jack points MITSUBISHI LANCER 2013 8.G Owners Manual

For emergencies
6-13
6
To change a tire
N00849800388
1. On vehicles with wheel covers, first remove the covers
(refer to “Wheel covers” on page 6-20). Then loosen the
wheel nuts with the wheel nut wrench. Do not remove the
wheel nuts yet.2. Place the jack under one of the jacking points (A) shown
in the illustration. Use the jacking point closest to the tire
you wish to change.
WA R N I N G
!
Set the jack only at the positions shown here. If the
jack is set at a wrong position, it could dent your
vehicle or the jack might fall over and cause per-
sonal injury.
Do not use the jack on a tilted or soft surface.
Otherwise, the jack might slip and cause personal
injury. Always use the jack on a flat, hard surface.
Before setting the jack, make sure there are no sand
or pebbles under the jack base.
BK0150800US.book 13 ページ ２０１２年３月２９日　木曜日　午後２時３８分

Alphabetical index
5
J
Jack 6-8
Storage 6-7
Jump-starting the engine 6-2
K
Key reminder buzzer 3-55
Keyless entry system 3-9
Keys 3-2
L
Labeling 9-2
License plate light
Bulb capacity 7-54
Replacement 7-82
Limited-slip differential 3-144
Link System 3-257
Loading information 4-9
Lubricants 9-10
Luggage floor boxes 3-302
M
Malfunction indicator 3-230
Manual air conditioning 5-22
Manual transaxle 3-96
Oil 7-18
,9-10
Shift points (recommended speed) 3-97Mirror
Inside day/night rearview mirror 3-81
Outside rearview mirrors 3-84
Modifications to and racing of your vehicle 1-7
Multi-information display 3-182
O
Octane requirement 1-2
Oil
Engine oil 7-8
,9-10
Manual transaxle oil 7-18
,9-10
Rear axle oil 7-20
Transfer oil 7-19
Operation under adverse driving conditions 6-24
Outside rearview mirrors 3-84
Overheating 6-5P
Parking 4-8
Parking brake 3-78
Parking brake lever stroke 7-38
Polishing 7-92
Power brakes 3-145
Power door locks 3-56
Power steering
Fluid 7-22
,9-10
System 3-157
Power windows 3-70
Puncture (Tire changing) 6-9
BK0150800US.book 5 ページ ２０１２年３月２９日　木曜日　午後２時３８分