Seat MITSUBISHI 3000GT 1995 2.G User Guide
[x] Cancel search | Manufacturer: MITSUBISHI, Model Year: 1995, Model line: 3000GT, Model: MITSUBISHI 3000GT 1995 2.GPages: 738, PDF Size: 35.06 MB
Page 212 of 738

Downloaded from www.Manualslib.com manuals search engine 210CIRCUIT DIAGRAMS - Buzzer Circuit
COMPONENT LOCATION
Buzzer
NameSymbol
Name
Symbold
CETACS unit
AII-!II
1 Diode (seat belt warning)b tI I
PlQFO134
TSB Revision
Page 213 of 738

Downloaded from www.Manualslib.com manuals search engine CIRCUIT DIAGRAMS - Buzzer Circuit211
OPERATION
L
lBattery positive voltage is continuously applied to the key-reminder switch.l
If the driver’s door is opened (door switch ON) with the key inserted in the ignition switch (key-reminderswitch ON), the buzzer sounds to warn that the key has been left in the switch.
&eat belt warning>
lWhen the ignition switch is turned on, the timer circuit and pulse circuit will flicker the seat belt warning
light for approx. 6 seconds with the buzzer intermittently sounding.
lIf the seat belt is fastened for the while, the seat belt switch will be turned off and the buzzer will
stop.
TROUBLESHOOTING HINTS
/
L
ProblemCheck methodThe key-reminder The seat belt warning function l
Check the door switch.
warningdoesn’t is OK.(Refer to GROUP 42-Door Assembly.)
sound.The seat belt warning also l Check the buzzer.
doesn’t function.(Refer to GROUP 52A-Seat Belt.)
The seat belt warn-The seat belt warning light lCheck the seat belt switch.
ing doesn’t
func- flashes.(Refer to GROUP 52A-Seat Belt.)
tion.The seat belt warning light l Check the key-reminder switch.
also does not function (and(Refer to GROUP M-Ignition Switch.)
the key-reminder warning
also does not function).
The buzzer doesn’t stop even through the driver’slCheck the seat belt switch.
seat belt has been buckled.(Refer to GROUP 52A-Seat Belt.)
The seat belt warning light doesn’t flashes (but thelCheck the light bulb.
buzzer sounds).lCheck the key-reminder switch.(Refer to GROUP 54-Ignition Switch.)
lCheck the seat belt switch.
(Refer to GROUP
52A-Seat Belt.)
The warning light does not flash and the warninglCheck the ignition switch input signal.buzzer also does not sound.(Refer to GROUP 52A-Troubleshooting.)l Check the key-reminder switch.
(Refer to GROUP 54-Ignition Switch.)
lCheck the seat belt switch.
(Refer to GROUP 52A-Seat Belt.)
The warning light flashes, but the warning buzzer l
Check the key-reminder switch.
does not sound.(Refer to GROUP M-Ignition Switch.)lCheck the seat belt switch.
(Refer to GROUP 52A-Seat Belt.)
[ TSB Revision
Page 219 of 738

Downloaded from www.Manualslib.com manuals search engine CIRCUIT DIAGRAMS - Power Window Circuit217
i
3REIGNISWI?
B-W2B-b
CHARGING
J/B
2B-W5W-Bl
HORN5W-B,1-i\ 1
L-l
*TENSION-REDUCER
TYPE SEAT BELT
L-Y1
B-WR-B
STORAGE
CONNECTOR
(A-11X)
51-------1
L-------------_---y_-_____
8:1.FOG LIGHT.HEADLIGHT1oz2
.TAILLIGHT,PARKING/SIDE
MARKER LIGHT AND LICENSER-GY-WPLATE LIGHT
'IY
\DOOR LIGHT AND/gG&GE COMPARTMENT
TT
(F)Y
R-G
R-G
3,4mR-G(F)Y
R-G
(E-15)1(E-21)1
IAI II
(F)R-E
14:'
B
R-B(F)R-B
R-B@zA&GHT AND
COMPARTMENT
LIGHT
.TAILLI
!%ER
GHl
L!i
',PARKING/SIDEGHT AND LICENSE:HTDATA LINK
CONNECTOR
(c-79).FOG LIGHT
Ii
.HEADLIGHT*DOME LIGHTSFOOT LIGHTAND IGNITION KEY
CYLINDER
NOTEILLUMINATION LIGHTxl:VEHICLES WITHOUT0 THEFT-ALARM SYSTEM:2:VEHICLES WITH THEFT-ALARM SYSTEM
3=
(RH)(LH) =
B-.L
DOOR SWITCH
(A-11X)-(c-65):'(c-65):2(c-68)
q
El1(c-70)m1234
HRllM02AB
1 TSB Revision
Page 221 of 738

Downloaded from www.Manualslib.com manuals search engine CIRCUIT DIAGRAMS - Power Window Circuit
219
POWER
WINDOWS
RELAYIGNITI
A
I
SWITCl
B-W2B-r,
L-'y'rCHARGING
J/B.TENSION-REDUCER
TYPE SEAT BELT
L-Y1
L-‘i
B-W
722
jzl (c-65)
(c-66)u
I
TIMER1CIRCUIT/1
\,
I(c-80) (c-77)“1(c-8:!
R-B
j251‘----------------------~
FOG LIGHT
HEADLIGHT
TAILLIGHT,PARKING/SIDE
MARKER LIGHT AND LICENSER-GY-WB-IPLATE LIGHT
IY
\DOOR LIGHT AND
LUGGAGE COMPARTMENT
LIGHT
1'
(F)Y
R-G
R-G
$2
s&gR-G(F>Y
R-G
(E-15),1/t(E-21)1 2 [
II /I
E(F)R-E
R-B
R-B(F>R-BI
tDOOR LIGHT
~X%@MENT
AND
LIGHT
DATA LINK
CONNECTOR
@gT2J
.TAILLIGHT,PARKING/SIDEMARKER LIGHT AND LICENSE
PLATE LIGHT
.FOG LIGHT6.HEADLIGHT.DOME LIGHTsFOOT LIGHTAND IGNITION KEYCYLINDERNOTEILLUMINATION LIGHTxl:VEHICLES WITHOUT0 THEFT-ALARM SYSTEM:2:VEHICLES WITH THEFT-ALARM SYSTEM
IODSTORAGE
CONNECTOR
(A-11X)
HRllMOGAB
TSB Revision
Page 239 of 738

Downloaded from www.Manualslib.com manuals search engine CIRCUIT DIAGRAMS - Central Door Locking Circuit237
OPERATION/
Li!
When the door lock switch is set to the LOCKside (or UNLOCK side), the LOCK side (or
UNLOCK side) of the door lock relay is turned
ON and the door actuators of all doors operate.l
If the driver seat side door (or assistant seat
side door) is opened and the driver seat side
inside lock knob (or assistant seat side inside
0
,’
id
0
With the driver’s and front passenger’s doorsunlocked, press the LOCK switch of the
transmitter, and the door lock signal output (0V) will be sent from the
keyless entry control
unit terminal No. 12 closing the door lock powerrelays 1 and 2 to lock the driver’s and front
passenger’s doors.
While the R.H. and L.H. doors are in the lockedstate, press the UNLOCK switch of the
transmitter once, and the DOOR UNLOCK
switch signal (0 V) will be sent from the keylessentry control unit terminal No. 14 closing the
door lock power relay 2 to unlock the driver’s
door.
Under the above-mentioned conditions, further
press the UNLOCK switch of the transmitter,and the DOOR UNLOCK signal output (0 V)
will be sent from the keyless entry control unitterminal No. 13 closing the door lock power
relay 1 to lock the front passenger’s door.
When the keyless entry system is operated toturn the driver’s door lock switch from the
UNLOCK position to the LOCK position, thelock knob) is locked with the key inserted in
the ignition switch, the ETACS unit grounds the
unlock side circuit of the door lock relay to unlock
all doors. This way, failure to remove the key
is prevented.dome light/foot light blinking signal output
(system voltage) will be sent twice from the
keyless entry control unit terminal No. 11 when
the door lock switch is turned from the LOCK
position to the UNLOCK position, the lighting
signal output (0 V) will be provided for approx.
3 seconds.
NOTE
The dome light winks or comes on when the domelight switch is in the DOOR interlock position.
However, the dome light does not wink while it .is
ON for 6 seconds after closing the door by ETACS
function.Besides the above-mentioned operations, the
keyless entry control unit has the following functions.l
If any door is not opened or closed within 30
seconds from unlocking the door by means ofthe
keyless entry system, the door is
automatically locked.In addition, if the
cryptographic code other than the code storedin the receiver memory is received 30 times
in one minute continuously, operation of the
unit is suspended for 10 minutes.l
Operation is also suspended if the ignition key
remains inserted (key reminder switch: OFF)
and either door is left open (door switch: ON).TROUBLESHOOTING HINTS
Phenomenon
Inspection method
One of the door lock actuators fails to operate.
0Check the door actuator which fails to operate.
No unlock operation can be made by pressing door lock0
knob after fulfilment of following conditions.Check the key reminder switch input signal.0Check the key reminder switch. (Refer to GROUP
0Insertion of key in ignition switch (key reminder switch54-Ignition Switch.)
OFF)0
0Opening of door (door switch ON)Check the front door switch input signal.0 Check the front door switch. (Refer to GROUP
42-Door Assembly)
TSB Revision
Page 418 of 738

Downloaded from www.Manualslib.com manuals search engine 416CIRCUIT DIAGRAMS - Power Seat Circuit
POWER SEAT CIRCUIT (UP TO 1993 MODELS)
IGNI'SWIT
2B-k
J/Br
0
15A
B-W
i-
G
2B
ON(IGl)E%B9Eb
2R-B
:k5 (c-01)
2R-B
R-B2R-B2R-B
7m,,l,,5
IA
-------__-___----------
32
LUMBAR SUPPORT
jg (c-66)
0
I2Y-G
1. 25L-R
SIDE SUPPORTMOTOR"MJJyi;R SUPPORT
aCD#;$HSEAT
(D-21)
POWER SEAT
ASSEMBLY
(E-27)
(c-01)(rn(c-65)(c-66)(c-80)(C-82)0(E-27)(1) cz-) c-T-1
~1~~~1~~~~~9 @
HR15M26AA
TSB Revision
Page 419 of 738

Downloaded from www.Manualslib.com manuals search engine CIRCUIT DIAGRAMS - Power Seat Circuit
2R,,14POWER SEAT SWITCH (
SLIDEIFRONT HEIGHTREAR HEIGHT
FRONT__ REARc _ REAR-t FRONT t ---------
I
SLIDE MOTORFRONTIUFiCUT Llr-II~IUILI mJTOR
,,5m/\,,4/\LIMIT SWITCH
/REAR
HEIGHT MOTOR
,,2cm,,l
LIMIT SWITCH
0OFF
OFF
0i*--ON
m”61.258
OFF
OFF
0i*-_ON
-;iBBI
2B
J/B
HR15M26AB
TSB Revision
Page 420 of 738

Downloaded from www.Manualslib.com manuals search engine 418CIRCUIT DIAGRAMS - Power Seat Circuit
POWER SEAT CIRCUIT (1994, 1995 MODELS)1I
\j i
CHARGING1.
2B-WR-B2R-B2R-B
70,l-5
J/B
r----/ Ivv
B
28
NOTE
0
:l:VEHICLES WITHOUTTHEFT ALARM SYSTEM:2:VEHICLES WITHTHEFT ALARM SYSTEM
I
. .
SIDE SUPPORT
LUMBAR SUPPORT
I IL’CLOSE- SPREADiRELEASE--h
‘G.2; 1.25G-R
I
4----
‘22 l. 25G-R
li’Z ‘i’g
32
I-i
1_ ---- ---___m
‘i’s ‘is;
121
u!z!lM
SIDELUMBAR
SUPPORT
MOTOR$JF@RT
m0
Kl:fEHSEAT
(D-21)
POWER SEAT
ASSEMBLY
(E-27)
HR15M27AA
1 TSB Revision
Page 421 of 738

Downloaded from www.Manualslib.com manuals search engine CIRCUIT DIAGRAMS - Power Seat Circuit419
H33CIWDL I
2R,,14POWER SEAT SWITCH (4)
SLIDEFRONT HEIGHT
REAR HEIGHT
FRONT__ REAR-3 FRONT*I- REAR-UP/-1_ DOWN
UPDOWN
UPNT- DOWN-c -.c _ DOWN-UP I-
-------- --
-------------------_,
LIMIT SWITCH
1.25B1.25B'l.25B
2B
. ,I4
2B9m
J/B
i
2B 5 (c-82)
6
(c-78)(c-82) (E-27) m-)cD5~cEDcm
~~~~1~@J@J@gjJ
ei
HR15M27AB
1 TSB Revision
Page 422 of 738

Downloaded from www.Manualslib.com manuals search engine 420
CIRCUIT DIAGRAMS - Power Seat Circuit
POWER SEAT CIRCUIT (FROM 1996 MODELS)
70
015A
t
30
B-W
__--- 52
J/B
- T32L-Bw
I
TV2L-BPOWER WINDOW
GNDV
.,I-----
l
57:10
5Qx2RF"
B
iL
2
t2B 2Y-\NI
'i'$
2--,,1,
'i'2
2$$l
POWER SEAT
ASSEMBLY(E-27)
1.25 1.25
G-RL-E
2B
!
NOTEXl:VEHICLES WITHOUTTHEFT ALARM SYSTEMZ2:VEHICLES WITH6THEFT ALARM SYSTEM:3:HATCHBACKX4:CONVERTIBLE
SIDE
LUMBAR
aRiRT&J;'RT
1'2)0L
HR15M38AA
TSB Revision