For emergencies6-33
6
12. Lower the vehicle slowly and then tighten the nuts in theorder shown in the illustration until each nut has been
tightened to the torque listed here.
Tightening torque
98 to 118 Nm
(Achieved by applying the force of 440 to 520 N at the
end of the wheel nut wrench supplied with the vehicle) 13. Lower and remove the jack, then store the jack, flat tyre,
and chock. Have your damaged tyre repaired as soon as
possible.
14. Check your tyre inflation pr essure. The correct pressures
are shown on the door label. See the illustration.
CAUTION!
● Never apply oil to either the wheel bolts or the nuts
or they will tighten too much.
CAUTION!
●Never use your foot or a pipe extension for extra
force in the wheel nut wrench. If you do so, you will
tighten the nut too much.
CAUTION!
●The tyre pressure should be periodically checked
and maintained at the specified pressure while the
tyre is stowed.
9-12 Specifications
9Engine specifications
E01100601363
Item
Petrol-powered vehiclesDiesel-powered vehicles
1100 models1300 models
1500 models
1.5L DI-D
50kW (68PS)1.5L DI-D
70kW (95PS)Except for vehi- cles with
turbochargerVehicles with turbocharger
Engine type Three-cylinder,
in line, water cooled four-
cycle, double
overhead cam- shaft Four-cylinder, in
line, water
cooled four-
cycle, double
overhead cam- shaft Four-cylinder, in
line, water
cooled four-
cycle, double
overhead cam- shaft Four-cylinder, in
line, water
cooled four-
cycle, double
overhead cam-
shaft with inter- cooler and
turbocharger Three-cylinder, in line, water
cooled four-cycle, double overhead camshaft
with intercooler and turbo- charger
Engine model
Total displacement
Bore
Stroke
Compression ratio 134910
1,124 cc
75.0 mm
84.8 mm 10.5 135930
1,332 cc
75.0 mm
75.4 mm 10.5 135950
1,499 cc
75.0 mm
84.8 mm 10.5 4G15
1,468 cc
75.5 mm
82.0 mm 9.0 639939
1,493 cc
83.0 mm
92.0 mm 18.0
Valve clearanceIntake 0.18 - 0.26 mm (cold) Automatically
Exhaust0.26 - 0.34 mm (cold) Automatically
Firing order1-3-2 1-3-4-2 —
Maximum output (EEC
net)55 kW/
6,000 r/min 70 kW/
6,000 r/min 80 kW/
6,000 r/min 110 kW/
6,000 r/min 50 kW/
4,000 r/min 70 kW/
4,000 r/min
Maximum torque (EEC
net) 100 Nm/
4,000 r/min 125 Nm/
4,000 r/min 145 Nm/
4,000 r/min 210 Nm/
3,500 r/min 160 Nm/
1,600 r/min 210 Nm/
1,800 r/min
