remove seats Mercury Villager 1998 s User Guide

Three-Passenger Bench Seat
When entering and exiting the vehicle, third-row passengers
must be careful that they step over the auxiliary safety restraint
system that is present with the second-row bench seat. Labels are
provided on the back of the second-row bench seat to remind
passengers to use care when exiting.
The three-passenger bench seat can be positioned in any of five
positions along the seat track. Three of these positions are for
seating and two are storage positions to accommodate varying
cargo requirements.
Arranging the Seats for Maximum Cargo Space or
Passenger Seating Flexibility
NOTE: When moving the three-passenger bench seat, the seat
cushion cannot be lowered unless the seat is in a
seating position. If you cannot get the seat cushion to
lower, you may have the seat in a storage position.
NOTE: Before re-positioning seats, remove any floor mats that
may be in the way.
Adjustable Rear Seating
193

Some of the different ways that your vehicle's seats can be
arranged are shown below.
NOTE: Do not try to remove the three-passenger sliding seat.
Removal of the third seat may negatively affect its
ability to slide properly.
194

With the second row seat(s) removed, the three-passenger bench
seat can be moved all the way forward, just behind the front
seats for more room in the cargo area.
196

Moving the Three-Passenger Bench Seat
NOTE: When moving the three-passenger bench seat, the seat
cushion cannot be lowered unless the seat is in a
seating position. If you cannot get the seat cushion to
lower, you may have the seat in a storage position.
The three-passenger bench seat is not removable, but it can be
moved to the second-row position when the second-row captain
seats or second-row bench seat has been removed from the
vehicle.
The three-passenger bench seat slid forward
Adjustable Rear Seating
197

WARNING
After moving the third-row seat, be sure to latch the seat
in a passenger seating position. Improper location of
the seat will prevent correct use of the safety belts and will
increase the risk of severe injury in an accident. After
sliding the seat, check that both sides of the seat are locked
securely by attempting to move each side of the seat
forward and backward. This must be done before the
vehicle is put into motion in order to prevent unintended
movement of the seat and potential passenger injuries.
NOTE: Before rearranging the seats, remove any floor mats
that might be in the way.
The three-passenger seat can be stored behind the second-row
seat(s) to provide extra cargo space in the rear of the vehicle.
With the second row seat(s) removed, the three-passenger bench
seat can be moved all the way forward, just behind the front
seats for more room in the cargo area.
198

Cleaning the Seats
Leather
For routine cleaning, wipe the surface with a soft, damp cloth.
For more thorough cleaning, wipe the surface with a leather and
vinyl cleaner or a mild soap.
Fabric
Remove dust and loose dirt with a whisk broom or a vacuum
cleaner. Remove fresh spots immediately. Follow the directions that
come with the cleaner.
NOTE: Before using any cleaner, test it on a small, hidden area
of fabric. If the fabric's color or texture is adversely
affected by a particular cleaner, do not use it.
Cleaning the Safety Belts
Clean the safety belts with any mild soap solution that is
recommended for cleaning upholstery or carpets. Do not bleach
or dye the belt because this may weaken it.
Cleaning the Instrument Panel Lens
Clean the instrument panel lens with a soft cloth and a glass
cleaner, such as Ford Ultra-Clear Spray Glass Cleaner, or
equivalent. Do not use paper towel or any abrasive cleaner to
clean the lens as these may cause scratches.
332