07100(ALL)01/96]
Improving fuel economy
[CF07200(ALL)01/96]
Whenever you turn on the air conditioning, your vehicle uses
more fuel because the air conditioning compressor](/img/33/11174/w960_11174-66.png)
Controls and Features
65
*
[CF07100(ALL)01/96]
Improving fuel economy
[CF07200(ALL)01/96]
Whenever you turn on the air conditioning, your vehicle uses
more fuel because the air conditioning compressor is running.
To get better fuel economy while cooling your vehicle, do not
use the air conditioner on mild days. Instead, set the air intake
selector button in the outside air position and turn the
temperature control knob to the COOL position.
*
[CF07300(ALL)01/96]
Operating tips
[CF07400(ALL)01/96]
When stopped in traffic for long periods of time in hot weather,
place the automatic transaxle gearshift selector lever in P (Park)
or in N (Neutral) to increase the engine idle speed. This aids in
engine cooling and air conditioner efficiency. If the engine
overheats, choose the outside air position and turn off the A/C
to stop the compressor for a short time.
*
[CF07500(ALL)01/96]
When your vehicle's engine is operated at full throttle, the air
conditioner compressor will automatically be turned off to allow
maximum engine power. This may occur during passing or
when climbing steep grades. The compressor will return to
normal operation within a few seconds after full throttle is no
longer needed.
[CF07600(ALL)01/96]
NOTE: The compressor will not operate when the outside
temperature is less than about40ÊF (4ÊC).
[CF07700(ALL)01/96]
Rear Passenger Compartment Climate Control System
for Vehicles with Non-Automatic Temperature Control
Systems (If equipped)
[CF07800(ALL)01/96]
If your vehicle is equipped with rear passenger compartment
climate controls, the rear seat occupants can select their own
personal climate comfort level.
[CF07900(ALL)01/96]
The rear seat climate control system is controlled from the main
climate control system on the instrument panel. If the main
system is off, the rear system will also be off. If the rear
passenger compartment climate control lever is set in OFF, the
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996
Page 70 of 389
![Mercury Villager 1997 Owners Manuals 68
[CF08900(ALL)01/96]
The ATC maintains the temperature you select and
automatically controls the airflow for your comfort. It also
allows you to override the automatic operation of airflow and
fan s Mercury Villager 1997 Owners Manuals 68
[CF08900(ALL)01/96]
The ATC maintains the temperature you select and
automatically controls the airflow for your comfort. It also
allows you to override the automatic operation of airflow and
fan s](/img/33/11174/w960_11174-69.png)
68
[CF08900(ALL)01/96]
The ATC maintains the temperature you select and
automatically controls the airflow for your comfort. It also
allows you to override the automatic operation of airflow and
fan speed with manual function selector buttons and the fan
speed dial.
[CF09000(ALL)01/96]
When you select the AUTOMATIC button, the system
determines airflow location and fan speed automatically. It also
automatically determines whether you will be receiving fresh
outside airflow, recirculated interior airflow, or a combination of
both. You can manually override the airflow source (outside or
recirculated air) and airflow location by selecting one of the
function selector buttons. You can also manually override the
fan speed by rotating the fan speed dial.
[CF09100(ALL)01/96]
Whether you operate in the AUTOMATIC mode or manually
override the AUTOMATIC mode settings, the ATC will continue
to maintain the air temperature you have selected. However, if
you choose to manually override the airflow location by
selecting one of the function selector buttons, you will also need
to select the A/C button if you desire cool air-conditioned air.
(Your ATC automatically operates the air conditioning [if
required] when you are in the AUTOMATIC mode without
illuminating the A/C button, but the system requires you to
manually select the A/C button if you desire A/C operation
when you manually override airflow location.)
[CF09200(ALL)01/96]
If you want continuous maximum cooling, push the
dside of
the TEMP button until60ÊF (16ÊC)shows in the display
window. The ATC will cool at its maximum level and disregard
the 60ÊF (16ÊC)setting until a warmer temperature is selected. If
you want continuous maximum heating, push the
cside of the
TEMP button until90ÊF (32ÊC)shows in the display window.
The ATC will provide maximum heat regardless of the90ÊF
(32ÊC) setting until a cooler temperature is selected.
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996
Page 71 of 389
![Mercury Villager 1997 Owners Manuals Controls and Features
69
[CF09300(ALL)01/96]
The display window and the function selector buttons indicate
how the system is operating. The display window shows the
selected temperature and displays A Mercury Villager 1997 Owners Manuals Controls and Features
69
[CF09300(ALL)01/96]
The display window and the function selector buttons indicate
how the system is operating. The display window shows the
selected temperature and displays A](/img/33/11174/w960_11174-70.png)
Controls and Features
69
[CF09300(ALL)01/96]
The display window and the function selector buttons indicate
how the system is operating. The display window shows the
selected temperature and displays AUTO if you are operating in
the AUTOMATIC mode. If you override the automatic mode by
selecting any of the function selector buttons, AUTO no longer
appears in the display window and the appropriate function
selector button(s) illuminate. The display window also indicates
manual (thumbwheel) control of the fan speed when a
His
shown.
[CF09400(ALL)01/96]
Automatic Operation
[CF09450(ALL)01/96]
Push the AUTOMATIC button and select the desired
temperature. The selected temperature and AUTO appear in the
display window. The ATC heats or cools to achieve the set
temperature. It is important to note that if the ATC engages
your vehicle's air-conditioning, it will do so automatically
without illuminating the A/C button.
[CF09500(ALL)05/96]
When in AUTOMATIC and weather conditions require heat, air
is sent to the floor. However, a feature is included in the ATC
to prevent blowing cold air to the floor if the engine coolant is
not warm enough to provide heating. Within three or four
minutes (of determining the engine coolant is warm enough),
the fan speed gradually increases and airflow changes to the
floor.
[CF09600(ALL)05/96]
If specific conditions exist (such as window fogging), the five
override buttons allow specific airflow selection. The
thumbwheel allows you to adjust the fan speed to suit your
needs.
[CF09700(ALL)01/96]
Temperature Selection
[CF09800(ALL)01/96]
The
dTEMP
cbutton on the left side of the control panel is
for temperature selection. The
dside lowers the set
temperature, and the
cside raises the set temperature. Press
and hold either side of the button to rapidly change the
temperature setting in one degree increments to either65ÊF
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996
Page 73 of 389
![Mercury Villager 1997 Owners Manuals Controls and Features
71
[CF10200(ALL)01/96]
P
[CF10300(ALL)05/96]
Push this button for airflow to the floor and windshield at the
same time. ThePindicator light illuminates, and the display
window sh Mercury Villager 1997 Owners Manuals Controls and Features
71
[CF10200(ALL)01/96]
P
[CF10300(ALL)05/96]
Push this button for airflow to the floor and windshield at the
same time. ThePindicator light illuminates, and the display
window sh](/img/33/11174/w960_11174-72.png)
Controls and Features
71
[CF10200(ALL)01/96]
P
[CF10300(ALL)05/96]
Push this button for airflow to the floor and windshield at the
same time. ThePindicator light illuminates, and the display
window shows the set temperature. However, the air is not
cooled below the temperature outside of the vehicle regardless
of the temperature setting unless the A/C button is pushed.
[CF10400(ALL)01/96]
V
[CF10500(ALL)01/96]
Press this button to obtain maximum airflow to the windshield.
Adjust the temperature setting as required for defrosting. The
Vindicator light illuminates and the display window shows
the set temperature. When the outside temperature is about50ÊF
(10ÊC) the air conditioning functions in order to dehumidify the
air to prevent window fogging.
[CF10600(ALL)01/96]
Q
[CF10700(ALL)05/96]
Push this button to select airflow through the instrument panel
registers. TheQindicator light illuminates and the display
window shows the set temperature. The ATC heats the air if the
selected temperature is warmer than the outside air coming into
the vehicle. However, the air is not cooled below the
temperature outside of the vehicle regardless of the temperature
setting unless the A/C button is pushed.
[CF10800(ALL)01/96]
S
[CF10900(ALL)05/96]
Push this button for air from the floor and instrument panel
registers at the same time. TheSindicator light illuminates
and the display window shows the set temperature. The ATC
heats the air if the selected temperature is warmer than the
outside air coming into the vehicle. However, the air is not
cooled below the temperature outside of the vehicle regardless
of the temperature setting unless the A/C button is pushed.
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996
Page 74 of 389
![Mercury Villager 1997 Owners Manuals 72
[CF11000(ALL)01/96]
R
[CF11100(ALL)05/96]
Push this button to direct airflow to the floor. TheRindicator
light illuminates and the display window shows the set
temperature. The ATC heats the air if Mercury Villager 1997 Owners Manuals 72
[CF11000(ALL)01/96]
R
[CF11100(ALL)05/96]
Push this button to direct airflow to the floor. TheRindicator
light illuminates and the display window shows the set
temperature. The ATC heats the air if](/img/33/11174/w960_11174-73.png)
72
[CF11000(ALL)01/96]
R
[CF11100(ALL)05/96]
Push this button to direct airflow to the floor. TheRindicator
light illuminates and the display window shows the set
temperature. The ATC heats the air if the selected temperature
is warmer than the outside air coming into the vehicle.
However, the air is not cooled below the temperature outside of
the vehicle regardless of the temperature setting unless the A/C
button is pushed.
[CF11200(ALL)01/96]
Air Conditioning and Air Recirculation
[CF11300(ALL)01/96]
Activate the air conditioning in any of the function selector
override modes by pressing the A/C button. The A/C indicator
light on the button illuminates to verify activation, and cooled
air flows from the vents. Fan speed continues to be controlled
by the ATC unless the fan speed thumbwheel is used to
override the ATC.
[CF11400(ALL)01/96]
Press theMbutton to choose air recirculation. In this mode
the ATC system recirculates the air inside the vehicle rather
than drawing air from outside. Use this mode together with the
air conditioning to rapidly cool the inside of the vehicle or to
dehumidify the air inside the vehicle.
[CF11500(ALL)01/96]
Rear Passenger Compartment Climate Control System
with Front Passenger ATC
[CF11600(ALL)01/96]
If your vehicle is equipped with ATC, the rear passenger
compartment will also have climate controls so that rear seat
occupants can select their own personal climate comfort level.
[CF11700(ALL)01/96]
The rear seat climate control system is controlled from the main
ATC system on the instrument panel. If the front ATC system is
off, the rear system will also be off. Also, if the rear seat climate
control lever is set in OFF, the rear climate controls are turned
off.
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996