trailer MINI COUPE ROADSTER CONVERTIBLE 2012 Owners Manual

CONTROLSOpening and closing
36
MINI Convertible, MINI Roadster
The passenger compartment is monitored up to
the height of the seat's surface. This way, the
anti-theft alarm system including the interior
motion sensor are armed, even if the convertible
top is open. Falling objects, e.g. tree leaves, may
trigger a false alarm, refer to Avoiding false
alarms.
Avoiding false alarms
The tilt alarm sensor and the interior movement
detector can be switched off together.
This prevents false alarms, e.g. in the following
situations:
>In duplex garages
> When being transported on car-carrying
trains, ferries or trailers
> If pets are to remain inside the car
Switching off the tilt alarm sensor and
interior movement detector
>Press the button on the remote
control twice in succession.
> Lock the vehicle twice with the integrated
key.
LEDs flash in short succession for approx.
2seconds.
The tilt alarm sensor and the interior movement
detector are switched off until the car is next
unlocked and locked.
Comfort Access
The concept
Access to the vehicle is possible without the use
of the remote control. All you need to do is wear
the remote control close to your body, e.g. in
your jacket pocket. The vehicle automatically
detects the remote control within the immedi-
ate vicinity or in the passenger compartment.
Comfort Access supports the following
functions:
> Unlocking/locking the vehicle
> Unlocking the tailgate separately
> Starting the engine
> MINI Convertible: convenient closing and
soft-top control with the remote control for
Comfort Access
> MINI Coupe, MINI Roadster: closing the side
windows
Functional requirements
>There are no external malfunction sources in
the vicinity.
> For locking, the remo te control must be
outside of the vehicle.
> The vehicle cannot be locked or unlocked
again until after approx. 2 seconds.
> The engine can only be started if the remote
control is in the vehicle.
> The doors and tailgate must be closed to
operate the windows.
Comparison to standard remote controls
The indicated function can be operated by
pressing the buttons or via Comfort Access.
Instructions on opening and closing are found
starting on page 28.
If you notice a brief delay while opening or
closing the windows or cover, the system
is checking whether a re mote control is inside
the vehicle. Repeat the opening or closing
procedure, if necessary. <

00320051004F004C00510048000300280047004C0057004C005200510003

CONTROLSTechnology for driving comfort and safety
82
Technology for driving comfort
and safety
Vehicle equipment
In this chapter, all production, country, and
optional equipment that is offered in the model
range is described. Equipment is also described
that is not available because of, for example,
selected options or coun try version. This also
applies to safety relate d functions and systems.
Park Distance Control
PDC
The concept
PDC assists you with parking in reverse. Acoustic
signals and a visual indi cator warn you of the
presence of an object behind the vehicle. To
measure the distance, there are four ultrasonic
sensors in either bumper.
These sensors have a range of approx. 6.5 ft/
2m. However, an acoust ic warning does not
sound until an object is approx. 24 in/60 cm
from the rear corner sensors, or approx. 5 ft/
1.50 m from the rear center sensors.
PDC is a parking aid that can indicate
objects when they are approached slowly,
as is usually the case when parking. Avoid
approaching an object at high speed; otherwise,
physical circumstances ma y lead to the system
warning being issued too late. <
Automatic mode
With the engine running or the ignition switched
on, the system is activated automatically after
approx. 1 second when you engage reverse
gear or move the automatic transmission selec-
tor lever to position R. Wait this short period
before driving.
Acoustic signals
As the distance between vehicle and object
decreases, the intervals between the tones
become shorter. If the distance to the nearest
object falls to below roughly 1 ft/30 cm, then a
continuous tone sounds.
If the distance remains co nstant, e.g. when driv-
ing parallel to a wall, the acoustic signal stops
after approx. 3 seconds.
Malfunction
Indicator lamp lights up. PDC has failed.
A message appears on the Control
Display. Have the system checked.
To avoid this problem, keep the sensors clean
and free of ice or snow in order to ensure that
they will continue to operate effectively. When
using a high-pressure cleaner, do not direct the
jet toward the sensors for lengthy periods and
only spray from a distance of at least 4 in/10 cm.
PDC with visual warning
To have the system show distances to objects on
the Control Display. The contours of distant
objects are shown on the Control Display even
before the acoustic sign al sounds. The display
appears on the Control Display as soon as the
transmission is shifted into reverse or the
selector lever is moved into the R position.
System limitations
Even with PDC, final responsibility for esti-
mating the distance between the vehicle
and any obstructions always remains with the
driver. Sensors, too, have blind spots in which
objects cannot be dete cted. Moreover, ultra-
sonic detection can reach its physical limits with
objects such as trailer tow bars and couplings,
thin and wedge-shaped objects, etc. Low
objects already indicated, such as curbs, may

00320051004F004C00510048000300280047004C0057004C005200510003

DRIVING TIPSThings to remember when driving
118
Split-folding rear seats
To be able to transport larger objects, the rear
backrest can be folded down.
1.If necessary, use the integrated key to open
the backrest lock 1.
2. Press button 2 and fold down backrest
together with the belt strap.
3. Fold the backrest forward.
When folding the backrest back into its
original position, alwa ys ensure that the
catch engages securely. A loose backrest might
fail to prevent cargo from entering the passen-
ger compartment during sudden braking or
evasive maneuvers, posing a potential hazard to
occupants.
The belt guide loop, refer to page 54, must be
closed. <
Determining cargo limit
1.Locate the following statement on your
vehicle's placard:
The combined weight of occupants
and cargo should never exceed
XXX kg or YYY lbs. Otherwise, this could
damage the vehicle and produce unstable
vehicle operating conditions. <2.
Determine the combined weight of the
driver and passengers that will be riding in
your vehicle.
3. Subtract the combined weight of the driver
and passengers from XXX pounds or YYY
kilograms.
4. The resulting figure equals the available
amount of cargo and luggage load capacity.
For example, if the XXX amount equals
1,400 lbs and there will be four 150 lb-pas-
sengers in your vehicle, the amount of avail-
able cargo and luggage load capacity is
650 lbs:
1,400 lbs minus 750 lbs = 650 lbs.
5. Determine the combined weight of luggage
and cargo being loaded on the vehicle. That
weight may not safely exceed the available
cargo and luggage load capacity calculated
in step 4.
6. If your vehicle will be towing a trailer, part of
the load from your trailer will be transferred
to your vehicle. Consult the manual for
transporting a trailer to determine how this
may reduce the available cargo and luggage
load capacity of your vehicle.
Load
MINI Coupe, MINI Roadster:

00320051004F004C00510048000300280047004C0057004C005200510003

REFERENCEEverything from A to Z
280
Traffic information in navigation
– screen display in the map view 141
Trailer operation
– trailer loads and gross vehicle weight 257
Transmission
– automatic transmission with Steptronic 62
– manual transmission 62
– overriding selector lever lock for automatic transmission
with Steptronic 64
Transporting children safely 56
Transport securing devices,
refer to Securing cargo 119
Tread depth, refer to Minimum tire tread 218
Treble, refer to Tone control 147
Trip computer 73
Trip-distance counter, refer to Trip odometer 71
Triple turn si gnal activation 65
Trip odometer 71
Trunk, refer to Luggage compartment in the MINI
Convertible 117
Trunk lid
– emergency operation, refer to Manual unlocking 33
Turning circle, refer to
Dimensions 251
Turn signal 65
– front, replacing bulb 234
– indicator lamp 12,13
– rear, replacing bulb 235
– side, replacing bulb 235
Tying down load s, refer to
Cargo loading 119U
Uniform Tire Quality Grading
UTQR 217
Units
– average fuel consumption 74
– temperature 74
Unlatching, refer to Unlocking 37
Unlocking
– from inside 32
– from outside 30
– tailgate 37
– without remote control, refer
to Comfort Access 36
Updating the navigation
data 124
Upholstery, care 229
USB audio interface 160
USB interface 107
Using contact data 199
V
Valve
– dust cap240
Vehicle
– battery 241
– breaking in 114
– cargo loading 116
– dimensions 251
– identification number, refer to Engine compartment 221
– parking 61
– storage 230
– weight 257
Vehicle equipment 4
Vehicle jack 231
– jacking points 241
Ventilation
– air conditioner 106
Vents, refer to Air vents 101
Vents, refer to Ventilation 106Voice commands
– overview
23
– short commands 260
– telephone 189
Voice instructions for navigation system 139
– repeating 139
– switching on/off 139
– volume 139
Voice phone book 190
Volume 146
– audio sources 146
– mobile phone 173,185
– voice instructions 139
Volume balance, tone setting 147
Volume of cargo area 257
W
Warning and indicator
lamps 13
Warning messages, refer to Check Control 77
Warning triangle 243
Washer fluid 67
– capacity of reservoir 67
Washer fluid reservoir 67
Waste tray, refer to Ashtray 109
Waterfall lighti ng, refer to
Ambient lighting 100
Water on roads, refer to
Driving through water 115
Waveband for radio 149
Wear indicators in tires, refer to
Minimum tread depth 218
Weights 257
Welcome lamps 97
Wheelbase, refer to Dimensions 251
Wheels, new 219
Wheels and tires 209
Wheel stud wrench
– space-saver spare tire 231

00320051004F004C00510048000300280047004C0057004C005200510003