ECO mode MINI Countryman 2013 Owner's Manual
[x] Cancel search | Manufacturer: MINI, Model Year: 2013, Model line: Countryman, Model: MINI Countryman 2013Pages: 275, PDF Size: 4.09 MB
Page 11 of 275

AT A GLANCECockpit
10
Cockpit
Vehicle equipment
In this chapter, all production, country, and 
optional equipment that is offered in the model range is described. Equi
pment is also described 
that is not available because of, for example, 
selected options or coun try version. This also 
applies to safety relate d functions and systems.
Around the steering wheel
00320051004F004C00510048000300280047004C0057004C005200510003  
Page 15 of 275

AT A GLANCECockpit
14
Around the center console
1Hazard warning flashers
2 Speedometer 12
3 Radio/CD 143 4
Air conditioner or automatic climate 
control 88
Selecting waveband
Changing the audio source
Changing the radio  station or track
Ejecting CD
Temperature
Recirculated-air mode
Air distribution for air conditioner
Air distribution to the windshield
Air distribution to the upper body 
area
00320051004F004C00510048000300280047004C0057004C005200510003  
Page 27 of 275

CONTROLSOpening and closing
26
Opening and closing
Vehicle equipment
In this chapter, all production, country, and 
optional equipment that is offered in the model 
range is described. Equipment is also described 
that is not available because of, for example, 
selected options or coun try version. This also 
applies to safety relate d functions and systems.
Keys/remote controls
Buttons on the remote control
1Opening the tailgate
2 Unlocking
3 Locking
General information
Each remote control co ntains a rechargeable 
battery that is recharged when it is in the igni-
tion lock while the car is being driven. You 
should therefore use each remote control at 
least twice a year to maintain the charge status. 
In vehicles equipped with Comfort Access, the 
remote control contains  a replaceable battery, 
page 35.
If more than one remote control unit is used, the 
settings called up and implemented depend on 
which remote control is  recognized when the 
car is unlocked, refer  to Personal Profile, 
page 26. In addition, information about service require-
ments is stored in the remote control, refer to 
Service data in the remote control, page
218.
New remote controls
Your MINI dealer can supply new remote con-
trols as additional units or as replacements in the 
event of loss.
Integrated key
Press button1 to release the key.
The integrated key fits the following locks:
> Driver's door, page 29
Personal Profile
The concept
The functions of your MINI can be set individu-
ally. By means of Personal  Profiles, most of these 
settings are stored for  the remote control cur-
rently in use. When you unlock the car, the 
remote control is recognized and the settings 
stored for it are called up and implemented.
This means that your settings will be activated 
for you, even if in the meantime your car was 
used by someone else with another remote con-
trol and the corresponding settings.
Individual settings are  stored for a maximum of 
three remote controls.
00320051004F004C00510048000300280047004C0057004C005200510003  
Page 33 of 275

CONTROLSOpening and closing
32
The handle recesses on the interior trim panel of 
the tailgate make it easier to pull it down.
Alarm system
The concept
The alarm system, when activated, reacts if:
>A door, the engine compartment lid or the 
tailgate is opened
> There is movement inside the car
> The car's inclination changes, for instance if 
an attempt is made to ja ck it up and steal the 
wheels or to raise it prior to towing it away
> There is an interruption in the power supply 
from the battery
The alarm system briefly indicates unauthorized 
entry or tampering by means of:
> An acoustic alarm
> Switching on the haza rd warning flashers
Arming and disarming
General information
Whenever the car is locked or unlocked, the 
alarm system is armed or disarmed.
Door lock with armed alarm system
Because of the design, unlocking the door lock 
may trigger the alarm  in some countries.
To turn off the alarm, unlock the vehicle using 
the remote control or switch on the ignition.
Tailgate with armed alarm system
Even when the alarm syst em is armed, you can 
open the tailgate by means of the  button 
on the remote control.
When you subsequently close the tailgate it is 
again locked and monitored.
Panic mode
You can activate the alarm system if you find 
yourself in a dangerous situation.
Press the   button for at least 2 seconds.
Switching off the alarm: 
Press any button.
Switching off an alarm
> Unlock the car with the remote control.
> Insert the key fully into the ignition lock.
> In cars with Comfort Access, press the button 
on the door lock.
Display on the revolution counter
When the system is armed, all LEDs pulse. After 
approx. 16 minutes one LED flashes.
>LEDs pulse or LED flashes: system is armed.
> One LED flashes at short intervals:
Doors, the hood or the tailgate are not prop-
erly closed. Even if these are not closed fully, 
the remaining items ar e deadlocked and the 
LEDs pulse after approx. 10 seconds for 
approx. 16 minutes. Afterwards, one LED 
flashes.
The interior movement detector is not acti-
vated.
> LEDs go out after the vehicle is unlocked:
No attempt was made to tamper with the 
car.
> LEDs flash after unlocking until the key is 
inserted in the ignition, but for no longer 
than approx. 5 minutes: an attempt was 
made to tamper with the vehicle.
00320051004F004C00510048000300280047004C0057004C005200510003  
Page 34 of 275

Opening and closingCONTROLS
 33
Tilt alarm sensor
The vehicle's inclination is monitored. The alarm 
is triggered, for instance, if an attempt is made 
to steal the vehicle's wheels or tow it away.
Interior movement detector
Before the interior movement detector can 
operate correctly, the windows and glass roof 
must be closed.
Avoiding false alarms
The tilt alarm sensor an d the interior movement 
detector can be swit ched off together.
This prevents false alarms, e.g. in the following 
situations:
> In duplex garages
> When being transported on car-carrying 
trains, ferries or trailers
> If pets are to remain inside the car
Switching off the tilt alarm sensor and 
interior movement detector
Press the   button on the remote control 
twice in succession.
LEDs flash in short succession for approx. 
2 seconds.
The tilt alarm sensor an d the interior movement 
detector are switched of f until the car is next 
unlocked and locked.
Comfort Access
The concept
Access to the vehicle is po ssible without the use 
of the remote control. All you need to do is wear 
the remote control close to your body, e.g. in 
your jacket pocket. Th e vehicle automatically 
detects the remote control within the immedi-
ate vicinity or in the passenger compartment.
Comfort Access supports  the following func-
tions: >
Unlocking/locking the vehicle
> Convenient closing
> Unlocking the tailgate separately
> Starting the engine
Functional requirements
>There are no external malfunction sources in 
the vicinity.
> For locking, the remote  control must be out-
side of the vehicle.
> The vehicle cannot be locked or unlocked 
again until after approx. 2 seconds.
> The engine can only be started if the remote 
control is in the vehicle.
> The doors and tailgate mu st be closed to be 
able to operate the windows and glass roof.
Comparison to standard remote controls
The indicated function can be operated by 
pressing the buttons or via Comfort Access.
Instructions on openin g and closing are found 
starting on page 26.
If you notice a brief  delay while opening or 
closing the windows or  glass roof, the sys-
tem is checking whether a remote control is 
inside the vehicle. Repeat the opening or closing 
procedure, if necessary. <
Unlocking
Press button 1.
Depending on the setting, refer to Unlocking 
mode on page 27, only the driver's door or the 
entire vehicle is unlocked.
00320051004F004C00510048000300280047004C0057004C005200510003  
Page 37 of 275

CONTROLSOpening and closing
36
Following interruptions in electrical 
power supply
After a power failure, there is a possibility that 
the glass roof can only be tilted. In this case, 
have the system initialized. The manufacturer of 
your MINI recommends that you have this work 
done by your MINI dealer.
Windows
General information
To prevent injuries, exercise care when 
closing the window and keep it in your 
field of vision until it is shut. 
Take the remote control with you when you 
leave the car; otherwise, children could operate 
the electric windows and possibly injure them-
selves. <
If, after a window is opened and closed 
several times in close succession, the win-
dow can only be closed and not opened, the sys-
tem is overheated. Let the system cool for sev-
eral minutes with the ignition switched on or the 
engine running. <
Opening, closing
Front window
To open:
>Press the switch to the resistance point.
The window continues to open as long as 
the switch is held. >
Press the switch beyo nd the resistance 
point. 
The window opens automatically in radio 
readiness mode or higher.
Push the switch again  to stop the opening 
movement.
To close:
> Pull the switch to th e resistance point.
The window continues to close as long as 
the switch is held.
> Pull the switch beyond  the resistance point. 
The window closes automatically.
Pushing the switch agai n stops the operation.
MINI Countryman: rear window
To open:
>Press the switch to the resistance point.
The window continues to open as long as 
the switch is held.
> Press the switch beyo nd the resistance 
point. 
The window opens automatically in radio 
readiness mode or higher.
To close:
> Pull the switch to th e resistance point.
The window continues to close as long as 
the switch is held.
> Pull the switch beyond  the resistance point. 
The window closes automatically.
Pushing the switch agai n stops the operation.
00320051004F004C00510048000300280047004C0057004C005200510003  
Page 55 of 275

CONTROLSDriving
54
Sport program and manual mode M/S
Move the selector lever from position D to the 
left into the M/S shifting slot:
The Sport program is activated and DS is dis-
played. This position is recommended for a per-
formance-oriented driving style.
To deactivate the Sport program or manual 
mode M/S, move the selector lever to the right 
into position D.
Shifting with the selector lever
Push the selector lever forward or pull it back to 
activate manual operation.  Steptronic shifts the 
gear.
> Pull the selector lever in the + direction.
Transmission shifts up.
> Push the selector leve r in the – direction.
Transmission shifts down.
The selected gear is displayed in the tachome-
ter, e.g. M1.
To use the automatic mode again, move the 
selector lever to the right into position D.
Upshifts and downshifts are executed only when 
they will result in a plausible combination of 
engine and vehicle speed; thus, for example, a 
downshift that would cause the engine to over-
rev will not be executed by the system. The 
selected gear is displayed briefly, followed by 
the current gear.
Shifting on the steering wheel
With the selector lever in position D, automatic 
drive, you can shift gears using the shift paddles 
on the steering wheel. The transmission auto-
matically switches to manual mode. If you do not shift gears with the shift paddles or 
accelerate for a certai
n amount of time, the 
transmission automatically returns to D, auto-
matic drive.
> Pull one of the shift paddles.
Transmission shifts up.
> Push one of the shift paddles.
Transmission shifts down.
M1 through M6 are displayed in the tachometer.
Manually releasing the selector lever 
lock
Should the selector lever refuse to move out of 
position P even though the ignition is switched 
on, the brake is depressed and the button on the 
selector lever is pressed, the selector lever lock 
can be overridden:
1. Unclip the sleeve of the selector lever.
2. Pull the sleeve up over the selector lever 
until the sleeve is insi de out. Disconnect the 
cable connector if necessary.
3. Insert extractor hook 1 into the loop on the 
passenger's side.
00320051004F004C00510048000300280047004C0057004C005200510003  
Page 61 of 275

CONTROLSControls overview
60
Controls overview
Vehicle equipment
In this chapter, all production, country, and 
optional equipment that is offered in the model 
range is described. Equipment is also described 
that is not available because of, for example, 
selected options or coun try version. This also 
applies to safety relate d functions and systems.
Fuel gauge
Fuel tank capacity
Approx. 12.4 US gal/47 liters.
You will find information on refueling on 
page 201.
If the tilt of the vehicle varies for a longer period, 
when you are driving in  mountainous areas, for 
example, the indicator may fluctuate slightly.
The arrow next to the gas pump symbol of the 
fuel gauge points toward the side of the vehicle 
with the fuel filler flap.
Reserve
Once the fuel level has fallen to the reserve zone 
of approx. 2.1 US gal/8 liters the remaining LEDs 
change from orange to  red, arrow, and a mes-
sage is displayed briefly on the Control Display. 
The tachometer
 displays the remaining cruising 
range. When the range is less than approx. 
30 miles/50 km, the messa ge remains in the 
Control Display. If the range displayed is less than 
30 miles/50 km, be sure to refuel; other-
wise, engine functions are not guaranteed and 
damage may occur. <
With a dynamic driving style, e.g. rapid corner-
ing, engine functions  are not always assured.
Tachometer
Never operate the engine with the needle in the 
red overspeed zone of the gauge. In this range, 
the fuel supply is interrupted to protect the 
engine.
Displays in tachometer
1Current vehicle speed
2 Odometer in kilometers, trip recorder, 
external temperature, time
3 Resetting the trip odometer
Press button on turn signal indicator to call up 
information in the display area 2.
00320051004F004C00510048000300280047004C0057004C005200510003  
Page 72 of 275

Technology for driving comfort and safetyCONTROLS
 71
Technology for driving comfort and 
safety
Vehicle equipment
In this chapter, all production, country, and 
optional equipment that is offered in the model 
range is described. Equipment is also described 
that is not available because of, for example, 
selected options or count ry version. This also 
applies to safety related functions and systems.
Park Distance Control 
PDC
The concept
PDC assists you with parking in reverse. Acoustic 
signals and a visual indicator
 warn you of the 
presence of an object behind the vehicle. The 
measurement is carried out by four ultrasonic 
sensors in the rear bumper.
These sensors have a range of approx. 
6.5ft/2m. However, an  acoustic warning 
does not sound until an object is approx. 24 in/
60 cm from the rear corner sensors or approx. 
5 ft/1.50 m from the rear center sensors. PDC is 
a parking aid that can indicate objects when 
they are approached slowly, as is usually the 
case when parking. Avoid approaching an 
object at high speed; otherwise, physical cir-
cumstances may lead to the system warning 
being issued too late. <
Automatic mode
With the engine running or the ignition switched 
on, the system is activated automatically after 
approx. 1 second when you engage reverse 
gear or move the automatic transmission selec-
tor lever to position R. Wait this short period 
before driving.
Acoustic signals
As the distance between vehicle and object 
decreases, the intervals between the tones 
become shorter. If the distance to the nearest 
object falls to below roughly 1 ft/30 cm, then a 
continuous tone sounds.
If the distance remains constant, e.g. when driv-
ing parallel to a wall, th e acoustic signal stops 
after approx. 3 seconds.
Malfunction
Indicator lamp lights up. PDC has failed. 
A message appears on the Control Dis-
play. Have the system checked.
To avoid this problem, keep the sensors clean 
and free of ice or snow in order to ensure that 
they will continue to operate effectively. When 
using a high-pressure clea ner, do not direct the 
jet toward the sensors for lengthy periods and 
only spray from a distance of at least 4 in/10 cm.
PDC with visual warning
To have the system show distances to objects on 
the Control Display. The contours of distant 
objects are shown on the Control Display even 
before the acoustic sign al sounds. The display 
appears on the Control Di splay as soon as the 
transmission is shifted in to reverse or the selec-
tor lever is moved into the R position.
System limitations
Even with PDC, final re sponsibility for esti-
mating the distance between the vehicle 
and any obstructions always remains with the 
driver. Sensors, too, ha ve blind spots in which 
objects cannot be detected. Moreover, ultra-
sonic detection can reach its physical limits with 
objects such as trailer  tow bars and couplings, 
thin and wedge-shaped objects, etc. Low 
objects already indicated,  such as curbs, may 
00320051004F004C00510048000300280047004C0057004C005200510003  
Page 75 of 275

CONTROLSTechnology for driving comfort and safety
74
Deactivating both DTC and DSC
Press the switch for at least 3 seconds; the indi-
cator lamp DSC OFF on the speedometer comes 
on and DSC OFF is displayed on the tachometer.
The Dynamic Traction Control DTC and Dynamic 
Stability Control DSC are both deactivated. There 
will be no more stabilizing interventions.
Interventions (differential lock) in braking occur 
to improve propulsion when drive wheels are 
rotating unevenly, even when DSC is deacti-
vated.
Activating DSC
Press the switch again: the indicator lamps in the 
display elements go out.
Hill Assist
Hill Assist aids you in co mfortably driving off on 
inclines. It is not necessary to use the parking 
brake for this.
1. Hold the MINI with the brake.
2. Release the brake and immediately drive 
off.
Hill Assist holds the car in place for approx. 
2 seconds after the brake is released. Depending on the load and gradient, the 
vehicle can roll backwa rd slightly during 
this period. After you release the brake, immedi-
ately start driving since the Hill Assist only holds 
the vehicle for about 2 seconds, and it will start 
to roll backward. <
ALL4 all-wheel drive system
ALL4 is the all-wheel driv e system of your MINI. 
The combined effects of  ALL4 and DSC further 
optimize the traction and dynamic driving char-
acteristics. The ALL4 all- wheel drive system vari-
ably distributes the drive force to the front and 
rear axle depending on the driving situation and 
prevailing road conditions.
Sport button
Pressing the button causes your MINI to respond 
even more sportily.
> Engine responds more spontaneously to 
movements of the accelerator.
> Steering response  is more direct.
> Cooper S, John Cooper Works: the engine 
sounds more sporty in coasting mode.
With automatic transmission:
> More rapid gear shifting in Sport program.
Activating the system
Press the switch.
The LED lights up.
SPORT is briefly displayed in the tachometer.
Deactivating the system
>Press the switch again.
> Switch off the engine.
00320051004F004C00510048000300280047004C0057004C005200510003