clock MITSUBISHI 3000GT 1995 2.G Workshop Manual

Downloaded from www.Manualslib.com manuals search engine CONFIGURATION DIAGRAMS - How to Read Configuration Diagram37
,lHOW TO READ CONFIGURATION DIAGRAM
id actual vehicles.
L
Denotes connector No.The same connector No. is used throughout the circuit dia-
grams to facilitate connector location searches. The first al-
phabetical symbol indicates the location site of the connector
and a number that follows in the unique number. Numbers areassigned to parts in clockwise order on the diagram.
Examole: A-l 2
/Number specific to connector (serial number)
Connector location site symbol
A: Engine compartment
B: Engine and transaxle
C: Dash panel
D: Instrument panel and floor consoleE: Interior
F: Luggage compartment
Denotes ground point.Same ground number is used throughout cir-cuit diagrams to facilitate search of ground
point. Refer to P.4 for details of ground points.
A-01X
A-02X
A-03X
A-04X
A-05X
A-06X
A-07X
A-08X
A-09X
A AL\,
$~~~;~.--.-.*/hhA, ”
L^---,.-I II-m 1 lta>.I
J
n-1°KA-11X
\
LI
ueriotes a sermon covereaby a corrugated tube.236F0122
A-01X Headlight relayA-18A-02X ABS power relayA-l 9ignition timing adjustment connector
Front washer motorA-03X Fog light relayA-20
A-04XRadiator fan motor relay(L0)A-21Evaporative emission purge solenoid
EGR solenoidA-05X Taillight relay
A-06X Horn relay
A-22(Vehicles for California)
A-07X Radiator fan motor relay (HI)EGR temperature sensor
A-09X Starter relayA-23(Vehicles for California)
No connection A-l OX Generator relayA-24Brake fluid level sensorA-11XIOD or Storage connectorA-25
A-12ABS front speed sensor (RH)A-26ECS front shock absorber (LH)
Theft-alarm horn
A-13Theft-alarm horn
A-14ECS front shock absorber (RH)A-27
Washer fluid level sensorA-28
Auto-cruise vacuum pump
TSB Revision

Downloaded from www.Manualslib.com manuals search engine 52CONFIGURATION DIAGRAMS - Dash Panel
JUNCTION BLOCK

C-68 C-69C-46
c-47
C-48c-49
c-50
c-51
C-52c-53
C-54c-55
C-56
c-57
C-58
36FOOOl

C-76
/
C-80
36FOOO3
Junction
/C-91*5 i
Av///I :-C-64
1 /:-8!C-63 C-63
C-61
( C-62
Turbo> ,
NOTE
[-I!1:: :1992 Up tomodels 1993 models
*s: From 1994 models
*4:1995models
(5)*5: From 1996 models
QC-58 C-57 C-60
ELC-4 AA control module
ELC-4 A/T control moduleELC-4
AiT control module*’Air conditioning control unit
Air conditioning control unit
Air conditioning control unit

Engine control module
Engine control module
Engine control moduleLeft bank heated oxygen sensor (front)

Theft-alarm starter relay
Clock spring
Key reminder switchc-59
C-60
C-61
C-62
C-63
C-64
C-65
C-66
C-67
C-68
C-69c-70
Ignition switch
Steering wheel angle speed sensor
Stop light switch
Stop light switch
Clutch pedal position switch (for auto-cruise
control circuit)
Clutch pedal position switch (for theft-alarm
circuit)
ETACS unit
ETACS unit
Foot light (LH)
Front wiring harness and junction block
combination
Front wiring harness and junction block
combination
Front wiring harness and junction block
combinationITSB Revision

Downloaded from www.Manualslib.com manuals search engine CIRCUIT DIAGRAMS - Sudemental Restraint System (SRS) Circuit377
IGNITIONSWITCH(IG1)
i
i
63
%
00-w10A15A
\,I
0“16(c-71)“6 '
0.85B-W0.85B-W0.85B-W
,,6
(D-44)
0.85B-R
I
.HEADLIGHT.FOG LIGHT
(D-25) 12.BACK-UP LIGHT------------------h-------------__---- ------- - ------- - ----- ---------------&4--nYuInIAnJ
TURN-SIGNAL
LIGHT AND
HAZARD LIGHT
a-
:3
CLOCKSPRINGr-l-
5
4
I,
CONNECTOR 1LOCK SWITCH
I
--_-
>
I(1
1DATA LINKCONNECTOR
DRIVER'S AIR;MU~f~ULE0
05
:,m
3.------
(c-82)
(c-15)(c-71)(c-77)-FRONT SIDE (c-82) (D-04)(D-05)
HRlSM18AB
TSB Revision

Downloaded from www.Manualslib.com manuals search engine 384CIRCUIT DIAGRAMS - Auto-cruise Control Cirkuit
AUTO-CRUISE CONTROL CIRCUIT (1994, 1995 MODELS)
NON TURBO (FEDERAL)
IGNITIONSWITCH(IG1)Ir ENGINE
1EEzL
GND
67 (F> 1, 25B MFI SYS^iEM 6 A
IOD ORSTORAGE
CONNECTOR
J(F>BR-R
O(c-83)
THROTTLEKIP;;~""
(B-05)
RADIO ANDTAPE PLAYERBR-R 13
t
Y-I
(c-29)
BR-R 5Y-i0
AUTO-CRUISE
CONTROL UNIT
(c-37)
GNDGNDGND
1 I
\L/ i
B-Y
,,2
B': - CLUTCHPEDAL,, POSITIONOF;-"ON SWITCH
B
B“1 (c-63j
B-W
$0
1
CLOCK
SPRING
tI
3
E
-8 rc
I
i:
c
B-W
I:!t
5
LLL!?k
grl
K?.. w
2E
HR15M20AA
1 TSB Revision

Downloaded from www.Manualslib.com manuals search engine 388CIRCUIT DIAGRAMS - Auto-cruise Control Circuit d/T>
AUTO-CRUISE CONTROL CIRCUIT (1994, 1995 MODELS)
TURBO, NON TURBO (CALIFORNIA)
GND
J/B &,3481 92(F>(F)G-Y 1.25B (Fly-1i18
l(F>B 4
,\
B7 (F)1,25B MFI i"'""
CONNECTOR
(F>BR-R
(c-83)
,
THROTTLEW;P;;ON
(B-05)
2L38
1’
LRADIO ANDTAPE PLAYER
20
BR-R 13
t
Y-l
(c-29)
BR-R5Y-l
AUTO-CRUISE
CONTROL UNIT
GNI:V)GG
I
I
1
I
I-
L
r;
--------I
B-h
.a
imB
1
CLOCK
SPRING
c
2
ll
d cL
i
;
-
3
B
B
14
I
1
B-Y
2
(A-11X)0(c-29)(c-30)0
~fzfas2J~5161718;19 )10~11~~1ej13/14~15(161171118/19
(c-7o)(c-82)0 (1
~%%Jp$i$q~HRlSh421AA
1 TSB Revision

Downloaded from www.Manualslib.com manuals search engine 400CIRCUIT DIAGRAMS - Auto-cruise Control Circuit c/VT>AUTO-CRUISE
CONTROL CIRCUIT (1993 MODELS)

IGNITIONSWITCH(IG1)
I
2L
.a
40
J/B(F>BR-F
@
IOD ORSTORAGE
CONNECTOR
-I
10 (c-83)
’ I
2(F) 3BR-R Y-R
--I
L
BR-R l3Y-f
(c-29)
BR-R5Y-I:
Jo
67
THROTTLE~;~B&ON
(8-05)
!O (c-37)
i-3
iAUTO-CRUISE'CONTROL UNIT
L
I--
I ?-+AGNDGND
GNDAV
18
-1
"6R
-------- 4 (c-57)B
B-W
CLOCK
SPRING
nV
I
I
B
3
I
14
B
2B
1
h
Y-B W-R
CONNECTORlXJ$XJ~;~iJISE
SWITCH
(1
(c-53)
(c-57)
HR15M23AA
TSB Revision

Downloaded from www.Manualslib.com manuals search engine 54-1
CHASSIS
ELECTRICAL
CONTENTS
AERO PARTS (ACTIVE AERO).....Refer to GROUP 51
ANTI-LOCK BRAKING SYSTEM....
Refer to GROUP 35
BATTERY...........................................-3
ON-VEHICLE SERVICE............................3
Battery Charging.................................4Battery Inspection................................3Battery Testing Procedure........................5
SPECIFICATIONS................................-3
General Specifications............................3
CIGARETTE LIGHTER.............................119
CIGARETTE LIGHTER..........................123
SPECIFICATIONS..............................
119
General Specifications............I...........119
TROUBLESHOOTING............................120
COLUMN SWITCH.................................
.lll
COLUMN SWITCH*............................112
SPECIAL TOOL.................................111
SPECIFICATIONS...............................111
General Specifications..........................111
CRUISE CONTROL SYSTEM . . . . . . . Refer to GROUP 17
DOOR GLASS AND REGULATOR
(POWER WINDOWS) . . . . . . . . . . . . . .Refer to GROUP 42
DOOR HANDLE AND LATCH
(CENTRAL DOOR LOCKING) . . . . . . Refer to GROUP 42
DOOR MIRROR (ELECTRONIC
CONTROLLED MIRROR). . . . . . . . . . .Refer to GROUP 51
ELECTRONIC CONTROL
SUSPENSION . . . . . . . . . . . . . . . . . . . . Refer to GROUP
338
FRONT SEAT (POWER SEAT) . . . . Refer to GROUP 52A
HEATER AND AIR CONDITIONING . Refer to GROUP 55
HORN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
115
HORN SWITCH* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118
RELAY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
118
SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
115
General Specifications . . . . . . . . . . . . . . . . . . . . . . . .115
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . .115
KEYLESS ENTRY SYSTEM
(CENTRAL DOOR LOCKING) . . . . . . Refer to GROUP 42
CONTINUED ON NEXT PAGE
WARNINGS REGARDING SERVICING OF SUPPLEMENTAL RESTRAINT SYSTEM (SRS) EQUIPPED VEHICLES
WARNING!
(1) Improper service or maintenance of any component of the
SRS, or any SRS-related component, can lead to personal
injury or death to service personnel (from inadvertent firing of the air bag) or to the driver and passenger (from render-
ing the SRS inoperative).
(2) Service or maintenance of any SRS component or
SRS-related component must be performed only at an authorized
MITSUBISHI dealer.
(3)MITSUBISHI dealer personnel must thoroughly review this manual, and especially its GROUP 52B
TSupplemental Re-
straint System (SRS) and GROUP 00 -Maintenance Service before beginning any service or maintenance of any com-
ponent of the SRS or any
SRS-related component.
NOTE
The SRS includes the following components: impact sensors, SRS diagnosis unit, SRS warning light, air bag module, clock spring
and interconnecting wiring. Other SRS-related components (that may
h,a”” to be removed/installed in connection with SRS serviceor maintenance) are indicated in the table of contents by an asterisk ( ).

Downloaded from www.Manualslib.com manuals search engine 54-6CHASSIS ELECTRICAL - Ignition Switch
IGNITION SWITCHSPECIAL
TOOL
ToolTool number and nameSupersessionApplication
MB990803
Steering wheel pullerGeneral service toolRemoval of steering wheel
IGNITION SWITCHREMOVAL AND INSTALLATION
40 Nm29 ft.lbs.6 Nm
6
Steering lock cylinder removalsteps
Ignition switch segment removalsteps
1. Air bag module (Refer to GROUP 52B
4Ab
- Air Bag Module and Clock Spring.)3. Knee protector
2. Steering wheel(Refer to GROUP 52A - Instrument
3. Knee protector
Panel.)
LRedE;)to GROUP 52A - Instrument:i:4. Column cover, lower
5. Column cover, upper
:::4. Column cover, lower6. Lap cooler duct and foot shower duct
5. Column cover, upper10. Key reminder switch segment
6. Lap cooler duct and foot shower duct11. Ignition switch segment
,A+ 7. Column switch and clock springassembly
NW
8. Ignition key illumination ring
9. Steering lock cylinder
TSB Revision

Downloaded from www.Manualslib.com manuals search engine CHASSIS ELECTRICAL - Ignition Switch54-7REMOVAL SERVICE POINTS
+A, STEERING WHEEL REMOVAL
Remove the steering wheel by using the special tool.
Caution
Do not hammer on the steering wheel to remove it;
doing so may damage the collapsible mechanism.
Front of vehicles
219FO12:
+B,COLUMN COVER LOWER / COLUMN COVER
UPPER REMOVAL
After the screws have been removed, remove the covers,while making sure not to break the grippers.
+C, STEERING LOCK CYLINDER REMOVAL
(1) Insert the ignition key into the steering lock cylinderand place the key in the ACC position.
(2)Press the lock pin down with a Phillips head screwdriv-
er (small-size one) to remove the steering lock cylinder.INSTALLATION SERVICE POINT
.A+COLUMN SWITCH AND CLOCK SPRING
ASSEMBLY INSTALLATIONLine up the “NEUTRAL” mark of the clock spring with
the mating mark to center the clock spring.
CautionIf the clock spring is not centered, problems such
as intermediate failure of the steering wheel to turn,broken ribbon cable in the clock spring, or the like
could occur. As a result, they might hinder proper
operation of the SRS, resulting in serious injury.
iI
1 TSB RevisionI

Downloaded from www.Manualslib.com manuals search engine CHASSIS ELECTRICAL - Lighting System
Up to 1993 modelsFrom 1994 mod&
__ _..--.
Vertical center lineZ16FO509
JHot
z&ky M-j’ Within~ Within600mm1mm (in.)600 mm
(23.6)
(23.6)
Note l ’ Up to 1993 modelsl 2 From 1994 models
1 Etomj
0000236600002387
LUMINOUS INTENSITY MEASUREMENT
Measure the luminous intensity of headlights with a photo-me-ter in accordance with the instruction manual prepared by
the manufacturer of the photometer and make sure that the
luminous intensity is within the following limit.Limit: 20,000 cd or more
NOTE
(1) When measuring the luminous intensity of headlight, keepthe engine at 2,000 rpm and have the battery charged.
(2) If there are specific regulations for luminous intensity ofheadlights in the region where the vehicle is operated,
make sure that the intensity conforms to the requirements
of such regulations.
FOG LIGHT AIMING
1.Place vehicle on a known level floor 7.6 m (25 feet) from
aiming screen or light colored wall.
2. Use adjusting screw to adjust the top end of high intensity
zone to dimension A.
BULB REPLACEMENT
1. Disconnect the connector.
2. Turn the bulb socket counterclockwise to pull it out.
Caution
Do not touch the surface of the headlight bulb with handsor dirty gloves. If the surface dies become dirty, clean
it with alcohol or thinner, and let it dry thoroughly before
installing.
TSB Revision