rocker cover MITSUBISHI ENDEAVOR 2004 Service Repair Manual

1. Install special tool MD998769 and the crankshaft pulley washer, and then
tighten the crankshaft bolt.
2. Align the timing mark on the crankshaft sprocket with the timing mark on the
oil pump case, and then rotate the sprocket three teeth counterclockwise.
Fig. 24: Aligning The Timing Mark On Crankshaft Sprocket & Timing
Mark On Oil Pump Case

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
3. Align the timing mark on the left bank camshaft sprocket with the timing mark
on the rocker cover.
4. Align the timing mark on the right bank camshaft sprocket with the timing
mark on the rocker cover.

2004 Mitsubishi Endeavor Limited 2004 ENGINE Engine Overhaul - Endeavor

Fig. 25: Align The Timing Mark On The Right Bank Camshaft Sprocket With Timing Mark On Rocker Cover

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
5. Align the timing mark on the crankshaft sprocket with the timing mark on the
oil pump case.
6. Install the timing belt on each sprocket and pulley in the following sequence.
Do not leave the belt slack between each sprocket and pulley.
1. Crankshaft sprocket
2. Idler pulley
3. Left bank camshaft sprocket
4. Water pump pulley
5. Right bank camshaft sprocket
6. Tensioner
pulle
y

2004 Mitsubishi Endeavor Limited 2004 ENGINE Engine Overhaul - Endeavor

4. Install the auto-tensioner to the engine.
>>B<< TIMING BELT INSTALLATION 1. Align the timing marks on the camshaft sprockets with those on the rocker
cover and the timing mark on the crankshaft sprocket with that on the engine
block as shown in the illustration.
CAUTION: Do not remove the setting pin from the auto-
tensioner.
CAUTION: The camshaft sprocket (right bank) can turn
easily due to the spring force applied, so be
careful not to get your fingers caught.

2004 Mitsubishi Endeavor Limited
2004 ENGINE Engine - Endeavor