turn signal MITSUBISHI COLT 2006 Service Owner's Manual
[x] Cancel search | Manufacturer: MITSUBISHI, Model Year: 2006, Model line: COLT, Model: MITSUBISHI COLT 2006Pages: 364, PDF Size: 11.65 MB
Page 283 of 364

ECU FUNCTIONS AND CONTROLS IN THE SWS
SMART WIRING SYSTEM (SWS)54B-17
LOW SPEED WIPER AND HIGH SPEED WIPER CONTROL
AC005437AB
ON
OFF
ON
OFF
ON
OFF
(HI) ON
Windshield low speed
wiper switch
Windshield high speed
wiper switch
Windshield wiper auto-stop
signal
ON
OFF
Windshield wiper
drive signal
Windshield wiper speed
switching relay
(LO) OFF
Low speed operations High speed operations
When the windshie l d low spee d wiper switch of th e
colu
mn switch is turned ON while the ignition switch
is ACC or ON, the colu
mn switch turns ON the wind
-
shield wip e r drive signa l. Also, the wiper speed
switching relay turns to OFF (LO), and the windshield
wiper op
erates at the low speed.
When the windshie l d high speed wiper switch is
turned
ON, the windshield wiper drive signal turns
ON. Also, the
wiper speed switching relay turn s ON
(HI),
and th e windshie l d wip e r opera t es a t the h i gh
spee
d.
Page 284 of 364

ECU FUNCTIONS AND CONTROLS IN THE SWS
SMART WIRING SYSTEM (SWS)54B-18
WINDSHIELD WIPER LINKED WITH WASHER FUNCTION (INITIAL CONDITION: WITH
THE WINDSHIELD WIPER LINKED WITH WASHER FUNCTION)
AC309988AC
t
t
T T
ON
OFF
ON
OFF
ON
OFF ON
OFF
Windshield wiper
auto stop signal Windshield washer relay Windshield washer switch
Windshield wiper relay
Wiper switch in
off positionWiper switch in intermittent
operation position
t: 0.2 or 0.3 second
T: Intermittent wiper intermittent time
Wiper
switchOFF positionIntermittent operation positionLow-speed or
high-speed
operation
position
Washer
switch ON
time (t)0.3
second or
less0.3 to 0.5
second0.5
second or
more0.2
seconds
or less0.2 to 0.4
second0.4 to 0.6
second0.6
second or
more−
T0 second2 seconds3 seconds0 second1 second2 seconds3 seconds3 seconds
When th e windshie l d washer switch in the column
switch is turned
ON with the ignition switch in th e
ACC or ON positio
n, the ET ACS-ECU turn s ON the
windsh
i eld washe r rela y .
When the windshie l d washer switch is kept ON for
0.3 secon
d s, th e windshie l d wip e r drive signa l (the
wiper drive sign
al ou tput time varie s de pending on
the condit
i ons. For d e t a ils, refer t o the t ables) is
turned ON, and
the win d shield wiper is ope rated a t
high
spee d. Three seconds af ter turn ing OFF th e
windshie
l d wa sh er switch, th e win d sh ield wip e r tu rns
OFF
.
Even when the win d shield wa sher switch is turne d
ON while the windsh
i eld wiper is o perating in termit
-
tently, the intermittent action is ke pt af ter th e linked
operation is finished.
If the igniti on switch is se t to the ACC position while
t
h e wind shie ld wa sher swit ch i s be ing tu rn ed ON, t he
windshield washe
r rela y becomes ON, but th e wind
-
shield wipe r doe s not st art the lin ked operation.
When th
e windshie l d washer switch is t u rned OFF
and the
n ON a gain , the win d shield wiper make s the
linked o
peration.
NOTE: .
•Using a cust omisation fun c tion, the driver ca n
en
ab le or dis abl e th e wi nd shi e ld wi per lin ked wit h
washer functio
n . For more information about the
customisatio
n featu r e, refer to
P.54B-25.
•When the windsh i eld wiper linked with washe r
fun
c tio n is disabled by the customisa t ion feature ,
the
windshield wiper does not op erate in synch r o
-
nization with the win d shield wa sher . However ,
the
windshield wash er ca n be activated. It is use
-
ful to melt do wn the ices of th e frozen wind shield.
Page 285 of 364
![MITSUBISHI COLT 2006 Service Owners Manual
ECU FUNCTIONS AND CONTROLS IN THE SWS
SMART WIRING SYSTEM (SWS)54B-19
REAR WIPER AND WASHER
REAR WIPER CONTROL [THE INITIAL CONDITION: 8 SECONDS (WITHOUT SUCCES-
SIVE OPERATIONS)]
AC207474AB
t
ON
OFF MITSUBISHI COLT 2006 Service Owners Manual
ECU FUNCTIONS AND CONTROLS IN THE SWS
SMART WIRING SYSTEM (SWS)54B-19
REAR WIPER AND WASHER
REAR WIPER CONTROL [THE INITIAL CONDITION: 8 SECONDS (WITHOUT SUCCES-
SIVE OPERATIONS)]
AC207474AB
t
ON
OFF](/img/19/57093/w960_57093-284.png)
ECU FUNCTIONS AND CONTROLS IN THE SWS
SMART WIRING SYSTEM (SWS)54B-19
REAR WIPER AND WASHER
REAR WIPER CONTROL [THE INITIAL CONDITION: 8 SECONDS (WITHOUT SUCCES-
SIVE OPERATIONS)]
AC207474AB
t
ON
OFF
ON
OFF
ON
OFF T2
T3
T2
T3
T1 T4
T4
T1 T4
T4 T4
T3
T2 T2T2
T2: 7.4 seconds
Rear wiper drive signal Rear wiper switch
Inhibitor switch "R" position
T1: 3.0 seconds
t: 1.0 second
T3: 8.0 seconds
T4: 0.6 second
1. Whe n the rear wipe r switch on the colu mn switch
is turne d ON wit h the ignit i on switch at the ACC
or ON positio n, ET ACS-ECU turns ON the rear
wipe r drive signal for 3 se conds (ap p roximat e ly 2
ope ration s) an d perfo rms the in termittent action
at 8 - second intervals.
When th e se lect or lever is moved to R position dur-
ing the rear wipe r ope ratio n , t he inh i bitor swit ch R
position turn
s ON one seco nd af ter th at,
ET
ACS - ECU se nd s th e re ar wipe r d r ive sign al f o r
3 seco
nds (approximately 2 op eratio ns), a nd
ope
rates the intermittent action in 8 secon d s
in
terva l .
2.By t he sp ecial op eration of th e rear wiper switch
on the column switch (successive 2-time opera
-
tions), the rea r wiper op erates co ntinu ously
rega
rdless o f the set intermittent time .
NOTE: The rear wipe r inte rmit tent time can b e
a
d
just
ed o r ca ncelled fo r con t inu ous o peratio n by the
customise f unction (Refe r to
P.54B-25).
Page 287 of 364

ECU FUNCTIONS AND CONTROLS IN THE SWS
SMART WIRING SYSTEM (SWS)54B-21
NOTE: Whether the door mirrors are at the unfolding
or folding position is determined according to the
memory of the door mirror fold relay operated previ
-
ously. For this reason, if the door mirrors are manu-
ally retracted, they may not move when the
unfolding/folding switch on the fold switch remote
controlled mirror switch is pressed next time.
AUTOMATIC UNFOLDING FUNCTION1.
AC207002AB
ON
OFF ON
OFF ON
OFF ON
OFF
T
T
Ignition switch 30 km/h
0 km/h
Unfolding Folding
Vehicle speed
Remote controlled mirror switch
(folding/unfolding switch)
Door mirror position Door mirror unfold relay
Door mirror fold relay
T : 16 seconds
Ve hicle speed-d epend ent au tomat i c u n fold ing func-
tion
When th e ve hicle speed re ache s 30 km/h, with the
ig nition switch ON and the mirrors retracted,
ET ACS-ECU turns on the retraction mirror relay
(unf olding) for 16 se cond s to return th e door mir
-
rors. However, the door mirrors do not return to
the
i r normal p o sitions auto m atically if the ignition
switch is tu
rned fro m OFF to ON, and then th e
unf
olding/folding switch on the remote contro lled
mirror switch
is operate d .
NOTE: Whe t her the door mirrors are at th e unfo l din g
or fold
ing p o sition is d e termined accordin g to th e
memory o f the re traction mirror re lay operat ed previ
-
ously. For th is re ason , if t he mirrors are manually
retract
ed, the y may n o t mo ve when the u n fold
-
ing/folding switch is pre s sed next time.
FLASHER TIMER FUNCTION
TURN-SIGNAL LAMP (I NITIAL SETTING:
TURN SIGNAL LAMP CAN BE OPERA
T ED
W
H EN THE IGNITION SW ITCH IS IN THE
ON POSITION)
AC101508
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
Ignition
switch (IG)
Turn-signal lamp
switch RH
Turn-signal lamp
switch LH
Turn-signal lamp
output RH
Turn-signal lamp
output LH
AC
When th
e turn-sign a l lamp switch is ON (LH o r RH)
with the
ignition switch is ON, t he turn -sig nal lamp
output
(flash signal) is turned ON.
If the lamp bulb of the front o r rear turn -sig nal lamp
has burned out, the flashing speed beco
m es faster to
alert t
he driver th at the lamp bulb has burne d out.
NOTE: Using a cust omisation fun c tio n , this fu nction
beco
m
es ava ilab l e even whe n the ignit i on switch is
in the
ACC po sit i on. F o r mo re info rmation ab out th e
customisation fe ature, re fer to
P.54B-25.
Page 288 of 364

ECU FUNCTIONS AND CONTROLS IN THE SWS
SMART WIRING SYSTEM (SWS)54B-22
HAZARD LAMP
AC101509
ON
OFF
ON
OFF
ON
OFF
Hazard lamp
switch
Turn signal
lamp output
RH
Turn signal
lamp output
LH
AC
When th
e hazard lamp switch inp u t signal turning
from OFF
to ON is dete c te d, the fla s h i ng st a t es tu rns
over b
y the signal (When th e hazard lamp is n o t
blin
kin g , it b lin ks. If it is b linking , it tu rns o f f).
NOTE: .
1.The push -return switch is adop ted for t he hazard
la mp switch .
2. Even if th e lamp bulb has burn ed o u t, the fla s hing
sp eed o f the ha zard lamp is not chang ed.
TURN-SIGNAL LAMP INDICAT O R
The ETACS-ECU sen d s th e turn sign al lamp indica-
tor ON sig nal to the combin ation mete r throu gh CAN
communicat
i on in synchronization with the turn sig
-
nal lamp operat ion. T he co mbination me ter receives
the tran
smitted sig nal a nd turns ON o r OFF the
turn-signal lamp indicator
.
HEADLAMP
HIGH-BEAM INDICA T O R
The ETACS-ECU sends th e high be am in dica tor ON
sig
nal to the comb ination meter th rough CAN co m
-
munication in synchr onizatio n with t he high bea m
headlamp
operation. T he co mbinatio n me ter
receives the
transmit t ed signa l and turns ON o r OF F
the high be
am indicator .
FOG LAMP
FOG LAMP CONTROL
AC401793AB
OFFON
(Extinguished) OFF (Illuminated) ON
(Extinguished) OFF (Illuminated) ON Tail lamp
Headlamp
OFF
Fog lamp switch Lighting switch
Headlamp
Tail lamp
(Extinguished) OFF(Illuminated) ON
Fog lamp output
When th e fog lamp switch is turn ed to ON with th e
t
a il lamp o r the h eadla m p lit (th e t a il lamp switch or
the hea
dlamp switch is ON), the fog lamp relay turns
ON, and
the fo g lamp s turn on.
If the ta il la mp or the he adlamp is turn ed of f with th e
ligh
t ing switch OF F while the fo g lamp s lit, the fog
lamp
s turn o f f the same time to prevent una ttende d
operation.
FOG LAMP INDICAT O R
The ETACS-ECU sen d s th e fog lamp indicat o r ON
sig
nal to the comb ination meter th rough CAN co m
-
munication in synchr onizatio n with t he fog lamp
operation.
The comb ination meter receives the trans
-
mitted signal and t u rns ON or OFF the fog lamp indi-
cator.
Page 290 of 364

ECU FUNCTIONS AND CONTROLS IN THE SWS
SMART WIRING SYSTEM (SWS)54B-24
IGNITION KEY CYLINDER ILLUMINATION LAMP CONTROL FUNCTION
AC314095
t: 30 seconds
(Closed) OFF
(Opened) ON ON
OFF
(Key removed) ON
(Key inserted) OFF
(Illuminated) ON
(Extinguished) OFF
Driver's seat door switch Key reminder switch
Ignition key cylinder
illumination lamp Ignition switch (IG)
tt ttt tt
AB
The ETACS-ECU con t rols the ignition key cylinde r
illuminatio
n lamp an d foot lamp as d e scribe d below .
1. T he ig nit i o n key cy lin de r ill umi n a t io n la mp an d fo r
30 seconds wh en the driver's d oor is
ope ned/closed with the ignition switch OFF .
2.Also when t he ig nition ke y is remove d from the
ig nition ke y cylinder , the lamp illuminates for 30
se cond s.
3.Whe n the ignit i on key cylind e r illumination lamp
is oper ating with the doors closed , it g oes o u t if
the ignition switch is turne d ON.
DOOR-AJAR INDICAT O R
The ETACS-ECU sen d s th e open /close st atus of
each
door to the comb ination meter th rough CAN
communicat
i on. The comb ination meter receives the
transmitte
d signal and t u rns ON and OFF t he
door-ajar in
dicator . Th e door-a jar indicator f l ashes
wh
en the door-ajar warning fun c tio n is activat ed
wh
ile the doo r-ajar indicato r is ON (For more infor
-
mation about the door-ajar warning fun c tio n , refe r to
).
Page 291 of 364

CUSTOMISE FUNCTION
SMART WIRING SYSTEM (SWS)54B-25
CUSTOMISE FUNCTION
M2541006000243
Using M.U.T.-III adjusts the following function. The
programmed information is held even when the bat
-
tery is disconnected.
•Vehicle speed-dependent wiper function
With the windshield wiper switch in the intermittent
position, the intermittent duration changes
depending on the intermittent adjusting knob
position and the vehicle speed.
•The selector "P" position-linked central door
unlocking function
When the selector lever is shifted to the "P" position,
all the doors unlock.
•Turn-signal lamp operation sound function
Synchronized with the hazard lamp and the turn sig-
nal lamp, the buzzer sounds.
•Dimmer interior lamp control duration
When the door is closed with the ignition switch
LOCK (OFF), the interior lamp is turned OFF
automatically in the specified time.
•Timer lock time after executing the keyless entry
unlock
If any door including a tailgate is not opened after
being unlocked with the keyless transmitter,
doors are locked automatically within the speci
-
fied time.
•Door-ajar warning function
Driving with any door, including a tailgate, not prop-
erly closed sounds the buzzer to let the driver
know the door-ajar state.
•Rear wiper intermittent duration
When the rear wiper switch is turned ON, the rear
wiper operates in the intermittent action. When
the rear wiper switch is turned from OFF to ON
two cycles, the rear wiper makes continuous
operation regardless of the intermittent operation
duration setting.
•Wiper linked with washer function
When this function is active, the windshield wiper
operates if the washer switch is turned ON.
•Hazard answer back function of the keyless entry
system
When lock/unlock is operated with the keyless entry
transmitter, the horn sounds so that the driver can
recognize the lock/unlock status of the vehicle
even if the driver is away from it.
•Initialising all functions (Returning to the initial
condition)
All adjusting functions are returned to the settings at
the time of factory shipment.
Item
No.Items shown
on M.U.T.-III
screenItemAdjustment items
shown on M.U.T.-III
screenAdjusting contents
4SPEED SEN
WIPVehicle
speed-dependent
wiper functionW.FUNCTIONWith function (Initial setting)
W/O FUNCTIONWithout function
9KEYLESS(HA
ZD)Hazard answer
back function of
the keyless entry
systemLOCK/UNLOCKWith function for lock/unlock (the initial
condition)
LOCKEDWith function only for lock
UNLOCKEDWithout function only for unlock
W/O FUNCTIONWithout function
14P UNLOCK
ACT.Door unlock
function linked
with "P" position
shift for centre
door lock systemW.FUNCTIONWith function
W/O FUNCTIONWithout function (the initial condition)
15T/SIG.BUZZE
RTurn-signal lamp
operation sound
functionW.FUNCTIONWith function
W/O FUNCTIONWithout function (the initial condition)
Page 292 of 364

CUSTOMISE FUNCTION
SMART WIRING SYSTEM (SWS)54B-26
16RM LMP TN
OFFDimmer interior
lamp control
duration60s60 seconds
30s30 seconds
15s15 seconds (the initial condition)
7.5s7.5 seconds
W/O FUNCTION0 second (no delay action)
24KEYLES
LOCK TTimer lock time
after executing the
keyless entry
unlock30s30 seconds (the initial condition)
60s1 minute
120s2 minutes
180s3 minutes
26DOOR WARN
BUZDoor-ajar warning
functionW.FUNCTIONWith function (Initial setting)
W/O FUNCTIONWithout function
28R.INT WIPER
TRear wiper
intermittent
duration8s8 seconds: Without continuous
operation (Initial setting)
4s(W SUCSSON)4 seconds: With continuous operation
8s(W SUCSSON)8 seconds: With continuous operation
16s(W SUCSSON)16 seconds: With continuous operation
CONTIN ACTIONContinuous operation (without the
intermittence)
37WIP SYCR
WASHWiper linked with
washer functionW.FUNCTIONWith function (Initial setting)
W/O FUNCTIONWithout function
38KEYLES
HAZARDCustomise
function for
changing the
number of the
keyless hazard
warning lamp
answerback
flashingLOCK1,UNLOCK2LOCK: Flash once, UNLOCK: Flash
twice (Initial setting)
Whether the lamps flash or not is
determined by the keyless hazard
warning lamp answerback
customisation function.
LOCK2,UNLOCK1LOCK: Flash twice, UNLOCK: Flash
once
Whether the lamps flash or not is
determined by the keyless hazard
warning lamp answerback
customisation function.
39TURN-SIGNA
LTurn signal lamp
operation
condition
adjustment
functionIG-ONTurn signal lamp can be operated when
the ignition switch is turned ON (Initial
setting).
IG-ACCTurn signal lamp can be operated when
the ignition switch 1 is in ACC or ON
position.
Item
No.Items shown
on M.U.T.-III
screenItem Adjustment items
shown on M.U.T.-III
screenAdjusting contents
Page 300 of 364

SYSTEM OPERATION
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)52B-8
SYSTEM OPERATION
FRONT AIR BAG AND SEAT BELT WITH
PRE-TENSIONER
M2521000700059
AC313906
Frontal collision against
another vehicleor
Frontal collision against a
solid surface Analogue G-sensor
Ignition judgment
Shock
above a
certain
level
Ignition signal
SRS-ECU
Front air bag safing
G-sensor
Front impact
sensor (RH)
Front impact
sensor (LH)
AB
In case of a
front a l collision, if the front imp a ct sensor
in the
engine comp artment, th e ana logue G-sensor
in the
SRS-ECU and t he fron t air b ag sa fing sensor
simult
ane ously de tect an imp a ct th at excee d a cer
-
ta in threshold (turn ON), the SRS-ECU sen d s an
ignition
sign al to the air bag modu les (squ ibs) and
seat
belt p r e-tension e rs (squib s ) on the driver and
p
a sse nger sid e s, thus inflating the air bags an d op er
-
ating the seat be lt pre - tensioners.
Page 301 of 364

SYSTEM OPERATION
SUPPLEMENTAL RESTRAINT SYSTEM (SRS)52B-9
SIDE AND CURTAIN AIR BAGS
M2521000800045
AC208121
AC206839
AC207324
Side collision against another vehicleIgnition judgment
SRS-ECU
Shock
above a
certain
level
Ignition signalCurtain air bag modules
Side-airbag modules
Side impact
sensor (RH)
Side impact
sensor (LH)
AC
Ignition signal
Side-airbag safing
G-sensor
In
case of a side co llisio n , if a n imp a ct tha t ba sed on
criteria
is simult ane ously det ect ed b y th e side imp a ct
sensors
inst alled in a centre pillar an d respectively
and by the side
-airba g sa fing G-se nsor (the senso r s
turn ON),
the SRS-ECU sends an ignition signa l to
the side-airbag modu
le an d curt ain air bag module
on the
relevant side to inf l ate them.