battery MITSUBISHI LANCER SPORTBACK 2010 8.G MMCS Manual

NOTE  For safety reasons, some functions are not possible
to operate while driving. If an abnormality (e.g., water or foreign matter
enters the MMCS or the MMCS emits smoke or
an abnormal smell) occurs, do not use the MMCS.
Have it inspected at an authorized Mitsubishi
dealer. Do not continue to use the MMCS or try to
repair it yourself.
 The following are characteristics of the LCD and
are not malfunctions:
- Small black spots or bright spots (red, blue, or
green) on the screen.
- When it is cold, the screen becomes darker or
reddish or operations become slower.
- Color and brightness vary according to the
viewing angle.
 Use a clean soft cloth to wipe off any dirt from the
screen. Do not use any cleaners (such as benzene,
thinners, antistatic agents or chemical cloths), as
they may damage the screen.
 Do not use the MMCS for an extended time while
the engine is off, as it will discharge the vehicle
battery.
Usage Precautions
WARNING
 Do not operate the Mitsubishi Multi Communication
System (MMCS) while driving. Always concentrate on your driving first. Keep
your eyes and mind on the road. If distracted while
driving, you could cause an accident.
 When operating the MMCS, do not park with the
engine running in a closed or poorly ventilated
area. Carbon monoxide gas, which is odorless
and extremely poisonous, can build up and cause
serious injury or death.
CAUTION
 Drive according to the actual traf c conditions. The
MMCS gives guidance to arrive at the destination,
but it cannot warn the driver of sudden dangers or
potential damage.
 The route guidance of the MMCS may sometimes
differ from the actual road conditions. Drive safely
in accordance with the new road conditions or
regulations.
 Do not look at the screen for a long time while
driving, as it can cause an accident.
 Do not disassemble or modify, as it could cause
malfunctions, smoke emissions or re.






 


Starting the MMCS 2-1
Basic Operation
Basic Operation
Starting the MMCS
WARNING
 Do not operate the Mitsubishi Multi Communication
System (MMCS) while driving. Always concentrate on your driving rst. Keep your

eyes and mind on the road. If distracted while
driving, you could cause an accident.
 When operating the MMCS, do not park with the
engine running in a closed or poorly ventilated
area. Carbon monoxide gas, which is odorless and
extremely poisonous, can build up and cause serious
injury or death.
1 Turn “ON” the ignition switch
eng_244

eng_a002
The opening screen is displayed.

If any function other than AUDIO was used last time,
go to Step 2.NOTE If special days and anniversaries
(page 9-1)
have
been set, when the date matches the settings, the
set icon is displayed on screen.
 If maintenance information
(page 9-9)
has been set,
when the maintenance distance has been exceeded
or the maintenance timing has been exceeded, a
telop will be displayed in the opening screen.
2 Touch the desired language
eng_a001-1
NOTE When the meter is set to Auto, the language of both
sides can be changed by performing operations on
either the MMCS side or the meter side.
 When the meter is set to Manual, the language
of the meter side and the MMCS side can be set
separately. 3 Touch [OK]
After a moment, the display is changed to the
navigation screen.NOTE If the battery voltage is low in cold regions, etc., the
navigation screen is displayed rather than the screen
last used.






 


AUX / Video Entertainment System 8-11
Visual
AUX / Video Entertainment System
AUX
By connecting your own video equipment,
etc. to Auxiliary Video connecter (RCA), you
can show the playback on the MMCS.NOTE Images will not be shown while the car is moving.Connecting to Auxiliary Video connecter (RCA)Using a video cable sold on the market, connect the
video equipment, etc. to Auxiliary Video connecter
(RCA).
YELLOW
3&% 8)*5&
Type 1Type 2
YELLOW
3&%
8)*5&
YELLOW: Video
WHITE: Audio (Left)
RED: Audio (Right)
Switching to Auxiliary Video connecter (RCA)Switching to Auxiliary Video connecter (RCA) will show
the video from the connected equipment. 1 Press the [MODE] key
2 Touch [AUX]
eng_a310
The video from the equipment connected to Auxiliary
Video connecter (RCA) will be shown.NOTE When Auxiliary Video connecter (RCA) is connected
on the maker's option Video Entertainment System
and the Video Entertainment System is switched on,
[Rear-Display] will be shown.
 The connected video equipment cannot be operated
with the MMCS.
 Depending on the connected video equipment, it
may produce noise from the speakers.
 Use the connected video equipment
’s own power source,
such as its battery. Noise may be produced from the
speakers if the connected video equipment is used while
charging it using the 12 V power outlets of the vehicle.
 Do not activate [AUX] when no video equipment is
connected. Otherwise, noise may be produced from
the speakers.
 Connect video equipment when [AUX] is deactivated or
lower the vehicle’s speaker volume before connecting
it. Noise may be produced from the speakers if video
equipment is connected after [AUX] is activated. For information on how to connect and operate the
video equipment, refer to the owner’s manual for the
equipment.
Video Entertainment System
If upgraded to the manufacturer’s optional
Video Entertainment System, media
being played in the Video Entertainment
System can be played, or video device,
etc. connected to the Video Entertainment
System can be displayed.
NOTE While driving, DVD and other visual images cannot
be played using the front seat monitor.
 This operation is not possible if no Video
Entertainment System has been connected.
 This device can display in the Video Entertainment
System the audio screen being played, and be
operated using a special remote control.
 For details, refer to the user manual for the Video
Entertainment System.