bolt pattern MINI COOPER 2005 Owners Manual

128
CHANGING TIRES Jacking up the vehicle 1. Place the jack at the jacking point closest
to the wheel.

The jack base must be perpendicular to
the surface beneath the jacking point
The vehicle jack is designed for changing wheels only. Do not
attempt to raise another vehicle model
with it or to raise any load of any kind. To
do so could cause accidents and personal
injury.<
2.
During jacking up, insert the jack head in the square recess of the jacking point
3. Jack the vehicle up until the wheel you
are changing is raised from the ground.Mounting a wheel1. Unscrew the lug bolts and remove the
wheel2. Remove accumulations of mud or dirt
from the mounting surfaces of the
wheel and hub. Clean the lug bolts3. Mount the new wheel4. Screw at least two lug bolts finger-tight
into opposite bolt holes 5. Screw in the remaining bolts
6. Tighten all the lug bolts firmly in a diag
-
onal pattern
7. Lower the vehicle8. Remove the jack.Tightening the lug bolts Tighten the lug bolts in a diagonal pattern.
As soon as possible, have the secure seating of the lug bolts, tightening
torque 88.5
lb ft / 120
Nm, checked using a
calibrated torque wrench. Otherwise, a
wheel coming loose can lead to a severe
accident.<
Replace the defective tire as soon as possi
-
ble and have the new wheel/tire assembly
balanced.
ProCarManuals.com