door lock MITSUBISHI MONTERO 1989 1.G Workshop Manual

6 INTRODUCTION AND MASTER TROUBLESHOOTING - Vehicle Identification
~3.0 L Engine>
CHASSIS NUMBER
STAMPING LOCATION
NOOCE-
The chassis number is stamped on the side of the frame near ._
the right rear wheel.
CHASSIS NUMBER CODE CHART
L141 v KJOOOOOI
I I I I
VEHICLE SAFETY CERTIFICATION LABEL NWCF
The vehicle safety certification label is attached to face of left
door pillar.
This label indicates the month and year of manufacture, Gross
Vehicle Weight Rating (G.V.W.R.), front and rear Gross Axle
Weight Rating (G.A.W.R.), and Vehicle Identification Number
(V.I.N.).
ENGINE MODEL STAMPING
Nwce-
The engine model is stamped on the right front side on the
top edge of the cylinder block (for M-liter engines). For 3.0-
liter engines, it is stamped at the right rear of the top of the
cylinder block.
These engine model numbers are as shown in the following.
Engine model
Engine displacement 1
G54B 2.555 liters (155.9 cu.iiTI
6G72 2.972 liters (181.4 cu.in.)
The engine serial number is stamped near the engine model
number, and the serial number cycles, as shown below.
_ ~-
Engine serial number Number cycling
AA0201 to YY9999 AA0201 ----3 A.49989
/ Lo ABOOOl ---+ AY9999
I
1 LmBAOOOl ---+ YY9999
__.
-..:-:-- I 1-