setting MITSUBISHI LANCER 2010 8.G MMCS Manual

Advanced Search 3-11
Destination
3 Touch [Set]
eng_a090
>>> Continued at “Destination Setting” (page 3-12)FWY Area List Screen
eng_a090
A) Area information
a) Exit number
b) Freeway name
c) Distance from vehicle
B) The POI with the highest priority in the vicinity
of the exit
d) The closest POI to the exit
C) POI list display button
Displayed if there are two or more facilities in the area
vicinity. Displays the list and enables selection of stored
facilities at the destination or along the route.
Map Point
Searching for a location by scrolling
(page
2-8)
the map.

1 Display the “Advanced Search”
menu and touch [Map Point]
The scroll menu is displayed.
The remaining operations are the same as from “Destination Setting for Scrolled Position” (page 2-8)
.
Return Trip
The starting position when setting a route
can be set as a new destination.
1 Display the “Advanced Search”
menu and touch [Return Trip]
A map of the vicinity is displayed with the starting
position at the center.>>> Continued at “Destination Setting” (page 3-12)
Latitude/Longitude
The destination can be set by specifying
the latitude/longitude.
1 Display the “Advanced Search”
menu and touch [Latitude/Longitude]
The latitude/longitude of the current location are
displayed. 2 Touch [Latitude] or [Longitude]
eng_a091
The latitude or longitude can now be edited. 3 Input the latitude/longitude of the
destination
eng_a092
NOTE Touch [ ] or [ ] to change the input position. 4 Touch [Set]
>>> Continued at “Destination Setting” (page 3-12)
a)
c) b)
d)
A) B) C)




 

 



Destination Setting 3-12
Destination Setting
After deciding on a location it can be set as a
destination or way point, or the location can
be stored.
Setting as Destination
Setting the displayed location as the
destination.
1 Touch [Start]
eng_a093
When a route has already been set, that route is
deleted and a route search starts with the displayed
location as the destination.

eng_a074
NOTE
Carpool / HOV inclusion (if so equipped) This screen
displays after
touching[Start]if
there are Carpool/
HOV lanes in
the route set.
Touch[Yes]if a
Carpool/HOV lane
is to be used.
eng_a503-2
 The Carpool/HOV information concerning time
regulations and requirements for the number of
passengers may sometimes vary or conflict with
the actual traffic regulations.Make sure to drive in
accordance with the actual road situation and traf c
rules.
Setting as Way Point
After finding a location when a route has
already been set, the displayed location
can be set as a way point.
1 Touch [Itinerary List]
A list of the way points and destination is displayed. 2 Touch [Add] in the sequence in
which it is to be visited
eng_a095
The searched location is added to the route as a way
point. 3 Touch [Start]
eng_a096
The route search is started.




 

 


Destination Setting 3-13
Destination
NOTE Touch [Info] to
display a map of
the vicinity and
corresponding
information.
eng_a097
 Touch [Show Route] to display the entire route, view 3
different routes and change the calculation conditions in
the same way as
“Showing the Route” (page 4-4)
.
 Touch [Re-order] to change the sequence for visiting each
location in the same way as
“Re-ordering” (page 4-5)
.
 Touch [Add] to add a way point in the same way as “Adding a Way Point” (page 4-6)
.
 Touch [Delete] to delete a destination or way point in
the same way as
“Deleting” (page 4-6)
.

Touch [Option] to perform settings related to the route in
the same way as
“Route Options” (page 10-12)
Storing the Location
Storing the displayed location and adding
it to the address book.
1 Touch [Address Book]
The information screen for the location to be stored is
displayed. 2 Touch [Set to Address Book]
eng_a098
The displayed location is stored in the address book.NOTE Stored information other than “State” can be edited.
When editing an icon or name, perform in the same
way as
“Editing a Location” (page 5-4)
.




 

  


Destination Setting 3-14




 

 


Detour 4-3
Route
Detour
Detours that specify the distance from the
current location, or detours that specify
streets to avoid can be set.
1 Touch [Route] on the current
location screen
eng_a074
The route menu is displayed. 2 Touch [Detour]
eng_a500-2

eng_a107
The detour setting screen is displayed.
Detour Distance
Specifying the distance to calculate the
detour route.
1
Touch the desired detour distance
for “Detour Distance” in the detour
setting screen
(page 4-3)

eng_a108
A detour route is calculated according to the speci ed
distance, and route guidance starts.NOTE The distance unit in the factory settings is “miles”. If the
unit is changed to “km” (
“System Settings” (page 10-5)
),
the detour distances are [1], [5], [10], [20], [40], [80].
 A detour route longer than the entire route length
cannot be selected.
Avoid Street
Settings are performed here for selecting
a start street and an end street, and
detouring the area in between.
1 Touch [Avoid Street] in the detour
setting screen
(page 4-3)
A list of streets to be passed on the current route is
displayed. 2 Touch the start street
eng_a109
NOTE If the route to be calculated detours only one street,
go to step 4. 3 Touch the end street
eng_a110
4 Touch [Set]
A detour route is calculated according to the speci ed
street area, and route guidance starts.






 


Editing the Route (Itinerary) 4-4Editing the Route (Itinerary)The destination position can be changed,
a way point can be added, and the route
calculation conditions can be changed.
1 Touch [Route] on the current
location screen
eng_a074
The route menu is displayed. 2 Touch [Itinerary]
eng_a500-2

eng_a096
The itinerary list screen is displayed.
NOTE Touch [Info] to display a map of the vicinity and
corresponding information.
 Touch [Start] to calculate the route with the current
settings and start route guidance.
Showing the Route (3 Routes)
The entire route can be displayed, 3
different routes can be viewed, and the
calculation conditions can be changed.
1 Touch [Show Route] in the
itinerary list screen
(page 4-4)
Location Information Button
Route Option Icon
eng_a094
The show route screen is displayed.NOTE Touch [
] of the location information button or
[1], [2]..., to display the map of the vicinity of the
destination and way point.
 The route option icon can be used to view with icons
the information set in
“Route Options” (page 10-12)
.
Refer to
“Route Option Icon” (page 4-1)
for the
meanings of the icons.
 Touch [Option] to perform settings related to the
route in the same way as from
“Route Options”
(page 10-12)
.
NOTE Touch [Rt. Outline] to display a list of the intersections
up to the destination where turns are required. >>> “Route Outline” (page 4-2)Touch [Preview] to scroll the map along the route. >>> “Preview” (page 4-2) Touch [Modify] to return to the itinerary list screen. 2 Touch [3 Routes]
3 routes are displayed: [Fast], [Short] and [Easy]. 3 Touch [Fast], [Short] or [Easy]
eng_a111
4 Touch [Back]
eng_a112






  


Editing the Route (Itinerary) 4-7
Route
4 Touch [Yes]
eng_a123
5 Touch [Start]
eng_a124
Guidance starts for the changed route.
Option
Settings related to the route can be
performed.
1 Touch [Option] in the itinerary list
screen
(page 4-4)

eng_a125
The route options screen is displayed.
The remaining operations are the same as from step 3
of “Route Options” (page 10-12)
.






 


Storing a New Location 5-3
Address Book
4 Touch one of the search methods
to search for the location
eng_a129-2
Refer to the following pages to search for the location.>>> [Address/Intersection] (page 3-2)
>>> [Point of Interest] (page 3-5)
>>> [Advanced Search] (page 3-8)
>>> [Previous 20] (page 3-7)
>>> [Address Book] (page 3-7) 5 Touch [Set]
eng_a130
6
Touch each item to input information
eng_a131
NOTE Touch [Edit] of “Home Location” in
“Personal
Settings” (page 10-16)
to change home information.
 Touch [Delete] of “Home Location” in
“Personal
Settings” (page 10-16)
to delete the home location.
7 Touch [Set as Home]
The storing of the home location is completed.
Icons
25 icon types can be set for the stored
location; the 24 types shown below and
“HOME”.HOME1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
NOTE Only one location can be set as “HOME”.
 The number to the side of the icon shows the priority
when the icons are ordered in a list.






 


Editing a Location 5-4
Editing a Location
The information about stored locations in the
address book can be edited or deleted.
1 Display the Navi Menu, and touch
[Navigation Settings]
eng_a502-2
2 Touch [Personal]
eng_a016-1

eng_a128-1
The personal settings screen is displayed.
NOTE Touch [New] of “Address Book” to create a new
location to store. Store using the same operations as “Storing a New Location” (page 5-1)
.
Editing
Editing information about a stored
location.
1 Touch [Edit] of “Address Book”
in the Personal Settings screen
2
Touch the stored location to change
eng_a132
NOTE Touch [Icon] to order the locations in icon sequence.
Refer to
“Icons” (page 5-3)
for details on the icon
priority.
 Touch [Name] to order the stored location names in
alphabetical sequence.
 Touch [Date] to order the registration dates with the
newest at the top.
3 Touch the item to change
eng_a133
NOTE Refer to
“To Customize/Modify Address” (page 5-2)

for details on the items to change.
4 Touch [Set] after changing the
item
eng_a134
Repeat steps 3 and 4 until all the desired items have
been changed.NOTE [Set] is not available
for “Icon”. The change is set
by touching the
icon button.
eng_a135






 


Editing a Location 5-5
Address Book
5 Touch [Set to Address Book]
eng_a136
The information change is completed.
Deleting
Deleting a stored location.
1 Touch [Delete] of “Address
Book” in the Personal Settings screen
2
Touch the stored location to delete
eng_a137
NOTE The stored locations targeted for deletion are
displayed with a black highlight.
Touch a location again to remove it from the deletion
target.
 Multiple locations can be selected at the same time.
 Touch [Select All] to delete all stored locations at the
same time. 3 Touch [Done]
eng_a138
4 Touch [Yes]
eng_a139
The selected stored locations are deleted.