ignition Mercury Villager 1998 s User Guide

3. Using the ªSEEKº function with a cassette tape
While in the tape mode, push the right (
) side of the
ªSEEKº button to seek forward to the next selection on the
tape. Push the left (
) side of the ªSEEKº button to seek the
previous tape selection. The ªTAPEº display blinks.
NOTE: If you want to restart a currently playing tape selection,
press the left (
) side of the ªSEEKº button after
three seconds into the current selection.
4. Using the ªSCANº button to scan cassette selections
Press the ªSCANº button to enter the scan mode (display
blinks ªSCº) to begin the forward scan mode on the tape
currently playing, stopping on each tape selection for a
five-second sampling.
The scan mode continues to the other side of the tape after
one side of the tape has been played completely.
To stop the scan mode on the presently sampled tape selection,
press the ªSCANº button again, or press ªTAPE,º ªCDº (if
equipped), ªTUNE,º or ªSEEK.º
Reversing the direction
The alternate track of the tape can be selected anytime by
pressing the ªSIDE 1-2º button.
How to eject the tape
To stop the tape and eject the cassette, press the ªEJº button. The
tape cartridge can be ejected with radio power (and/or
ignition) on or off.
38

mIf a tape is loose inside the cassette, tighten it before playing
by putting your finger or a pencil into one of the holes and
turning the hub until the tape is tight.
mUsing a Ford Cassette Cleaning Cartridge or equivalent to
clean the tape player head after 10-12 hours of play will
help maintain the best playback sound and proper tape
operation.
Clock Operation
How to View the Clock Mode
Press the ªCLKº button to alternate the frequency/tape/CD (if
equipped) and time in the display. In the clock mode, pressing any
radio/tape/CD (if equipped) function will automatically
display the radio frequency/tape/CD (if equipped) for
approximately ten seconds before changing back to the clock mode.
How to Set the Clock
1. Turn the ignition on and radio on.
2. Press and hold in the ªCLKº button, press the ªSEEKº button
left (
) to advance and right () to decrease the hours,
press the9TUNE9button left (
) to advance and right ()
to decrease the minutes.
NOTE: The clock displays 12-hour time with no A.M./P.M.
indications.
40

Ford CD Changer (If equipped)
The Ford Compact Disc Changer operates when the Premium
Sound or Supersound Audio System is on and a magazine
with disc(s) is inserted. Handle the discs by their edges only. Be
sure to read and follow all of the care and cleaning
instructions underHow to Take Care of and Clean Your CD Changer
and Discs.
NOTE: A CD magazine can be loaded with the ignition ON
whether or not the radio power is on. Inserting a CD
magazine with the radio power off will turn the audio
system on. After the CD magazine is ejected, the
audio system will turn off.
Ford CD Changer
Electronic Sound Systems
41

NOTE: In some instances, the radio may have CD changer
controls, even if there is no CD changer.
The digital display on the radio shows the disc and track
number. Indicators for compression on (ªCOMPº) and shuffle on
(ªSHUFFLEº) are also in the display. These features are
described in more detail later in this chapter.
Once a magazine is inserted, operation of the CD changer will
override that of the cassette player or radio.
NOTE: The volume, bass, treble, balance, and fader controls on
the radio are also used with the CD changer.
Slide the CD door all the way to the right. Insert the magazine
into the magazine opening. If a magazine is already loaded,
pressing ªCDº will start CD play. For the first three seconds
after a disc starts playing, the radio display shows the disc number
(CD-01 for disc 1). From seconds four through six, the track
number is shown (TR-02 for track 2). For the remainder of the
track, the display shows the disc and track number (01-02 for disc
1, track 2).
When the disc reaches the end, the disc changer automatically
goes to the beginning of the next disc and resumes playing.
How to eject the CD magazine
Press the eject button on the lower left of the CD changer to eject
the magazine whether or not the audio system is on.
NOTE: If the ignition key is turned OFF during play and then
is set to the ON or ACCESSORY position, the CD
changer will resume playing in the mode (radio/tape/CD)
it was in when ignition was turned off.
42

NOTE: For maximum heating and cooling for front seat
passengers, set the rear fan switch to the OFF position.
Automatic Temperature Control System
The control for your Automatic Temperature Control (ATC) is
located at the center of the instrument panel above the radio. The
ATC operates only when the ignition key is turned to the ON
position and the engine is running.
To turn the ATC on, push the AUTOMATIC button or any of the
five airflow function selector buttons:
,,,,
or
.
To turn the ATC off, press the OFF button.
To change the temperature in the display window, select any
temperature between 65É F (18É C) and 85É F (29É C) using
the
TEMPbutton.
Rear seat climate control system panel
Controls and Features
67

Liftgate Window Features
Rear Window Defogger (If equipped)
The defogger for the rear liftgate window clears frost, fog, or thin
ice from both the inside and outside of the rear window. The
defogger operates with the ignition in the ON position.
If your vehicle is equipped with heated rearview mirrors, they
activate when the rear window defogger is switched on.
The control switch is located on the instrument panel to the right
of the steering column.
Before using the defogger, clear away any snow that is on the rear
window and outside rearview mirrors. With the engine
running, push the defroster button.
After approximately 10 minutes, the defroster will turn off. If the
window or mirrors are still not clear, turn the defroster on
again.
Rear window defogger switch location
Controls and Features
75

The defroster will turn off when the ignition key is turned to the
OFF or START position.
Never use sharp instruments or abrasive window cleaners to
clean the inside of your rear window. If you do, you may damage
the wires that are bonded to the inside of the rear window, and
cause damage to the rear window defogger.
Rear Wiper and Washer
The controls for the rear wiper and washer can also be found on
the instrument panel to the right of the instrument cluster.
The rear wiper and washer controls operate with the ignition in
the ACC and ON positions.
To turn on the rear wiper, press the RR WIPER switch. The
wiper will operate until it is turned off. The wiper will complete
one cycle every 10 to 15 seconds. To turn off the rear wiper,
press the RR WIPER switch a second time.
Rear wiper and washer switch locations
76

mkeep the headlamps on for approximately three minutes after
you turn the key to OFF
To set the autolamp:
1. Make sure the headlamp control knob is in the OFF position.
If the knob for the headlamps is on, the autolamp system is
canceled.
2. Turn the ignition key to start your vehicle.
3. Use the autolamp thumbwheel to activate the autolamp
feature. It is located to the left of the instrument cluster. The
white mark indicates the approximate center of the
thumbwheel.
4. Move the thumbwheel all the way to the right. The
autolamp will automatically turn the lamps on and off.
Autolamp thumbwheel location
80

NOTE: Be sure that you do not put anything on top of the
photodiode located in the top right side of the
instrument panel speaker grille. The photodiode controls
the autolamp; if it is covered, the photodiode reacts
as if it is nighttime, and the headlamps will be
illuminated.
To turn the autolamp off, move the thumbwheel all the way to the
left.
You can set the autolamp so the headlamps stay on for
approximately three minutes after you turn off your ignition. The
farther the thumbwheel is moved to the right, the longer the
headlamps stay on.
Autolamp photodiode location
Controls and Features
81

Interior Lamps
The front dome lamp is located overhead between the driver and
front passenger seats. However, if your vehicle is equipped
with a power sunroof, the dome lamp is located behind the driver's
seat.
The rear dome lamp is located overhead near the rear seating
positions.
Either dome lamp will stay illuminated if the switch is pushed
to the ON position. The dome lamps will stay off if the switch is
pushed to the OFF position. When the switch is positioned to
the door/middle position, the dome lamps will come on when
either of the front doors or the sliding door is opened. The
front dome lamp, footwell lamps, and the sliding door step lamp
have a time delay feature and will gradually dim within about
15 seconds.
The rear dome lamp also illuminates when the liftgate is opened
and goes off when it is closed. However, the rear dome lamp
will not remain lit in the ON position unless the ignition switch
is in the ON position. This feature is intended to help avoid
a run-down battery which can occur when a light is left on
unintentionally.
The dome lamp switch positions
82