belt MITSUBISHI 3000GT 1996 2.G User Guide
[x] Cancel search | Manufacturer: MITSUBISHI, Model Year: 1996, Model line: 3000GT, Model: MITSUBISHI 3000GT 1996 2.GPages: 738, PDF Size: 35.06 MB
Page 212 of 738
Downloaded from www.Manualslib.com manuals search engine 210CIRCUIT DIAGRAMS - Buzzer Circuit
COMPONENT LOCATION
Buzzer
NameSymbol
Name
Symbold
CETACS unit
AII-!II
1 Diode (seat belt warning)b tI I
PlQFO134
TSB Revision
Page 213 of 738
Downloaded from www.Manualslib.com manuals search engine CIRCUIT DIAGRAMS - Buzzer Circuit211
OPERATION
L
lBattery positive voltage is continuously applied to the key-reminder switch.l
If the driver’s door is opened (door switch ON) with the key inserted in the ignition switch (key-reminderswitch ON), the buzzer sounds to warn that the key has been left in the switch.
&eat belt warning>
lWhen the ignition switch is turned on, the timer circuit and pulse circuit will flicker the seat belt warning
light for approx. 6 seconds with the buzzer intermittently sounding.
lIf the seat belt is fastened for the while, the seat belt switch will be turned off and the buzzer will
stop.
TROUBLESHOOTING HINTS
/
L
ProblemCheck methodThe key-reminder The seat belt warning function l
Check the door switch.
warningdoesn’t is OK.(Refer to GROUP 42-Door Assembly.)
sound.The seat belt warning also l Check the buzzer.
doesn’t function.(Refer to GROUP 52A-Seat Belt.)
The seat belt warn-The seat belt warning light lCheck the seat belt switch.
ing doesn’t
func- flashes.(Refer to GROUP 52A-Seat Belt.)
tion.The seat belt warning light l Check the key-reminder switch.
also does not function (and(Refer to GROUP M-Ignition Switch.)
the key-reminder warning
also does not function).
The buzzer doesn’t stop even through the driver’slCheck the seat belt switch.
seat belt has been buckled.(Refer to GROUP 52A-Seat Belt.)
The seat belt warning light doesn’t flashes (but thelCheck the light bulb.
buzzer sounds).lCheck the key-reminder switch.(Refer to GROUP 54-Ignition Switch.)
lCheck the seat belt switch.
(Refer to GROUP
52A-Seat Belt.)
The warning light does not flash and the warninglCheck the ignition switch input signal.buzzer also does not sound.(Refer to GROUP 52A-Troubleshooting.)l Check the key-reminder switch.
(Refer to GROUP 54-Ignition Switch.)
lCheck the seat belt switch.
(Refer to GROUP 52A-Seat Belt.)
The warning light flashes, but the warning buzzer l
Check the key-reminder switch.
does not sound.(Refer to GROUP M-Ignition Switch.)lCheck the seat belt switch.
(Refer to GROUP 52A-Seat Belt.)
[ TSB Revision
Page 219 of 738
Downloaded from www.Manualslib.com manuals search engine CIRCUIT DIAGRAMS - Power Window Circuit217
i
3REIGNISWI?
B-W2B-b
CHARGING
J/B
2B-W5W-Bl
HORN5W-B,1-i\ 1
L-l
*TENSION-REDUCER
TYPE SEAT BELT
L-Y1
B-WR-B
STORAGE
CONNECTOR
(A-11X)
51-------1
L-------------_---y_-_____
8:1.FOG LIGHT.HEADLIGHT1oz2
.TAILLIGHT,PARKING/SIDE
MARKER LIGHT AND LICENSER-GY-WPLATE LIGHT
'IY
\DOOR LIGHT AND/gG&GE COMPARTMENT
TT
(F)Y
R-G
R-G
3,4mR-G(F)Y
R-G
(E-15)1(E-21)1
IAI II
(F)R-E
14:'
B
R-B(F)R-B
R-B@zA&GHT AND
COMPARTMENT
LIGHT
.TAILLI
!%ER
GHl
L!i
',PARKING/SIDEGHT AND LICENSE:HTDATA LINK
CONNECTOR
(c-79).FOG LIGHT
Ii
.HEADLIGHT*DOME LIGHTSFOOT LIGHTAND IGNITION KEY
CYLINDER
NOTEILLUMINATION LIGHTxl:VEHICLES WITHOUT0 THEFT-ALARM SYSTEM:2:VEHICLES WITH THEFT-ALARM SYSTEM
3=
(RH)(LH) =
B-.L
DOOR SWITCH
(A-11X)-(c-65):'(c-65):2(c-68)
q
El1(c-70)m1234
HRllM02AB
1 TSB Revision
Page 221 of 738
Downloaded from www.Manualslib.com manuals search engine CIRCUIT DIAGRAMS - Power Window Circuit
219
POWER
WINDOWS
RELAYIGNITI
A
I
SWITCl
B-W2B-r,
L-'y'rCHARGING
J/B.TENSION-REDUCER
TYPE SEAT BELT
L-Y1
L-‘i
B-W
722
jzl (c-65)
(c-66)u
I
TIMER1CIRCUIT/1
\,
I(c-80) (c-77)“1(c-8:!
R-B
j251‘----------------------~
FOG LIGHT
HEADLIGHT
TAILLIGHT,PARKING/SIDE
MARKER LIGHT AND LICENSER-GY-WB-IPLATE LIGHT
IY
\DOOR LIGHT AND
LUGGAGE COMPARTMENT
LIGHT
1'
(F)Y
R-G
R-G
$2
s&gR-G(F>Y
R-G
(E-15),1/t(E-21)1 2 [
II /I
E(F)R-E
R-B
R-B(F>R-BI
tDOOR LIGHT
~X%@MENT
AND
LIGHT
DATA LINK
CONNECTOR
@gT2J
.TAILLIGHT,PARKING/SIDEMARKER LIGHT AND LICENSE
PLATE LIGHT
.FOG LIGHT6.HEADLIGHT.DOME LIGHTsFOOT LIGHTAND IGNITION KEYCYLINDERNOTEILLUMINATION LIGHTxl:VEHICLES WITHOUT0 THEFT-ALARM SYSTEM:2:VEHICLES WITH THEFT-ALARM SYSTEM
IODSTORAGE
CONNECTOR
(A-11X)
HRllMOGAB
TSB Revision
Page 425 of 738
Downloaded from www.Manualslib.com manuals search engine CIRCUIT DIAGRAMS - Tension-reducer Type Seat Belt Circuit423TENSION-REDUCER TYPE
SEAT BELT CIRCUIT
L (UP TO 1994 MODELS)
IN:IGl)FUSIBLE LINK@I2W-E
16:3
6315A
B-A(F)R-E
il12_----_.
TIMER
CIRCUIT
I
R-B 40
R
r-----
I
FRONT SEATBELT SWITCH(RH)
(E-24)
IOD OR
STORAGE
CONNECTOR
(A-11X)R-B
FRONT SEATWE; SOLEMf
(E-(E-20)
i(c-34)
IV
. ,. ,IIm+ I
-----1i4
):3,:4
L---------__--_-- -----14:1
4mY-W1R-G0
R-GR-G Y,,l,,l ,,2
(E-15)(E-21)
:l:VEHICLES WITHOUTTHEFT-ALARM SYSTEM:2:VEHICLES WITH--THEFT-ALARM SYSTEM:3:FROM 1994 MODELS(RH:(LH;:4:UP TO 1993 MODELS \I*
8:10:2
---------------57:1
59 2B
h
2BB B
4x35:3
B-L
DOOR SWITCH
m170(c-65) :1(c-65) :2
~~'~~1
(c-79):3
FRONT SIDE(c-66)
:1 (c-66) :2cm~c-70) (c-77)
(c-82)0(Fmj (E-15) (E-20) cm-2 (E-24)
HRlSM28AA
li
1 TSB Revision
Page 426 of 738
Downloaded from www.Manualslib.com manuals search engine 424
CIRCUIT DIAGRAMS - Tension-reducer Type Seat Belt Circuit
TENSION-REDUCER TYPE SEAT BELT CIRCUITI
(FROM 1995 MODELS)
&Ij
FUSIBLE LINK@IGNISWIT
2W-BB-W2B-
HORN5W-BCHARGING2B-
,.l (c-68)
J/B/\
a3r---10A10A
VV\I
"4 (c-80)------1"2 (c-70)
R-BRR-YI0,,l,,2
R-B
I“------I
7R-B.---
R-B,,2,,l
FRONT SEATI1BELT SWITCH(RH)OFF 'TON
71
!E-24)
(LH) p"-
(E-26) oFFI(
IIIR-L1
I
I1-YI
L------+l 1 (c-34)
POWERWINDOW L-yA
IOD ORSTORAGE
CONNECTOR
(A-11X)(F)R-B
HEADLIGHT
FOG LIGHT
TAILLIGHT.PARKING/
SIDE MARKER LIGHT
tYeH$ICENSE PLATE
11 (c-83)
R-EB-'
B-'
TICIN'CH(IGl)
blD
d
B-W
1
RADIO AND
TAPE PLAYER
HR15M29AA
TSB Revision
Page 427 of 738
Downloaded from www.Manualslib.com manuals search engine CIRCUIT DIAGRAMS - Tension-reducer Type Seat Belt Circuit425
id
J/B;EATILENOIDi7‘
MULTI.BFUSEC7
B-\
LJRPOSE)J/B
R-B
52 R-E
3-------------------
i7%1
/
iJR-G
$l$A&GHT AND
COMPARTMENT LIGHT
R-G1 \
R-Gr
Q(c-34)
R-G
R-G
Y-h-E
iEgAk;GHT AND
OMPARTMENT LIGHT
BUZZER
I
(F)Y
r
B
I
. TAILLIGHT.PARKING/SIDE MARKER
LIGHT AND
EjgfiFSE PLATE 2EB-L
5
I. FOG LIGHTHEADLIGHT
Iy
-
(RH<(LH;NOTE:l:VEHICLES WITHOUTTHEFT-ALARM SYSTEM =
DOOR SWITCH:E:VEHICLES WITHTHEFT-ALARM SYSTEMIs-
(c-34)(c-65) $1m :2(c-66) :1 (c-66):2OFRONT SIDE (E-15) (E-21)
HRl5M29AB
1 TSB Revision
Page 428 of 738
Downloaded from www.Manualslib.com manuals search engine CIRCUIT DIAGRAMS - Tension-reducer TvDe Seat Belt Circuit
COMPONENT LOCATION
00002663F19FO134
Note:* indicates that this componentis used on the right side as well.
It3Y16FO354
lock
D&a linkconnectdrT Ii lJ4
\?&-+-kOOl,
D
<
7&
/ ’
/
J-/
/ c
GL
l-
4
Front seafbelt solenoid(inside the retractor)Z16FO465
1 TSB Revision
Page 429 of 738
Downloaded from www.Manualslib.com manuals search engine CIRCUIT DIAGRAMS - Tension-reducer Type Seat Belt Circuit427OPERATION
L0If the driver fastens the seat belt with the ignition switch placed in the “ON” position, the seat belt
switch in the seat belt buckle is turned “ON” to operate the seat belt solenoid in the retractor.
0This will reduce the seat belt rewinding torqe to minimize a sense of oppression given by the belt.
lOwing to the timer function of the ETACS unit, the seat belt solenoid is kept in operation for 30 seconds
after turning off the ignition switch, with due consideration to elimination of the sudden rise in a senseof oppression caused by the belt immediately after the ignition switch is turned off.
TROUBLESHOOTING HINTS
PhenomenonInspection method
Some of the tension-reducers do not operates.0Check dedicated fuse No. 1 and 19.
0Check the inoperative seat belt switch.
lCheck the inoperative seat belt solenoid.
The tension-reducer does not operate with the ignition
0Check the ignition switch input signal.
switch placed in the ON position.
0 Check the ignition switch. (Refer to GROUP
M-Ignition switch.)
The tension-reducer is in operation immediately after the0Check the door switch input signal.
ignition switch is turned off, but it does not stop operationlCheck the door switch. (Refer to GROUP 42-Door
even if the door is opened within 30 seconds from theAssembly.)
turning-off the ignition switch.
TSB Revision
I
Page 452 of 738
Downloaded from www.Manualslib.com manuals search engine 16-6ENGINE ELECTRICAL - Charging System
ON-VEHICLE SERVICEGENERATOR OUTPUT LINE VOLTAGE DROP TEST
+I I.=-@=
Voltmeter
This test determines whether the wiring from thegenerator
“B” terminal to the battery (+) terminal
(including the fusible link) is in a good condition
or not.(1) Always be sure to check the following before
the test.l Generator installation
l Generator drive belt tension (Refer to
GROUP 00 - Maintenance Service.)l Fusible link
l Abnormal noise from the generator while
the engine is running
(2) Turn the ignition switch to the OFF position.
(3) Disconnect the negative battery cable.
(4) Disconnect the generator output wire from the
generator
‘73” terminal and connect a DC testammeter with a range of 0
- 100 A in series
between the “B” terminal and the disconnected
output wire. (Connect the
(+) lead of the amme-ter to the
‘73” terminal, and then connect the
Battery
6EN0962(-) lead of the ammeter to the disconnected
output wire.)
NOTE
A clamp-type ammeter which enables measure-
ments to be taken without disconnecting thegenerator output wire is recommended. The
reason for this is if a vehicle in which the voltage
may have dropped due to an imperfect connec-tion at the generator
“B” terminal is being in-
spected, and the generator “B” terminal is loos-
ened when the test ammeter is connected, the
connection will be completed at this time andthe possibility of finding problems will be re-
duced.
(5) Connect a digital-type voltmeter between thegenerator
“B” terminal and the battery (+)
terminal. (Connect the (+) lead of the voltmeterto the “B” terminal, and then connect the
(-)
lead of the voltmeter to the battery (+) cable.)
’
1 TSB Revision