steering wheel adjustment MITSUBISHI COLT 2006 Service Repair Manual

CONSTRUCTION DIAGRAM
ACTIVE STABILITY CONTROL SYSTEM (ASC)35C-16
DIAGNOSIS CODE READING METHOD
There are 55 diagnosis items. The diagnosis code
can be checked using M.U.T.-III.
HOW TO ERASE DIAGNOSIS CODE
MEMORY
Diagnosis code can be erased using M.U.T.-III.
Data list output
The following items input to ASC-ECU can be read
using M.U.T.-III.
NOTE: For service data items, refer to Workshop
Manual.
Actuator test
By forcibly operating the actuator using M.U.T.-III,
the following operations can be performed.
•Forced ABS activation for each wheel
•Forced TCL (brake control) activation for each
wheel
•Forced TCL (engine control) activation
NOTE: .
•When ASC-ECU is disabled, the actuator test
cannot be performed.
•M.U.T.-III uses the ABS data list.
•For the actuator test specification, refer to Work-
shop Manual.
CALIBRATION
When the following operations are performed, the
steering wheel sensor needs to be calibrated using
the M.U.T.-III*.
•Front wheel alignment adjustment
•Steering wheel sensor replacement
NOTE: .
•M.U.T.-III uses the ABS data list.
•*: For calibration, refer to Workshop Manual.