speed MITSUBISHI LANCER SPORTBACK 2010 8.G MMCS Manual

Outline of the System 1-5
Introduction
Outline of the System
System Male or female voice guidance is available in 3
languages.
(English, French, Spanish)
 Trip information such as average speed, average fuel
economy, and instant fuel economy can be viewed. (page 9-5) Detailed settings can be made for vehicle equipment. (page 10-7) The vehicle maintenance timing can be managed
with the maintenance function.
(page 9-9)
 Environmental information such as the outside
air temperature, altitude, and air pressure can be
viewed.
(page 9-8)
 A special day or anniversary can be managed with
the calendar function.
(page 9-1)
 DVDs can be played.
(page 8-1)
 Music CDs can be recorded and played using the
Music Server.
(page 7-1)
Easy Operation Setting The touch panel enables easy operation.Destination Setting Addresses and nearby POIs can be easily searched
for and set as the destination.
(page 3-2)
 A route can be set for returning home.
(page 3-7)
 A new destination can be set from the 20
destinations that have been previously set. (page 3-7)
Display Guidance POI icons can be displayed on the map. There are
43 POI icon types.
(page 10-10)
 The menu and map colors can be changed. (page 10-6),(page 10-11) Markings can be displayed on the road on which the
vehicle is being driven.
(page 10-11)
Routing Detour routes can be set with speci ed distances or
streets to avoid.
(page 4-3)
 A route can be selected from 3 routes that have
different calculation conditions.
(page 4-4)
 Areas to avoid can be set.
(page 10-16)
Voice Guidance Guidance is given for the required information at the
optimum time.
(page 2-12)
 A male or female voice can be selected.
(page 10-5)
Vehicle information display (page 9-5) You can check or set driving information.
 You can check distance to empty, distance driven
after refueling, and driving time.






 


Error in the Current Location 1-9
Introduction
Error in the Current LocationIn situations such as the following, the current
location may not be correctly displayed. Vehicle was moved without it being driven
(E.g., when transported on a ferry or trailer) Vehicle direction was changed without turning on the
engine
(E.g., on a turntable in a parking area) After replacing the tires or chains
 When driving on roads with elevation differences,
such as mountain roads with steep inclines When driving on roads that continue for a long time
in a straight line or gentle curve
(E.g., freeways) When driving around tight hairpin corners
 When meandering on wide roads When driving on Y-shaped roads When starting and stopping frequently at low speed,
such as in a traf c jam






 


Recording to the Music Server 6-22Recording to the Music ServerTracks on music CDs can be recorded to the
HDD built into this device at approximately x4
speed.
NOTE The use of recorded tracks for purposes other than
personal enjoyment is prohibited by copyright law.
 Recorded sounds may suffer from noise occurring
or the sound quality may be different from original
sound.
 Tracks that have been recorded to the music server
cannot be reproduced in another medium (CD-R/
RW, HDD, etc.)
 Previously recorded tracks cannot be recorded again
from the same CD.
 Turning OFF the engine or removing the music CD
during recording will result in defective recording.
 During recording, the navigation system may be slow
to operate.
 Recording may be slower than the x4 speed due to
the processing load on the device or the status of
the music CD.
 If sound skipping or other errors occur, return to the
start of that track and restart the recording.
 Even if there are no blanks between tracks on the
CD, a brief silence is stored in the HDD between
tracks.
Displaying during Recording
eng_a320
1) REC symbol
During recording, this symbol is displayed in red,
and when all recordings have nished, the display is
turned OFF. The numbers describe the percentage
of the number of tracks that have finished being
recorded out of the total number of CD tracks, so if
recording a single track, “00%” is displayed.
2) Recording Status Symbol
Tracks being recorded are displayed in red, and
those that are not being recorded are displayed in
blue. No symbol is displayed for tracks that have
nished being recorded.
Recording
With auto recording, all tracks are
recorded automatically when a music CD
is inserted, and with manual recording only
the selected tracks can be recorded.
NOTE If the available HDD space is insuf cient, recording is
not possible.Recording SettingsSet the music CD recording method. 1 During music CD playback
(page
6-19)
, touch [
]
eng_a314
2 Touch [REC. setting]
eng_a316
1)2)






 


Watching DVDs 8-2
Basic Operations
1 Insert a DVD into the device
>>> “Inserting and Removing Disks” (page 6-4)
>>> “Switching to Audio Screen” (page 6-3)
eng_a406
The display is switched to DVD images automatically. 2 Touch the screen while the DVD
is displayed

eng_a407
The operations menu screen is displayed.
Playback
1 Touch [Play]
This resumes playback from paused or slow motion
playback.Pausing
1 Touch [Pause]
The DVD playback is paused.
The image is stopped and frozen.Stopping
1 Touch [Stop]
The DVD playback is stopped. The image disappears,
and the blue back screen is displayed.
eng_a408
NOTE Touch [Play] here to resume playback.
(Resume Playback)
 Touch [Stop] again and touch [Play] to play the DVD
from the beginning.
Fast-Forwarding and Rewinding
1 Touch and hold [
Chapter] or
[Chapter
] during playback
When the button is released, the playback screen is
displayed.Selecting Chapters
1 Touch [
Chapter] or [Chapter
] during playback
NOTE
 When the chapter has played for one second or
more, touch [
Chapter] to play from the start of
the current chapter.
Selecting Titles
1 Touch [
Title] or [Title ] during
playback
Slow Motion Playback

1 Touch [Slow]
NOTE
 Each time [Slow] is touched, the playback
speed is changed in the following order:
1/2>>>1/8>>>1/32>>>1/2.
 Touch [Play] to cancel slow motion playback.






 


Trip 9-5
Information
Trip
Trip information can be viewed and set.
1 Press the [INFO] key, and touch
[Trip]
eng_a140

eng_a208
The trip screen is displayed.
The average speed, Average Fuel Economy, and
Instant Fuel Economy information can be viewed.NOTE Touch [Graph] to view
the average speed and
average fuel economy
as a graph, measured
in 5-minute units.
eng_a211
 Touch [Manual] to change the reset mode to “Manual
Reset Mode”.
>>> “Reset Mode” (page 9-5)
2 Touch [
]

eng_a209
The 2/3 trip screen is displayed.
The distance to empty, distance driven after refueling
and driving time can be viewed. 3 Touch [
]

eng_a210
The 3/3 trip screen is displayed.
The lap time can be measured. >>> “Lap Time” (page 9-6)
Reset Mode
Two reset modes are available:
- Auto Reset Mode automatically resets
the average speed and average fuel
economy, four hours after the ignition
switch is turned OFF.
- In Manual Reset Mode, you can reset
the items when desired.
Changing the Reset Mode
1 Display the 1/3 Trip screen
2 Touch [Manual]
eng_a208

eng_a212
“Auto Reset Mode” is changed to “Manual Reset
Mode”.










Trip 9-6NOTE Touch [Auto] to return to “Auto Reset Mode”.
 In “Manual Reset Mode” or “Auto Reset Mode”,
touch [Reset] to reset the average speed and
average fuel economy.
Driving Distance and Time
The distance to empty, distance driven
after refueling and driving time can be
viewed on the 2/3 Trip screen.
Distance to EmptyThe displayed distance to empty is calculated from
the current remaining fuel and the recent average fuel
economy.Distance Driven After RefuelingDisplays automatically the distance driven after
refueling.
It is reset when the vehicle is refueled.NOTE If the amount of fuel added is less than approximately
2.6 gallons (10 litres), automatic reset will not be
performed. Press [Refuel] to reset.Driving TimeMeasures the time from when the ignition switch is
turned “ON” to when it is turned “OFF”.
It is reset when the ignition switch is turned from “OFF”
to “ON”.
Lap Time
Time, distance, speed and mileage can be
measured.
1 Display the 3/3 Trip screen
2 Touch [Start]
eng_a210

Total Line
eng_a213
The measurement starts. At this time, the speed and
mileage are being measured, so they are not displayed. 3 Touch [Lap]

eng_a214
The current measurement results are displayed in “A”.
NOTE Touch [Lap] again
and the measurement
results displayed in
“A” are moved to
“B”, and the current
measurement results
are displayed in “A”.
eng_a215
4 Touch [Stop]

eng_a216
The measurements stop and the measurement results
are displayed in the total line.NOTE Touch [Start] to restart the measurements from
where they stopped.
 The measurements stop if the ignition switch is
turned “OFF” during measurement. If this happens,
the measurements restart when the ignition switch is
turned “ON”. 5 Touch [Reset]






 


Air Conditioner 9-11
Information
Air Conditioner
The air conditioner status can be viewed.
1 Press the [INFO] key, and touch
[Air Conditioner]
eng_a140

eng_a203
1) Blower speed indicator
Displayed in 9 levels.
2) Air direction/Outside air intake indicator
3) Auto mode indicator
Displayed when the AUTO mode is operating.
4) Rear window defogger indicatior
Displayed when the rear window defogger is
operating.
5) Air conditioner indicator
Displayed when the air conditioner is operating.
6) Front defroster indicator
Displayed when the windshield defogger is
operating.NOTE When air conditioning operations are performed in the navigation screen display, the display shown below
will appear.
eng_a204
 A short time after air conditioner operations have
been completed, the screen will return to the
navigation display.
1)
2)3) 4) 5) 6)






 


Sound Control 10-2
Sound Control
Adjusts the sound.If Premium Sound System is not connected 1 Press the [SET] key, and touch
[Sound Control]
eng_a018-2
2
Touch each item to adjust the sound
eng_a164
NOTE Touch [Speed Compensated Volume &EQ off] to turn
ON sound quality and volume adjustments according
to vehicle speed. 3 Touch [Back]
The sound adjustment is completed.
If Premium Sound System is connected 1 Press the [SET] key, and touch
[Sound Control]
eng_a018-2

eng_a233
The sound control menu screen is displayed.
Audio Control
1 Touch [Audio Control] in the
Sound Control menu screen
2 Touch each item to adjust the
sound
eng_a234
NOTE PUNCH LEVEL represents subwoofer gain.
 Touch [Speed Compensated Volume & EQ off] to
turn ON sound quality and volume adjustments
according to vehicle speed. 3 Touch [Back]
The sound adjustment is completed.






 



System Settings 10-5
Settings
Unit
Changing the units of the distance display.
NOTE When the meter is set to Auto, the units of both
sides can be changed by performing operations on
either the MMCS side or the meter side.
 When the meter is set to Manual, the units of
the meter side and the MMCS side can be set
separately. 1 Touch [Unit]
2 Touch one of the units
eng_a167
3 Touch [Back]
Other Settings
Settings related to the guidance.
1 Touch [Navi Voice / Others]
2 Touch each item to change the
setting
[page 1/3]
eng_a168-1
[page 2/3]
eng_a243-1
[page 3/3]
eng_a500-1
3 Touch [Back]
The setting change is completed.
Guidance Voice VolumeThe guidance volume can be changed using eight
discrete levels.[ ] The volume is decreased.
[ + ] The volume is increased.Speed Compensated VolumeGuidance voice volume is increased linked to speed.
[ON] Linked to speed
[OFF] Not linked to speed (Volume is constant.)Guidance VoiceChanging the settings for the guidance voice.
[Female] Guidance in a female voice.
[Male] Guidance in a male voice.Beep Sound VolumeThe operations volume can be set at four discrete
levels. [0] is mute.






 


System Settings 10-6 Keyboard LayoutChanging the layout of the keyboard.
[Alphabet]
eng_a169
[PC]
eng_a170
Color SchemeSet the color scheme for the menu screen, etc.
[Red] The menu is displayed using a red color
scheme.
[Blue]The menu is displayed using a blue
color scheme.A/V Icons on MapIt is possible to set whether or not to display on screen
icons displaying the audio status.
[On] Display.
[Off] Do not display.
Sensor CalibrationThe level of the vehicle speed sensor and gyro sensor
can be checked and the learning levels can be reset.
eng_a206
NOTE When tires are replaced, etc., delete the data by
touching [Clear].
The learning levels can be reset.A/C Cut inSetting whether or not to use an interrupt display
during air conditioning operations.
[On] Interrupt is displayed.
[Off] Interrupt is not displayed.