wheel bolts MINI Hardtop 2 Door 2005 Owner's Manual

125
OVERVIEW REPAIRSOPERATION CONTROLS DATA INDEX
REPAIRING A FLAT TIRE
SPACE-SAVER SPARE TIRE
*
Safety measures in the event of a flat tire:

Stop the vehicle as far as possible from
passing traffic. Switch on the hazard warn
-
ing flashers.

Turn the steering wheel to the straight-
ahead wheel position and engage the
steering lock. Engage the parking brake and
shift into 1st or reverse gear – selector lever
in P.

All passengers should be outside the vehi
-
cle and well away from your immediate
working area – behind a guardrail, for
instance.

If a portable hazard warning lamp is avail
-
able, set it up on the roadside at an appro
-
priate distance from the rear of the vehicle.
Comply with all safety guidelines and regu
-
lations. -
dures should be followed depending on the
equipment included in your vehicle:>Vehicles with Run Flat tires, refer to
page
101
>Vehicles with a space-saver spare tire,
refer to the following section>Vehicles with MINI Mobility System,
refer to page
129
.
To change a space-saver spare tire, proceed
as follows:>Remove space-saver spare tire, refer to
the section after the next one>Prepare for tire change, refer to page
127
>Jack up the vehicle, refer to page
128
>Mount the space-saver spare tire, refer
to page
128
>Tighten the lug bolts, refer to page
128
>Drive with space-saver spare tire, refer to
page
127
.
Tire change setOn vehicles with a space-saver spare tire,
the tire change set with onboard tools is
stored in the luggage compartment under
the floor mat.1 Chock, folding2 Hubcap remover3 Wheel stud wrench4Jack5 Special wrench for removing the space-
saver spare tire6 Towing eyelet7 Lifting handleThe onboard tool kit includes a pouch with
a plastic bag in which you can place the
damaged wheel.

127
OVERVIEW REPAIRSOPERATION CONTROLS DATA INDEX
SPACE-SAVER SPARE TIRE
*
CHANGING TIRES
9.
Pull out the space-saver spare tire towards the rear underneath the vehi
-
cle
10. Position the space-saver spare tire with
the valve facing upwards11. Unscrew the valve extension from the
valve of the space-saver spare tire12. Unscrew the dust cap from the exten
-
sion and place it on the valve of the
space-saver spare tire.Due to its different dimensions, the damaged wheel cannot be placed in
the recess for the space-saver spare tire.<
Driving with the space-saver spare tireDrive cautiously. Do not exceed a speed of
50 mph
/ 80
km/h.
You must expect changes in vehicle han
-
dling such as lower track stability during
braking, longer braking distances and
changes in self-steering properties when
close to the handling limit. These effects
are more pronounced when driving with
winter tires.
Only one space-saver spare tire may be mounted at one time. Reinstall a
wheel and tire of the original size as soon
as possible. if necessary. Replace the defective tire as
soon as possible and have the new wheel/
tire assembly balanced.<
Additional safety measures in the event of a tire change:

Change the tire only on a level, firm surface
which is not slippery.

The vehicle or the jack could slip sideways
on soft or slippery support surfaces, such as
snow, ice, flagstones, etc..

Do not use a wooden block or similar object
as a support base for the jack, as this would
prevent it from extending to its full support
height and reduce its load-carrying capac
-
ity.

Do not lie under the vehicle or start the
engine when the vehicle is supported by
the jack – risk of fatal injury. Observe the safety precautions regarding flat tires on page
125
.<
1. For vehicles with a space-saver spare
tire:

Place the folding chock behind the front
wheel on the other side of the vehicle;
on downward inclines, place it in front of
this wheel. If the wheel is changed on a
surface with a more severe slope, take
additional precautions to secure the
vehicle from rolling
2. Loosen the lug bolts by a half turn.

128
CHANGING TIRES Jacking up the vehicle 1. Place the jack at the jacking point closest
to the wheel.

The jack base must be perpendicular to
the surface beneath the jacking point
The vehicle jack is designed for changing wheels only. Do not
attempt to raise another vehicle model
with it or to raise any load of any kind. To
do so could cause accidents and personal
injury.<
2.
During jacking up, insert the jack head in the square recess of the jacking point
3. Jack the vehicle up until the wheel you
are changing is raised from the ground.Mounting a wheel1. Unscrew the lug bolts and remove the
wheel2. Remove accumulations of mud or dirt
from the mounting surfaces of the
wheel and hub. Clean the lug bolts3. Mount the new wheel4. Screw at least two lug bolts finger-tight
into opposite bolt holes 5. Screw in the remaining bolts
6. Tighten all the lug bolts firmly in a diag
-
onal pattern
7. Lower the vehicle8. Remove the jack.Tightening the lug bolts Tighten the lug bolts in a diagonal pattern.
As soon as possible, have the secure seating of the lug bolts, tightening
torque 88.5
lb ft / 120
Nm, checked using a
calibrated torque wrench. Otherwise, a
wheel coming loose can lead to a severe
accident.<
Replace the defective tire as soon as possi
-
ble and have the new wheel/tire assembly
balanced.

EVERYTHING FROM A TO Z
157
OVERVIEW REPAIRS OPERATION CONTROLS DATA INDEX
Technical modifications, refer
to For your own safety
7
Telephone call, refer to the Owner's Manual for the telephone

Temperature

air conditioning system
76
automatic climate control
79
Temperature display

ice warning
66
outside temperature
66
setting units
66
Temperature grades
100

Tempomat, refer to Cruise
control
61
Three-point safety belt
45
Through-loading system
85, 86
Tightening the lug bolts

keys
125
, 129

torque
128

Tightening torque, refer to
Tightening the lug bolts
128

Tire change set

MINI Mobility System
131

Run Flat tires
102

space-saver spare tire
125

Tire failure
125

MINI Mobility System
129

space-saver spare tire
125

Tire inflation pressure
97
reinflation
130

Tire pressure monitor, refer to
Flat Tire Monitor
71
Tire pressure monitoring, Flat
Tire Monitor
71
Tires

age
99
break-in procedures
92
changing
127

condition
100

damage
101

flat tire
101
, 125

inflation pressure
97
replacement
102

size, refer to New wheels and
tires
102

storage
103

tread
100

wear indicator, refer to Tire
tread
100

winter tires
103

Tires with emergency
properties, refer to Run Flat
tires
101

Tools, refer to Onboard tool
kit
120

Torque

engine
140

lug bolts
128

Tow bar
137

Tow rope
137

Tow socket for towing
eyelet
136

Towing
136

with automatic
transmission
136
, 137

Towing eyelet
136

Tow-starting
137

Track width, refer to
Dimensions
141
, 142

Traction grades
100

Transmission

Continuously Variable
automatic Transmission
(CVT)
54
manual transmission
53
Transmission lock, refer to
Range selection
54
Transmission malfunction,
refer to Malfunction
56
Transporting children safely
48
Transporting securely, refer to
Securing the load
88
Trap protection,

electric glass sunroof
34
Trash container, refer to
Ashtray
81
Tread depth, refer to Tire
tread
100

Treadwear grade
99
Trip odometer
63
Trunk, refer to Luggage
compartment in the MINI
85
Turn signal indicators
58
indicator lamp
19
Turn signal indicators on the
side, bulb replacement
123

Turning circle, refer to
Dimensions
141
, 142

U Uniform Tire Quality
Grading
99
Units

average consumption
67
average speed
67
temperature
66
Universal garage door
opener
83
Universal remote control
83
Unlocking

bonnet
105

from inside
28
from outside
26
Used batteries, refer to
Disposal
132

Using antifreeze
108
, 110

V Vacuum cleaner, connecting,
refer to Cigarette lighter
socket
82