remote control MITSUBISHI LANCER 2016 8.G User Guide

Free-hand Advanced Security Transmitter (F.A.S.T.-key) (if so equipped)5-32
Features and controls
5
2.The
headlights
will
blink
on
and
off and
the
horn
will
sound
intermittently
for
about
3 minutes.
3.To turn
off the
alarm,
press
any
button
on
the remote control transmitte
r.
N0056130
0029
Only
a F.A.S.T
.-key
, which
has
been
pro-
grammed
into
the
vehicle’
s electronics,
can
lock
and
unlock
all
the
doors,
and
start
the
engine. If you
los
e the
F.A.S.T.-key
, you
can
order
a
F.A.S.T
.-key
from
your
authorized
Mitsubishi
Motors dealer by referring to the key number
.
To prevent
vehicle
theft,
the
ID
codes
for
all
the
F.A.S.T
.-keys
except
the
one
for
the
lost
F.A.S.T
.-key must be programmed again.
Take
your
vehicle
and
all
the
remaining
F.A.S.T
.-keys
to
your
authorized
Mitsubishi
Motors
dealer
to
have
your
ID
codes
pro-
grammed again.
N0056140
0020
To add
a F.A.S.T
.-key
, you
must
already
have
two registered F
.A.S.T
.-keys.
Registering
the
ID
code
can
be
done
by
your
authorized
Mitsubishi
Motors
dealer
. Or
it
can
be
done
by
yourself
(except
for
vehicles
sold
in
Canada).
For
you
to
register
the
ID
code
yourself,
follow
the
“Customer
F.A.S.T
.-key
programming”
procedure
below
.
If you
choose
to
have
your
authorized
Mit-
subishi
Motors
dealer
register
the
ID
code,
take
your
vehicle
and
all remaining
F.A.S.
T.-
keys
to
your
authorized
Mitsubishi
Motors
deale
r.
N00561
501116
You
can
program
new
F.A.S.T
.-keys
to
the
system
if you
have
two
valid
(already
regis-
tered)
F.A.S.T
.-keys,
blank
(not
registered)
F.A.S.T
.-key
and
emer
gency
key
(specially
cut
for
your
vehicle
at
your
Mitsubishi
Motors dealer).To use
the
new
F.A.S.T
.-key
, it is necessary
to
register
the
key
with
both
the
electronic
immobilizer and keyless entry system.Also
refer
to
“Electronic
immobilizer:
Cus-
tomer
F.A.S.T
.-key
programming”
on
page
5-28. For
F.A.S.T
.-key
programming,
follow
the
procedures below
.
1.Remove
the
eme
rgency
key
from
the
F.A.S.T
.-key
. Refer
to
“Eme
rgency
key”
on page 5-22.2.While
pushing
the
lock
release
buttons
(A),
remove
the
cover
of
the
ignition
switch.3.Insert
the
emer
gency
key
into
the
ignition
switch.4.Insert
the
valid
F.A.S.T
.-key
into
the
emer
gency key
.
Replacement
F.A.S.T
.-keys

Additional
F.A.S.T
.-keys

NOTE
You
are
provided
with
two
F.A.S.T
.-keys,
but
you may register up to four F
.A.S.T
.-keys.
Customer F
.A.S.T
.-key pr
ogram-
ming (Except for vehicles sold in Canada)

Free-hand Advanced Security Transmit
ter (F.A.S.T.-key) (if so equipped)
Features and controls
5-33
5
5.Turn
the
emer
gency
key
with
F.A.S.T
.-
key
to
the
“ON”
position.
(Perform
the
following procedure within 30 seconds)6.Remove
the
F.A.S.T
.-key
from
the
emer
-
gency key
.
7.With
the
first
valid
F.A.S.T
.-key
, press
the
UNLOCK
button
for
4 to 10
seconds
and
press the LOCK button during this time.8.Release
in
sequence
the
LOCK
and
UNLO
CK
buttons
within
10
seconds
of
pressing
the
LOCK
button
in step
7. (Per
-
form
the
following
procedure
within
30
seconds
)
9.With
the
second
valid
F.A.S.T
.-key
, press
the
UNLOCK
button
for
4 to 10
seconds
and
press
the
LOCK
button
during
this
time.
10.
Release
in
sequence
the
LOCK
and
UNLO
CK
buttons
within
10
seconds
of
pressing
the LO
CK
butt
on
in
step
9, and
the
immobilizer
display
will
blink
on
the
information
screen
in
the
multi-informa-
tion
display
. (Perform
the
following
pro-
cedure within 60 seconds)
11.Press
the
LOCK
button
twice
with
the
blank
F.A.S.T
.-key
and
the
immobilizer
display
will come
on
for
30
seconds
on
the
information
screen
in the
multi-infor
-
mation displa
y.
12.
This
completes
the
registration
of
the
F.A.S.T.-key.
N00561601
074
Your
F.A.S.T
.-key
operates
on
a radio
fre-
quency
subject
to
Federal
Communications
Commission
(FCC)
Rules
(For
vehicles
sold
in
U.S.A.)
and
Industry
Canada
Rules
(For
vehicles
sold
in
Canada).
This
device
com-
plies
with
Part
15
of
FCC
Rules
and
Industry
Canada licence-exempt RSS standard(s). Operation
is subject
to the
following
two
con-
ditions
.
NOTE
The
ind
icator
light
(5)
comes
on each
time
a
button
is pre
ssed.
The
keyless
entry
system
does
not
work
if
the
key
is in the
ignition switch.
The
F.A.S.
T.-key
can
be
used
from
about 40
feet
(12
m)
away
. However
, this
distance
may
change
if your
vehicle
is near
a TV
trans
mitting
tow
er, a pow
er
station,
or
a
radio
station.
If the UNL
OCK
button
(2)
is pre
ssed whe
n
all
doors
are
locked
and
no
doors
are
opened
within
about
30
seconds
, the
doors
will auto-
matically
re-lock.
If the followi
ng
conditions
are obse
rve
d after
pressing
the
buttons
on
the
remote
control
transmitter
, the battery
in the remo
te cont
rol
transmitter
may need
to be replaced
.
•The doors cannot
be locked or unl
ocked.
•The trunk
lid cannot
be ope
ned.
•The panic alar
m cannot
be ope
rated
.
•The
indicator
light
(5)
is dim
or
does
not
come
on.
If you
lose your
F.A.S.T.-key
, pleas
e contact
an authorized
Mitsubis
hi Motors
dealer
for
a
replacement.If you
wish
to obtain
an
additional
F.A.S.T
.-
key, pleas
e con
tact
an authorized
Mitsubi
shi
Motors
dealer
. A max
imu
m of four
F.A.S.T
.-
key can be
pro
grammed fo
r your vehicle.
To use
the
new
remote
control
transmitters,
it
is necessary
to register
the
key
with
both
the
electronic
immobilizer
and
keyless
entry
sys-
tem. Also refer to “Electronic
immobilizer
(Anti-
theft
starting
system):
Customer
F.A.S.T
.-
key programming” on page 5-28.
General
information

NOTE

Door
locks
5-34
Features and controls
5
This
device
may
not
cause
harmful
inte
r-
ference.This
device
must
accept
any
interference
received,
including
interference
that
may
cause undesired operation.
N0056170
0081
1.Before
replacing
the
battery
, remove
static
electricity
from
your
body
by
touching
a
metal
grounded
object.
2.With
the
Mitsubishi
mark
facing
you,
insert
the
cloth-covered
tip
of
a flat
blade
screwdriver
into
the
notch
in
the
remote
control
transmitter
case
and
use
it to open
the case.
3.Remove the old battery
.
4.Install
a new
battery
with
the
+side
(A)
up.
5.Close
the
remote
control
transmitter
case
firml
y.
6.Check
the
keyless
entry
system
to see
that
it works.
N0050920
0491
CAUTIONChanges
or
modifications
not
expressly
approved
by
the
man
ufactur
er for compli-
ance could
void
the user’s authority
to oper
-
ate
the
equipment.
Pr
ocedur
e for r
eplacing the
remote
contr
ol
transmitter
battery

NOTE
Be
sure
to perform
the
procedure
with
the
Mitsubi
shi mark
facing
you.
If the Mitsubi
-
shi
mark
is not
facing
you
when
you
open
the
remo
te cont
rol transmitter
cas
e, the transmit-
ter
may
come
out.
+ side
- side
Coi
n type
bat-
tery
CR203
2
NOTE
You
may
purchas
e a replacement
battery
at
an electric
appliance
store.
Your
authorized
Mitsubi
shi Mot
ors
dealer
can
replace
the battery
for
you
if you
pre
fer.
CAUTIONWhen the remo
te control
transmitter
cas
e is
opened,
be
careful to keep
water
, dust, etc.
out.
Also,
do
not
touch
the
internal
compo-
nen
ts.
Door locks
W
AR
NING
Mak
e sur
e all
doors
are tigh
tly
clos
ed and
locked
while
driving.
•Locked
doors,
in
combination
with
the
use
of seat
belts,
can
help
reduce
the
risk
of ejection
in an
accident.
•Locked
doors
can
help
keep
passengers,
especially
small
childr
en,
from
opening
doors
and
falling
out
of moving
vehicles.

Door locks
Features and controls
5-35
5
Turn
the
key
toward
the
front
of the
vehicle
to
lock
the
door
. After
checking
that
the
door
is
locked,
turn
the
key
back
to
the
center
and
remove it.
Move
the
lock
knob
to
the
lock
position
to
lock the doo
r.
All
doors
should
be
kept
locked
while
driv-
ing.The
driver
’s door
can
be
unlocked
without
using
the
lock
knob
by
pulling
on
the
inside
door handle.1.Move
the
inside
lock
knob
to
the
locked
position.
•Locked door
s can
help
prevent outsi
ders
from
gain
ing access
to you
r veh
icle
whe
n
you
slow
or come
to a stop.
Lock
your vehicle
whe
never
you
leav
e it.
Childr
en who
get
into
unlocked
vehicles
may
not
be
able
to
get
out.
Childr
en
trapped
inside
vehicles
can
quickly
be
ove
rcome
by
heat
and
suffer
serious
injur
y or death
due
to he
at str
oke.
Never
lea
ve
children unatte
nde
d insi
de a
vehicle.
In
addition
to
the
risk
of
heat
stroke,
childr
en can
activate
switches
and
contr
ols,
resulting
in
an
injury
or
fatal
accident.NOTE
When
locking
or unlo
cking
with
the key,
only
the driver’s door
will
be
locked or
unlocked. To lock
or
unlock
all
doors
, use the
pow
er
door
lock
switches,
the
keyless
entry
system,
the
F.A.S.T
-key
or the
remote
control
trans-
mitter of the F
.A.S.T
.-key
.
Refer to “Powe
r door l
ocks”
on pa
ge 5-37,
“Keyless
entry
system”
on
page 5-7
and
5-30,
and
“To ope
rate
using
the F.A.S.T
.-
key” on pa
ge 5-14.
In
vehicles
equipped
with
the
F.A.S.T
.-key
,
the
driver
’s door
can
be locked
and
unlocked
using
the
emer
gency
key
.
Refer
to “Emer
gency
key”
on
page
5-22.
W
AR
NING
To lock or unlock the fr
ont
doors with the key 1-
Insert or remove the key
2-
Lock
3-
Unlock
To lock
or
unlock
the
door
from
the inside 1-
Lock
2-
Unlock
To lock the door without using the key

Trunk lid
Features and controls 5-39
5
N00509501198
Insert the key and turn it clockwise. The trunk lid will pop up
slightly. Lift it to
open the trunk. Press the trunk button (Vehicles with keyless entry system or F.A.S.T.-key) or OPEN switch (Vehicles with F.A.S.T.-key). (See
“Keyless entry system” on page 5-7, 5-30 or “Free-hand Advanced Security Transmitter (F.A.S.T.-key)” on page 5-12.) The trunk lid will pop up
to slightly. Lift it to
open the trunk. Pull the trunk lid release lever, located to the left of the driver’s seat, up to open the trunk.
Trunk lid
WA R N I N G It is dangerous to drive with the trunk lid open since carbon monoxide (CO) gas can enter the cabin. CO is an invisible, odor- less gas that can cause unconsciousnessand even death. Do not allow children to have access to the trunk, either by climbing into the trunk from outside or through the inside of the vehicle. Always close the trunk lid whenyour vehicle is unattended. If trapped in the trunk, it is possible to escape from the trunk by using the in
side emergency trunk
release lever. (See “Inside emergency trunk lid release” on page 5-40.)CAUTION Do not stand behind the exhaust pipe when loading and unloading luggage. Heat from the exhaust could lead to burns.
To open Operation from outside the vehicle Using the key (Vehicles with key cylin- der) Using the remote control transmitter (Vehicles with keyless entry system orF. A . S . T. - k e y )
CAUTION Do not use the trunk lid release lever while the vehicle is moving. If the trunk lid is opened, objects in the trunk could fall ontothe road and cause an accident.
BK0230300US.bo
ok 39 ページ ２０１５年７月３０日　木曜日　午後８時３８分

Theft-alarm system
Features and controls 5-41
5
To open the trunk from the inside, move the lever (A) in the direction of the arrow on the lever. Push up on the trunk lid to open the trunk and climb out.
N00510200185
The theft-alarm system is designed to provideprotection from unauthorized entry into the vehicle. This system is operated in three stages: the first is the “armed” stage, the sec-ond is the “alarm” stage,
and third is the “dis-
armed” stage. If triggered, the system provides both audible and visual alarm sig-nals.
N00510301183
Park the vehicle and stop the engine. Arm the system as described below.
1. Turn the ignition switch to the “LOCK” position. Also, if a key was used to start the engine, remove the key from the ignition switch.2. Make sure that the trunk lid and engine hood are closed. 3. Lock all doors by either the remote con-trol transmitter or the F.A.S.T.-key. At this time, the theft-alarm indicator (A) on the audio panel flashes for confirma-tion.
WA R N I N G Children should never be left unsuper- vised in or around vehicles. Unsupervised children could lock them- selves in an open vehicle or trunk. People trapped inside a vehicle or trunk, even if only for a short period of time, canquickly die from suffocation or heat stroke, especially on hot days. Interior temperatures in vehicles can rise in min-utes. Keep your vehicle doors locked and the trunk lid closed when not in use. Keep your vehicle keys away from children.
CAUTION When loading the trunk, place your things so that they will not touch the emergency trunk lid release lever when you close the trunk. Otherwise you could damage the lever and make it unusable.
Theft-alarm system
CAUTION Do not modify or add parts to the theft-alarm system. Doing so could cause the theft-alarm to malfunction.
Armed stage
Arm the system and leave
BK0230300US.bo
ok 41 ページ ２０１５年７月３０日　木曜日　午後８時３８分

Theft-alarm system 5-42 Features and controls
5
4. The system has entered the armed stage after about 20 seconds, when the theft- alarm indicator (A) flashing becomes slower.The theft-alarm indicator (A) continues to flash while the system is in the armed stage.
N00510401197
The alarm will be activated if any of the fol-lowing occur while the vehicle is parked andthe system is armed.
 One of the doors is opened without using the remote control transmitter or the F. A . S . T. - k e y.  The engine hood or the trunk lid is opened.
When the alarm is activated: 1. The headlights blink on and off for 3 min- utes.After 3 minutes the headlights automati- cally shut off. 2. The horn will sound intermittently for 3minutes.
Ty p e 1 Ty p e 2 The alarm can be deactivated in the following ways.
NOTE
 If the engine hood or the trunk lid is open, the theft-alarm indicator (A) illuminates and the system cannot enter the armed stage. The system enters the armed stage about 20 sec-onds after the engine hood or the trunk lid is closed.  The system will be disarmed if, while the theft-alarm indicator (A) is illuminated, all doors are unlocked by remote control trans-mitter or the F.A.S.T.-key.  The system will be disarmed if, while the theft-alarm indicator is illuminated, the igni- tion switch is turned to the “ON” position.  The system will not be
armed if a door or the
trunk lid or the engine hood is not com- pletely closed. If this happens, rearm the sys-tem as described above.
Alarm stage
Type of alarm Horn sounds!Headlights blink on and off!
NOTE
 The alarm will continue to operate for 3 min- utes. At the end of that period, the alarm will automatically shut off to save battery power. The system will then
be rearmed until the
proper disarming step is taken.  The alarm will resume if unauthorized actions are taken again, even if the alarm hasstopped.  While the alarm is operating, a warning is displayed on the information screen in the multi-information display.
Alarm deactivation
BK0230300US.bo
ok 42 ページ ２０１５年７月３０日　木曜日　午後８時３８分

Power windows
Features and controls 5-43
5
 By using the remote control transmitter or the F.A.S.T.-key to lock or unlock the door.  Turn the ignition switch to the “ON” posi- tion.
N00510501169
The system will be disarmed if the followingoperation is performed.  The ignition switch is turned to the “ON” position.  All doors are unlocked by the remote con- trol transmitter or the F.A.S.T.-key.
N00510601128
Use the following procedure to test the sys-tem: 1. Lower the driver’s window. 2. Arm the system as explained in “Armed stage”. 3. Make sure that the theft-alarm indicatorcomes on and flashes for approximately 20 seconds. 4. Wait a few seconds and then unlock thedriver’s side door by using the inside door lock knob and open the door. 5. Check to be sure that the horn soundsintermittently and the headlights blink on and off when a door is opened. 6. Disarm the system by unlocking all doorsby the remote control transmitter or the F. A . S . T. - k e y.
N00510800367
Disarmed stage
NOTE
 If the UNLOCK button is pressed when all doors are closed and no door is openedwithin approximately 30 seconds, re-arming will automatically occur.Disarm...by remote control transmitter or F. A . S . T. - k e y
 The amount of time after unlocking until the vehicle relocks automatically can be adjusted. See an authorized Mitsubishi Motors dealer for details.  Once the system has been disarmed, it can- not be rearmed except by repeating the arm- ing procedure.
Testing the theft-alarm system
NOTE
Power windows 1- Open (down) 2- Close (up)
NOTE
 Never try to operate the main switch and sub switch in different directions at the sametime. This will freeze the window in posi- tion.  Operating the power windows repeatedly with the engine stopped will run down the battery. Use the window switches only whilethe engine is running. WA R N I N G Before operating the power windows, make sure that nothing can be trapped(head, hands, fingers, etc.) in the window.
BK0230300US.bo
ok 43 ページ ２０１５年７月３０日　木曜日　午後８時３８分

Combination headlights and dimmer switch
Features and controls 5-131
5
N00550000198
You can flash the high beams by pulling the lever gently toward you (2). The lights will go back to normal when you let go. While the high beam is on, you will see a blue light onthe instrument panel.
N00563201188
This function turns on the front side-markerand parking lights for about 30 seconds after the UNLOCK button (A) on the remote con- trol transmitter is pressed when the combina-tion headlights and dimmer switch is in the “OFF” or “AUTO” position (for vehicles equipped with the automatic light control).On vehicles equipped with the automatic lightcontrol, the welcome light function will oper- ate only when it is dark outside the vehicle.
N00547300054
This function turns on the headlights in thelow beam setting for about 30 seconds after the ignition switch is turned to the “LOCK”position.
Headlight flasher
NOTE
 You can flash the high beams by pulling the lever toward you, even if the combination headlights and dimmer switch is off.  If you turn the lights off with the headlights set to high-beam illumination, the headlightsare automatically returned to their low-beam setting when the combination headlights and dimmer switch is next turned to the “ ”
Welcome light (for vehicles with the theft-alarm system)
NOTE
 While the welcome light function is operat- ing, perform one of the following operations to cancel the function.
• Push the LOCK button (B) on the remote control transmitter. • Turn the combination headlights and dim- mer switch to the “ ” or “ ” position. • Turn the ignition switch to the “ON” posi- tion.
 It is possible to modify functions as follows: • The headlights can be se
t to come on in the
low beam setting. • The welcome light function can be deacti- vated. For details, consult a Mitsubishi Motors dealer.
Coming home light
NOTE
BK0230300US.book
131 ページ ２０１５年７月３０日　木曜日　午後８時３８分

Interior lights 5-168 Features and controls
5
N00553800067
Regardless of the dome
light switch position,
when you press the lens, the light on the sidethat is pressed illuminates; when you press the lens again, the light goes off.
N00525401485
The dome light can be turned on by sliding the dome light switch.
 The driver’s door is closed after all the other doors are closed while the lockknob of the driver’s door is in the lock position.  The door is closed and the power door lock switch is used
to lock the doors.
 In vehicles equipped with the keyless entry system, the keyless entry systemremote control transmitter is used to lock the doors.  In vehicles equipped with the F.A.S.T.-key, the doors are lockedusing the F.A.S.T.-key.NOTE
 When the engine is started using the key while the doors are closed, if you remove the key, the dome light will illuminate for about 30 seconds before going off.  When the engine is started using the F.A.S.T.-key while the doors are closed, ifthe ignition switch is moved to the “LOCK” position, the dome light will illuminate for about 30 seconds before going off.  The time until the light goes off can be adjusted. See your au
thorized Mitsubishi
Motors dealer for details.2- (OFF) The dome light goes off.
Reading lights

Dome light (Rear)
(if so equipped)
1- (ON) The dome light comes on. 2- (
)
The dome light comes on when any dooris opened. When all the doors are closed, the dome light illuminates for about 30 seconds then goes off. However, the lightgoes off immediately if: The door is closed while the ignition switch is in the “ON” position.  The driver’s door is closed after all the other doors are closed while the lock knob of the driver’s door is in the lock position. The door is closed and the power door lock switch is used to lock the doors. In vehicles equipped with the keyless entry system, the keyless entry sys- tem remote control transmitter is usedto lock the doors.
BK0230300US.book
168 ページ ２０１５年７月３０日　木曜日　午後８時３８分