tow MITSUBISHI LANCER 2015 8.G Owners Handbook
[x] Cancel search | Manufacturer: MITSUBISHI, Model Year: 2015, Model line: LANCER, Model: MITSUBISHI LANCER 2015 8.GPages: 16, PDF Size: 1.26 MB
Page 6 of 16

4CONTROLS
Regular Headlights Automatic Headlights
Headlights and other lights on.
Parking, tail, front and rear sidemarker lights, license plate and
instrument panel lights on.
Headlights and other lights turn on and off automatically in
accordance with outside light level.
All lights off
AUTOOFF
Fog Lights (if equipped)
High/Low Beam Switch
Fog Lights will illuminate only when headlights are on low beam.
Turning the knob in the direction of the ON position turns on the
fog lights. Turning the knob in the direction of the OFF position
turns off the fog lights. The knob will return to the neutral
position when released.
To change the headlights from high beam to low beam and vice versa, pull \
the turn signal lever fully towards you (1). An illuminated blue light\
in the
instrument cluster indicates when the headlights are on high beam.
• Headlight flasher
You can flash the high beams by pulling the lever gently towards you (\
2).
Page 8 of 16

A - CANCEL: To deactivate the cruise control
B - ACC RES: To increase the set speed or resume previously set cruise control operation.
C - COAST SET: To set the desired speed and to reduce the set speed
D - ON/OFF: To turn ON/OFF cruise control
To set a cruising speed
1. Press D and the CRUISE indicator light in the
meter cluster will be turned on.
2. Accelerate or decelerate to your desired speed
(above 25 mph). Press C and remove your foot
from the accelerator pedal.
To accelerate or decelerate speed
Press B to increase set cruising speed.
Press C to decrease set cruising speed.
To cancel the cruising speed
Press A or press brake pedal, or press D .
6OWN THE ROAD
– :SHIFT DO WN+ :SHIFT UP
Paddle Shifters (if equipped)
Seat Heater Switch (if equipped)
Position - Action
(HI) - For quick heating
(LO) - To keep the seat warm
Drive Mode Selector (if equipped)
The drive mode can be selected by pressing the
switch while the ignition switch is in the ON
position.
2WD: This mode is for economical driving on
normal dry roads and freeways.
4WD AUTO: This mode is for all driving conditions
on various roads.
4WD LOCK: This mode is for driving in slippery
conditions such as on snow-covered roads or sand.
Cruise Control
AB
C
D
Simply upshift or downshift
with a tap of your fingers,
without moving your hands
from the steering wheel.
You can return to the automatic
shifting mode by pulling the +
(SHIFT UP) side paddle shifter
towards you and holding for
over 2 seconds.