garage door opener MINI 3 door 2013 Owner's Manual

Interior equipmentVehicle equipmentAll standard, country-specific and optional
equipment that is offered in the model series is
described in this chapter. Therefore, equipment
is also described that is not available in a vehi‐
cle, e. g., because of the selected optional
equipment or country variant. This also applies
for safety-related functions and systems.
Universal garage dooropener
The concept
The universal garage door opener can operate
up to 3 functions of remote-controlled systems
such as garage door drives or lighting systems.
The universal garage door opener replaces up
to 3 different hand-held transmitters. To oper‐
ate the remote control, the buttons on the inte‐
rior rearview mirror must be programmed with
the desired functions. The hand-held transmit‐
ter for the particular system is required in order
to program the remote control.
During programming
During programming and before activat‐
ing a device using the integrated universal re‐
mote control, ensure that there are no people,
animals, or objects in the range of movement
of the remote-controlled device; otherwise,
there is a risk of injury or damage.
Also follow the safety instructions of the hand-
held transmitter. ◀
Before selling the vehicle, delete the stored
functions for the sake of security.Compatibility
If this symbol is printed on the packag‐
ing or in the instructions of the system
to be controlled, the system is generally
compatible with the universal garage door
opener.
If you have any questions, please contact:▷Your service center.▷www.homelink.com on the Internet.
HomeLink is a registered trademark of Johnson
Controls, Inc.
At a glance
1LED2Programmable keys3Hand-held transmitters of the system
Programming
General information
1.Switch on the ignition.2.Initial setup:
Press and hold the left and right button on
the interior rearview mirror simultaneously
for approximately 20 seconds until the LED
on the interior rearview mirror flashes. This
erases all programming of the buttons on
the interior rearview mirror.Seite 110ControlsInterior equipment110
Online Edition for Part no. 01 40 2 925 116 - X/13

3.Hold the hand-held transmitter for the sys‐
tem to be controlled approx. 1 to 3 in/2.5
to 8 cm away from the buttons on the inte‐
rior rearview mirror. The required distance
depends on the manual transmitter.4.Simultaneously press and hold the button
of the desired function on the hand-held
transmitter and the button to be program‐
med on the interior rearview mirror. The
LED on the interior rearview mirror will be‐
gin flashing slowly.5.Release both buttons as soon as the LED
flashes more rapidly. When the LED is flash‐
ing faster, this indicates that the button on
the interior rearview mirror has been pro‐
grammed.
If the LED does not flash faster after at least
60 seconds, change the distance between
the interior rearview mirror and the hand-
held transmitter and repeat the step. Sev‐
eral more attempts at different distances
may be necessary. Wait at least 15 seconds
between attempts.
Canada: if programming with the hand-
held transmitter was interrupted, hold
down the interior rearview mirror button
and repeatedly press and release the hand-
held transmitter button for 2 seconds.6.To program other functions on other but‐
tons, repeat steps 3 to 5.
The systems can be controlled using the interior
rearview mirror buttons.
Special feature of the alternating-code
wireless system
If you are unable to operate the system after
repeated programming, please check if the sys‐
tem to be controlled features an alternating-
code system.
Read the system's operating manual, or press
the programmed button on the interior rear‐
view mirror longer. If the LED on the interior
rearview mirror starts flashing rapidly and then
stays lit constantly for 2 seconds, the system
features an alternating-code system. Flashing
and continuous illumination of the LED will re‐
peat for approximately 20 seconds.
For systems with an alternating-code system,
the universal garage door opener and the sys‐
tem also have to be synchronized.
Please read the operating manual of the sys‐
tem being set up for information on how to
synchronize the system.
Synchronizing is easier with the aid of a second
person.
To synchronize:1.Park the vehicle within range of the re‐
mote-controlled system.2.Program the relevant button on the interior
rearview mirror as described.3.Locate and press the synchronizing button
on the system being programmed. You
have approx. 30 seconds for the next step.4.Hold down the programmed button on the
interior rearview mirror for approximately
3 seconds and then release it. If necessary,
repeat this work step up to three times in
order to finish synchronization. Once syn‐
chronization is complete, the programmed
function will be carried out.
Reprogramming individual buttons
1.Switch on the ignition.2.Press and hold the interior rearview mirror
button to be programmed.3.As soon as the interior rearview mirror LED
starts flashing slowly, hold the hand-held
transmitter for the system to be controlled
approx. 1 to 3 in/2.5 to 8 cm away from the
buttons on the interior rearview mirror. The
required distance depends on the manual
transmitter.Seite 111Interior equipmentControls111
Online Edition for Part no. 01 40 2 925 116 - X/13

Fuel consumption, refer toAverage fuel consump‐
tion 64
Fuel filler flap 162
Fuel gauge 59
Fuel quality 164
Fuel recommendation 164
Fuel, tank capacity 211
Fuse 197
G Garage door opener, refer to Universal garage door
opener 110
Gasoline 164
Gasoline quality 164
Gear change, automatic trans‐ mission 53
Gear selector lever, automatic transmission 53
Gear shift indicator 61
General driving notes 124
Glass sunroof, refer to Panor‐ amic glass sunroof 30
Glove compartment 118
Gong, volume equaliza‐ tion 138
GREEN mode 131
GREEN mode, bonus range 132
GREEN mode indicator 131
GREEN - program, driving dy‐ namics 88
GREEN tip 133
Gross vehicle weight, ap‐ proved 210
Ground clearance 126
H Halogen headlamps 188
Handbrake, refer to parking brake 48
Hand-held transmitter, alter‐ nating code 111 Hands-free system 152
Hazard warning flashers 198
HD Radio 141
Head airbags 71
Headlamp control, auto‐ matic 67
Headlamp courtesy delay fea‐ ture 67
Headlamp flasher 49
Headlamp glass 187
Headlamps, care 204
Headlamp washer system 49
Headliner 15
Head restraints 32
Head restraints, front 35
Head restraints, rear 36
Heavy cargo, stowing 128
High-beam Assistant 68
High beams 49
High beams/low beams, refer to High-beam Assistant 68
Hills 126
Hill start assistant, refer to Drive-off assistant 89
Hints 6
Holder for beverages 119
Homepage 6
Hood 178
Horn 12
Hot exhaust system 125
Hydroplaning 125
I
Ice warning, refer to External temperature warning 59
Icy roads, refer to External temperature warning 59
Identification marks, tires 169
Identification number, refer to Important features in the en‐
gine compartment 178
Ignition key, refer to Remote control 20
Ignition off 44
Ignition on 44 Illuminated ring, central in‐
strument cluster 65
Indication of a flat tire 75, 78
Individual air distribu‐ tion 105, 107
Individual settings, refer to Personal Profile 21
Inflation pressure, tires 166
Inflation pressure warning, tires 77
Info display, refer to Com‐ puter 63
Initialize, Tire Pressure Moni‐ tor TPM 75
Initializing, Flat Tire Monitor FTM 78
Instrument cluster 56
Instrument cluster, electronic displays 57
Instrument lighting 70
Integrated key 20
Intelligent Safety 79
Intensity, AUTO program 107
Interior equipment 110
Interior lamps 70
Interior lamps via remote con‐ trol 22
Interior motion sensor 28
Interior rearview mirror, auto‐ matic dimming feature 38
Interior rearview mirror, com‐ pass 112
Interior rearview mirror, man‐ ually dimmable 38
Internet site 6
Interval display, service re‐ quirements 60
J Jacking points for the vehicle jack 194
Joystick, automatic transmis‐ sion 53
Jump-starting 198 Seite 223Everything from A to ZReference223
Online Edition for Part no. 01 40 2 925 116 - X/13