lights Mercury Villager 1997 Owner's Manuals

7
Instrumentation
[IS00300(ALL)01/96]
Warning Lights and Gauges
[IS00350(ALL)01/96]
The instrument panel (dashboard) on your vehicle is divided
into several different sections. The illustrations on the following
pages show the major parts of the instrument panel described in
this chapter. Some items shown may not be on all vehicles.
[IS00440(ALL)01/96]
In your vehicle, the warning lights and gauges are grouped
together on the instrument panel. We call this grouping a
cluster. Your vehicle may have a mechanical cluster or an
electronic cluster.
*
[IS00450(ALL)01/96]
If you are not sure which cluster your vehicle has, check the
diagrams on the following pages.
File:03vxisn.ex
Update:Thu May 30 09:45:36 1996

Instrumentation
9
[IS00800(ALL)01/96]
The following warning lights and gauges are on the mechanical
cluster. All of the warning lights and gauges alert you to
possible problems with your vehicle. Some of the lights listed
are optional. The following section explains what each of these
indicators means.
%*
[IS00850(ALL)04/96]
Indicator Lights and Chimes
%*
[IS00900(ALL)01/96]
Brake System Warning Light
*
[IS01000(ALL)03/96]
The warning light for the brakes can show two things Ð that
the parking brake is not fully released, or that the brake fluid
level is low in the master cylinder reservoir. If the fluid level is
low, the brake system should be checked by your dealer or a
qualified service technician.
[IS01100(ALL)01/96]
6 pica art:0040050-A
Brake system and parking brake light
[IS01200(ALL)03/96]
The BRAKE light normally illuminates when you turn the
ignition key to the ON position to verify that the indicator bulb
is working. If the light stays on or comes on when the engine is
running and after you have released the parking brake fully,
have the hydraulic brake system serviced.
*
[IS01300(ALL)03/96]
RWARNING
The BRAKE light indicates that the brakes may not be
working properly. Have the brakes checked immediately.
File:03vxisn.ex
Update:Thu May 30 09:45:36 1996

Instrumentation
17
%*
[IS06100(ALL)12/95]
Low Washer Fluid Light
[IS06200(ALL)01/96]
The low washer fluid light will remain illuminated when the
washer fluid sensor indicates that the washer fluid level is low.
[IS06300(ALL)01/96]
6 pica art:0040059-A
Low washer fluid light
%*
[IS06400(ALL)05/96]
High Beam Light
*
[IS06500(ALL)03/96]
This light illuminates when the headlamps are turned to high
beam or when you flash the lights.
[IS06600(ALL)01/96]
6 pica art:0040065-A
High beam light
%*
[IS06700(ALL)03/96]
ªHeadlamps Onº Alert Chime
[IS06800(ALL)01/96]
This chime will sound if you open the door while the
headlamps or parking lamps are on.
%*
[IS06820(ALL)01/96]
Ignition Key Chime
[IS06830(ALL)01/96]
The chime will sound if you open the driver's door while the
key is in the ignition. Never leave your vehicle unattended with
the key in the ignition.
File:03vxisn.ex
Update:Thu May 30 09:45:36 1996

Instrumentation
23
[IS09600(ALL)01/96]
The electronic cluster has all of the same warning lights as the
mechanical cluster, however, some of the gauges will be
electronic instead of analog. In addition, the electronic cluster
has a fuel computer for measuring fuel economy, distance to
empty and outside air temperature.
%*
[IS09700(ALL)03/96]
Engine Coolant Temperature Gauge
[IS09800(ALL)01/96]
This gauge shows you the temperature of the engine coolant
and is identified by a thermometer symbol. The letter H means
that the coolant is hot, C means that it is cold, and NORMAL
means that the coolant is within the normal operating range.
[IS09900(ALL)01/96]
The indicator bar on the graph will move into the normal
operating range as the engine warms up. When you are in
heavy traffic or stop-and-go driving in hot weather, the gauge
may read at the very top of the NORMAL range. This is
acceptable.
[IS10000(ALL)01/96]
However, if the indicator bar on the graph moves into the H
(hot) position, the engine is overheating and may cause engine
damage. If this happens, you should stop your vehicle as soon
as safely possible. Turn off the engine and let it cool. Check the
coolant level to be sure that it is at the proper level. If your
vehicle needs more coolant, seeEngine coolant, checking and
addingin the Index and read the section regarding adding
coolant.
File:03vxisn.ex
Update:Thu May 30 09:45:36 1996

50
[AS35600(ALL)05/96]
Terrain
[AS35700(ALL)05/94]
The terrain (hills, mountains, tall buildings) of the area over
which the signal travels may prevent the FM signal from being
noise-free.
*
[AS35900(ALL)08/95]
If there is a building or large structure between the antenna and
station, some of the signal ªbendsº around the building, but
certain spots receive almost no signal. Moving out of the
ªshadowº of the structure will allow the station to return to
normal.
[AS36000(ALL)05/95]
This condition exists when the radio waves are reflected off
objects or structures; the reflected signal cancels the normal
signal, causing the antenna to pick up noise and distortion.
Cancellation effects are most prominent in metropolitan areas,
but also can becomes quite severe in hilly terrain and depressed
roadways.
[AS36100(ALL)03/93]
To minimize the effects of these conditions, a stereo/mono
blend circuit has been incorporated into this system. This feature
automatically switches a weak stereo signal to a clearer
monaural signal, which improves the quality of reception.
*
[AS36200(ALL)08/95]
Several sources of static are normal conditions on AM
frequencies. These can be caused by power lines, electric fences,
traffic lights and thunderstorms.
*
[AS36300(ALL)08/95]
Another reception phenomenon isStrong Signal Capture and
Overload. This can occur when listening to a weak station and
when passing another broadcast tower. The close station may
capture the more distant station, although the displayed
frequency does not change. While passing the tower, the station
may switch back and forth a few times before returning to the
original station.
File:04vxasn.ex
Update:Thu May 30 09:46:22 1996

76
[CF13500(ALL)01/96]
To activate the rear washer, press the RR WASH switch. For a
constant spray, hold the switch for a few seconds. For less
washer fluid, press the switch once and release it. When you
activate the washer, the wiper will cycle twice and then stop.
*
[CF13600(ALL)01/96]
Do not activate the washer for longer than fifteen seconds
continuously. This could damage the washer pump system.
%*
[CF13650(ALL)01/96]
Hazard Flasher Switch
[CF13655(ALL)03/96]
The hazard flasher switch is located on the instrument panel to
the right of the steering column. For more information, refer to
theRoadside Emergencieschapter.
[CF13700(ALL)01/96]
Interior and Exterior Lights
*
[CF13800(ALL)05/96]
To turn on the headlamps, parking lamps, marker lamps, tail
lamps, license plate lamps and instrument panel lamps, use the
headlamp knob, to the left of the instrument cluster.
*
[CF13900(ALL)05/96]1.
Turn the headlamp knob to the first position to turn on the
parking lamps, tail lamps, license plate lamps, marker lamps
and instrument panel lamps.
*
[CF13950(ALL)05/96]2.
Turn the headlamp knob to the second position to turn on
the headlamps in addition to the parking lamps, tail lamps,
license plate lamps, marker lamps and instrument panel
lamps.
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996

Controls and Features
77
[CF14000(ALL)01/96]
13-1/2 pica art:0040074-E
The headlamp control knob
[CF14100(ALL)01/96]
A chime will sound if any of the exterior lamps are on when
the driver's door is opened.
%*
[CF14400(ALL)01/96]
Daytime Running Light (DRL) System
(Canadian vehicles only)
*
[CF14500(ALL)03/96]
The Daytime Running Light (DRL) system turns the high beam
headlamps on, with a reduced light output, when:
*
[CF14600(ALL)01/96]
n
the vehicle is ªrunningº
*
[CF14700(ALL)02/96]
n
the vehicle has a fully released parking brake
*
[CF14800(ALL)01/96]
n
the headlamp system is in the OFF position
*
[CF14900(ALL)01/96]
NOTE: You may notice that the lights flicker when the engine
is turned on or off. This is a normal condition.
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996

78
*
[CF15000(ALL)03/96]
RWARNING
The Daytime Running Light (DRL) system will not
illuminate the tail lamps and parking lamps. Turn on
your headlamps at dusk. Failure to do so may result in a
collision.
%*
[CF15100(ALL)01/96]
Lighting Up the Instrument Panel
[CF15200(ALL)01/96]
The instrument panel lights can be turned on by turning the
headlamp control knob to either the first or second position.
You can brighten or dim the instrument panel lights with the
DIM switch. The DIM switch is located near the headlamp
controls.
[CF15300(ALL)01/96]
Pushing and holding the right side of the switch will continue
to brighten the lights until the maximum brightness is reached.
Release the switch to maintain the desired brightness. The DIM
feature works similarly to dim the instrument panel lights when
the left side of the switch is pushed.
[CF15400(ALL)01/96]
7-1/2 pica art:0040076-B
The instrument panel brightness control
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996

86
*
[CF19400(ALL)01/96]
Ignition
%*
[CF19500(ALL)01/96]
Understanding the Positions of the Ignition
[CF19600(ALL)01/96]
Your vehicle's ignition has four positions. They are:
*
[CF19700(ALL)01/96]
13-1/2 pica
art:0040047-D
The ignition positions
[CF19750(ALL)05/96]
OFF/LOCK allows you to shut off the engine and all accessories
and locks the gearshift lever. Removing the key then locks the
steering wheel.
[CF19775(ALL)05/96]
ACCESSORY allows you to operate some of your vehicle's
electrical accessories while the engine is not running. For
example, you can use ACCESSORY to turn on the radio,
windshield wipers, or operate the cigarette lighter without
starting the engine.
*
[CF19800(ALL)01/96]
ON allows you to test your vehicle's warning lights to make
sure they work before you start the engine. The key returns to
the ON position once the engine is started and remains in this
position while the engine runs.
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996

88
*
[CF21000(ALL)01/96]
If the turn indicator light in the instrument panel does not
illuminate or remains on (does not flash) when you signal a
turn, the turn signaling system is malfunctioning. Have this
condition corrected as soon as possible, and use the accepted
hand signals until the turn signal system is repaired.
[CF21100(ALL)01/96]
Cornering Lights
[CF21200(ALL)01/96]
Your vehicle is equipped with special cornering lights designed
to provide additional illumination toward the direction you are
turning. The corresponding light comes on when a turn is
signaled.
*
[CF21300(ALL)08/95]
High Beams and Flashing the Lamps
*
[CF21400(ALL)01/96]
To turn on the high beams, turn the headlamps on and push
the turn signal lever away from you until it latches. When the
high beams are on, the high beam indicator light on the
instrument panel is illuminated.
*
[CF21500(ALL)01/96]
To return to the low beam setting, pull the turn signal lever
toward you until it latches back into the neutral position. The
high beam indicator light turns off.
*
[CF21600(ALL)01/96]
7-1/2 pica art:0040086-D
High beam and flash-to-pass operation
*
[CF21700(ALL)01/96]
To flash the headlamps, pull the turn signal lever toward you
for a moment and then release it. The high beam headlamps
will flash whether the headlamps are on or off.
File:05vxcfn.ex
Update:Thu May 30 09:49:09 1996