clock Mercury Villager 1997 Owner's Manuals

40
*
[AS13300(ALL)08/95]
n
If a tape is loose inside the cassette, tighten it before playing
by putting your finger or a pencil into one of the holes and
turning the hub until the tape is tight.
[AS13400(ALL)05/96]
n
Using a Ford Cassette Cleaning Cartridge or equivalent to
clean the tape player head after 10-12 hours of play will help
maintain the best playback sound and proper tape operation.
%*
[AS29753(ALL)01/96]
Clock Operation
[AS29756(ALL)07/94]
How to View the Clock Mode
[AS29759(ALL)05/96]
Press the ªCLKº button to alternate the frequency/ tape/CD (if
equipped) and time in the display. In the clock mode, pressing
any radio/tape/CD (if equipped) function will automatically
display the radio frequency/tape/CD (if equipped) for
approximately ten seconds before changing back to the clock
mode.
[AS29762(ALL)07/94]
How to Set the Clock
[AS29765(ALL)06/95]1.
Turn the ignition on (clock can be set when radio is on or
off).
[AS29768(ALL)06/95]2.
Press and hold in the ªCLKº button, press the ªSEEKº
button left (
b) to advance the hours and right (
a)to
advance the minutes.
[AS29771(ALL)09/95]
NOTE: The clock displays 12-hour time with no A.M./P.M.
indications.
File:04vxasn.ex
Update:Thu May 30 09:46:22 1996

56
[CF00600(ALL)01/96]
The controls for the climate control systems, headlamps, clock,
radio, rear window washer and wiper, hazard flasher, power
switch, and speed control are all on the instrument panel.
%*
[CF00700(ALL)01/96]
Climate Control Systems
[CF00800(ALL)03/96]
13-1/2 pica
art:0040301-B
Climate control system panel
[CF00900(ALL)01/96]
Function Selector Buttons
[CF00950(ALL)03/96]
There are six function selector buttons: OFF, Mix, Defrost, Panel,
Panel/Floor, and Floor. When you press a function selector
button, the indicator light on the button will illuminate. If your
vehicle is equipped with a rear passenger compartment climate
control system, the instrument panel will also include a rear seat
function selector.
[CF01000(ALL)01/96]
n
The OFF button shuts off the air supply to all outlets and
stops all fan operations. Use this setting when driving
through an area where outside air is unpleasant or dusty.
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996

84
[CF18300(ALL)01/96]
You can turn the map lamps on and off by pressing the
switches next to the lamps.
*
[CF18400(ALL)01/96]
Radio
[CF18500(ALL)01/96]
For information about the radio in your vehicle, refer to the
Electronic Sound Systemschapter in this owner guide.
[CF18600(ALL)01/96]
Clock Controls on Electronic Radios
[CF18700(ALL)01/96]
The electronic radios have a built-in clock. For complete
operating instructions, refer to theElectronic Sound Systems
chapter in this owner guide.
%*
[CF18800(ALL)03/96]
Radio Antenna
*
[CF18900(ALL)01/96]
The fixed radio antenna is mounted on the front fender on the
passenger's side of the vehicle.
[CF19000(ALL)04/96]
Power Antenna (If equipped)
[CF19100(ALL)01/96]
The power antenna is located on the front fender on the
passenger's side of the vehicle. It will automatically raise when
the radio is turned on and lower when the radio is turned off.
[CF19200(ALL)04/96]
NOTE: The radio must be turned off so that the antenna will
retract prior to entering a car wash. Failure to retract
the antenna could result in damage to the antenna,
antenna base, or vehicle.
*
[CF19300(ALL)05/96]
The controls on the steering column and wheel are designed to
give you easy access to the controls while you are driving.
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996

Controls and Features
103
%*
[CF31200(ALL)01/96]
Liftgate
[CF31300(ALL)01/96]
Opening the Liftgate
[CF31400(ALL)01/96]
To unlock the liftgate with the key, insert the key into the lock
and turn it counterclockwise. To make the gate swing up to the
fully opened position, pull back and upward on the handle. The
liftgate will not unlock if the optional liftgate window is open.
[CF31500(ALL)01/96]
17-1/2 pica art:0040121-F
Opening the liftgate
[CF31600(ALL)01/96]
You can also unlock the liftgate using the optional power door
lock system, or the optional keyless entry system. However, it
cannot be opened until you release the latch by reaching under
the license plate light shield and lifting up on the handle.
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996

104
[CF31700(ALL)01/96]
Opening the Liftgate Window (If equipped)
[CF31800(ALL)01/96]
To open the liftgate window only, turn the key clockwise. The
window unlatches and the rear wiper falls out of the way. Do
not force the wiper down by hand Ð it moves when the key is
turned. To close, push downward until it latches.
[CF31900(ALL)01/96]
13-1/2 pica
art:0040098-A
The liftgate window in the open position
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996

106
[CF32500(ALL)01/96]
24 pica art:0040099-D
Locking the liftgate using the lock lever
[CF32600(ALL)01/96]
You can lock the liftgate by pushing in the lock lever before
you begin to close the liftgate. You can also lock the liftgate by
closing the liftgate, inserting your key and turning it clockwise
until you hear the lock lever engage. If you turn it too far, the
optional liftgate window will open. The liftgate can also be
locked with the optional power door locks.
[CF32700(ALL)01/96]
The liftgate area is intended only for cargo, not passengers. It
cannot be opened from inside the vehicle.
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996

228
*
[GF10750(ALL)01/96]
N (Neutral)
*
[GF10760(ALL)09/95]
In N (Neutral), the wheels of the transaxle are not locked. Your
vehicle will roll freely, even on the slightest incline, unless the
parking brake or brakes are on.
*
[GF10800(ALL)01/96]
Parking
*
[GF10850(ALL)01/96]
Always come to a complete stop before you shift into P (Park).
This position locks the transaxle and prevents the front wheels
from turning. To securely latch the gearshift in the P (Park)
position, pull it toward you, push it completely
counterclockwise against the stop, and then push it toward the
instrument panel.
[GF10870(ALL)01/96]
The gearshift is securely latched in Park (P) if you cannot rotate
it in a clockwise direction without lifting it toward you.
*
[GF10900(ALL)05/96]
RWARNING
Always set the parking brake fully and make sure the
gearshift is latched in P (Park). Turn off the ignition
whenever you leave your vehicle.
*
[GF11000(ALL)05/96]
RWARNING
Never leave your vehicle unattended while it is running.
*
[GF11100(ALL)05/96]
Forced Downshifts
[GF11110(ALL)01/96]
To gain extra acceleration in Drive (D) (when passing another
vehicle) push the accelerator to the floor. The transaxle will
automatically downshift to the appropriate gear - third, second
or first.
File:09vxgfn.ex
Update:Thu May 30 09:54:10 1996

258
*
[ER00590(ALL)05/96]2.
Find the lug wrench in the tool kit located behind the jack in
the right cargo area side panel.
*
[ER00595(ALL)01/96]3.
Fit the hex-shaped end of the lug wrench over the hex nut
in the floor of the cargo area. Turn counterclockwise until
the cable extends far enough to lower the spare tire to the
ground.
*
[ER00600(ALL)01/96]
10-1/2 pica
art:0040172-B
The spare tire in the lowered position
*
[ER00605(ALL)01/96]4.
Continue to turn the hex nut counterclockwise until the
spare tire retainer can be seen for removal.
*
[ER00610(ALL)01/96]5.
Remove the retainer from the center of the wheel. It may be
necessary to lift one end of the tire to disengage the retainer.
File:10vxern.ex
Update:Thu May 30 09:55:50 1996

Roadside Emergencies
259
*
[ER00615(ALL)01/96]
10-1/2 pica
art:0040173-B
Removing the spare tire retainer
*
[ER00620(ALL)01/96]
Stowing the spare tire
[ER00625(ALL)05/96]1.
To raise the tire to the stowed position, lay the tire on the
ground with the inboard side facing up. Install the retainer
through the wheel center and slide the tire under the vehicle.
Fit the hex-shaped end of the lug wrench over the hex nut
in the floor of the cargo area. Turn the lug wrench clockwise
until the tire is raised to its original position underneath the
vehicle.
[ER00630(ALL)01/96]
NOTE: The lug wrench ratchets when the tire is raised to the
stowed position. It will not allow you to over-tighten.
*
[ER00635(ALL)01/96]2.
Check for proper seating against the underbody supports
and retighten if necessary.
*
[ER00640(ALL)01/96]
RWARNING
Make sure the spare tire and jacking equipment are
stowed and secured in the proper storage location.
File:10vxern.ex
Update:Thu May 30 09:55:50 1996

Roadside Emergencies
263
[ER00700(ALL)05/96]
If you have optional cast-aluminum wheels, remove the wheel
cap to gain access to the lug nuts. Insert the tapered end of the
jack handle behind the notch in the wheel cap and gently pry it
off. To replace it, press it back on. You must line up the raised
circle on the back of the wheel cap with the indented area on
the wheel in order to press the wheel cap on.
[ER00705(ALL)01/96]
13-1/2 pica
art:0040181-B
Removing the optional wheel cap
*
[ER00710(ALL)01/96]4.
Fit the hex-shaped end of the lug wrench over the wheel lug
nuts and loosen them one-half turn (counterclockwise). Do
not remove the wheel lug nuts until you raise the tire off the
ground.
%*
[ER00715(ALL)01/96]
If your vehicle has the optional locking lug nuts, you must
use the lug nut removal tool provided with your vehicle's
tool kit.
File:10vxern.ex
Update:Thu May 30 09:55:50 1996