oil filter MITSUBISHI MONTERO 1991 User Guide
[x] Cancel search | Manufacturer: MITSUBISHI, Model Year: 1991, Model line: MONTERO, Model: MITSUBISHI MONTERO 1991Pages: 1333, PDF Size: 24.61 MB
Page 514 of 1333
(1) - Determine cause and correct prior to repair or
replacement of part.
( 2) - Determine source of contamination, such as engine
coolant, fuel, metal particles, or water. Require
repair or replacement.
( 3) - Inoperative includes intermittent operation or out of
OEM specification. Some components may be serviceable;
check for accepted cleaning procedure.
\
\
\
\
\
\
\
ENGINE COOLING SYSTEMS
NOTE: Overheating, poor engine performance, and insufficient
cabin heat can be affected by, but are not limited to,
all of the components in the engine cooling system.
ENGINE COVERS (OIL PAN, VALVE COVER, TIMING COVER)
ENGINE COVER (OIL PAN, VALVE COVER, TIMING COVER) INSPECTION \
\
\
\
\
\
\
Condition Code Procedure
Attaching hardware
incorrect .............. B ............ Require replacement.
Attaching hardware
loose .................. A .. Require repair or replacement.
Attaching hardware
missing ................ C ............ Require replacement.
Baffle loose ............ 2 .. Suggest repair or replacement.
Baffle missing .......... C ............ Require replacement.
Bent, affecting
performance ............ A .. Require repair or replacement.
Bent, not affecting
performance ............ .. ....... No service suggested or
required.
Cracked (not leaking) ... 2 .. Suggest repair or replacement.
Leaking externally ...... A .. Require repair or replacement.
Leaking internally,
causing fluid
contamination .......... A .. Require repair or replacement.
Missing ................. C ............ Require replacement.
Restricted passage ...... A .. Require repair or replacement.
Threads damaged ......... A .. Require repair or replacement.
\
\
\
\
\
\
\
ENGINE OIL
ENGINE OIL INSPECTION \
\
\
\
\
\
\
Condition Code Procedure
Contaminated ............ A .. ( 1) Require replacement of oil
and filter.
Level high .............. B ... Determine source of incorrect
level and require repair.
Level low ............... B ... Determine source of incorrect
level and require repair.
Maintenance intervals ... 3 ... Suggest replacement to comply
with vehicle's OEM recommended
service intervals.
( 1) - Determine source of contamination, such as engine coolant,
fuel, metal particles, or water when changing oil. Require
Page 515 of 1333
![MITSUBISHI MONTERO 1991 User Guide repair or replacement. \
\
\
\
\
\
\
ENGINE OIL CANISTER](/img/19/57332/w960_57332-514.png "MITSUBISHI MONTERO 1991 User Guide repair or replacement. \
\
\
\
\
\
\
ENGINE OIL CANISTER")
repair or replacement. \
\
\
\
\
\
\
ENGINE OIL CANISTERS
See ENGINE OIL FILTERS AND CANISTERS .
ENGINE OIL COOLERS (EXTERNAL)
ENGINE OIL COOLER (EXTERNAL) INSPECTION \
\
\
\
\
\
\
Condition Code Procedure
Air flow restriction .... A .. Require repair or replacement.
Attaching hardware
broken ................. A ... Require repair or replacement
of hardware.
Attaching hardware
missing ................ C .......... Require replacement of
hardware.
Attaching hardware not
functioning ............ A ... Require repair or replacement
of hardware.
Bypassed ................ A .. Require repair or replacement.
Connection leaking ...... A .. Require repair or replacement.
Corroded ................ 1 .. Suggest repair or replacement.
Fins damaged, affecting
performance ............ A .. Require repair or replacement.
Fins damaged, not
affecting performance .. 2 .. Suggest repair or replacement.
Fluid flow restrictions . A .. Require repair or replacement.
Internal restrictions,
affecting performance .. A .. Require repair or replacement.
Leaking ................. A .. Require repair or replacement.
Missing ................. A ............ Require replacement.
Threads damaged ......... A .. Require repair or replacement.
Threads stripped (threads
missing) ............... A ............ Require replacement.
\
\
\
\
\
\
\
ENGINE OIL DRAIN PLUGS AND GASKETS
ENGINE OIL DRAIN PLUG AND GASKET INSPECTION \
\
\
\
\
\
\
Condition Code Procedure
Leaking ................. A .. Require repair or replacement.
Missing ................. C ............ Require replacement.
Threads damaged ......... A ........... ( 1) Require repair or
replacement.
( 1) - Some OEMs require replacement of drain plug gasket when
removing drain plug. Inspect threads in oil pan for damage.
\
\
\
\
\
\
\
ENGINE OIL FILTERS AND CANISTERS
ENGINE OIL FILTER AND CANISTER INSPECTION \
\
\
\
\
\
\
Condition Code Procedure
Bulged .................. A ........ ( 1) Require replacement.
Page 516 of 1333
Further inspection required.
Canister attaching
hardware broken ........ A ... Require repair or replacement
of hardware.
Canister attaching
hardware loose ......... A ................. Require repair.
Canister attaching
hardware missing ....... C ............ Require replacement.
Canister attaching
hardware not
functioning ............ A ... Require repair or replacement
of hardware.
Center tube collapsed ... A ........ (2) Require replacement.
Further inspection required.
Contaminated ............ A ...... ( 3) Require replacement of
oil and filter.
Dented .................. 2 ........ ( 4) Suggest replacement.
Further inspection required.
Leaking ................. A .. Require repair or replacement.
Maintenance intervals ... 3 ... Suggest replacement to comply
with vehicle's OEM recommended
service intervals.
( 1) - Inspect pressure relief valve.
( 2) - Inspect bypass.
( 3) - Determine cause of contamination, such as engine coolant,
fuel, metal particles, or water when changing oil. Require
repair or replacement.
( 4) - Determine cause, such as broken motor mount.
\
\
\
\
\
\
\
ENGINE OIL GASKETS
See ENGINE OIL DRAIN PLUGS AND GASKETS .
ENGINE OIL PRESSURE GAUGES (MECHANICAL)
ENGINE OIL PRESSURE GAUGE (MECHANICAL) INSPECTION \
\
\
\
\
\
\
Condition Code Procedure
Indicates out of range .. B .......... ( 1) Further inspection
required.
Inoperative ............. A .......... ( 2) Further inspection
required.
Leaking ................. A .. Require repair or replacement.
Reads inaccurately ...... 2 .. Suggest repair or replacement.
( 1) - Gauge may indicate problem with contaminated oil, level,
pressure, or temperature, or problem with gauge.
( 2) - Gauge may indicate problem with contaminated oil, level,
pressure, or temperature, or problem with gauge.
Inoperative includes intermittent operation, out of OEM
specification, or out of range. Further inspection
required to determine cause.
\
\
\
\
\
\
\
EVAPORATIVE EMISSION (EVAP) CANISTER FILTERS
EVAPORATIVE EMISSION (EVAP) CANISTER FILTER INSPECTION \
\
\
\
\
\
\
Condition Code Procedure
Page 656 of 1333
LO CKIN G H UBS
1991 M it s u bis h i M onte ro
1991 DRIVE AXLES
Locking Hubs
Mitsubishi: Montero, Pickup
DESCRIPTION
Automatic hubs are engaged by rotational force of axle shaft
when 4WD is selected at transfer case. Automatic hubs disengage when
2WD is selected or vehicle is driven in Reverse. Cams, brakes and
springs are used to lock or unlock automatic hubs.
Engagement is accomplished through gears and spring actions
within hub. When hub is locked, hub brake engages inner hub, which is
connected to axle shaft by inner splines of hub. Hub brake is
connected to hub body by outer splines.
REMOVAL
1) Hub must be unlocked. To unlock hub, place transfer case
lever in 2H position and move vehicle in Reverse approximately 4-6
feet.
2) Remove cover from locking hub. If hub cover cannot be
loosened by hand, wrap shop towel around cover and use an oil filter
wrench to loosen cover.
3) Raise and support vehicle. Remove wheel assembly. Using
snap ring pliers, remove snap ring and shim from end of axle. Remove
locking hub retaining bolts. Remove locking hub.
INSTALLATION
1) To install, reverse removal procedure. Apply sealant to
contact areas between locking hub assembly and hub/rotor assembly.
Ensure sealant is NOT applied on outer areas of hub/rotor assembly
toward brake contact areas.
2) Align locking hub assembly key area with steering knuckle
key way area. Loosely install locking hub assembly on hub/rotor
assembly. Ensure locking hub assembly fully contacts hub/rotor
assembly.
3) Install locking hub retaining bolts. Tighten bolts to 36-
43 ft. lbs. (49-58 N.m). Using spring scale attached to wheel stud,
measure turning resistance required to rotate hub/rotor assembly.
4) Turning resistance should NOT exceed 3.1 lbs. (1.4 kg). I\
f
turning resistance exceeds specification, check for incorrect
installation of locking hub assembly or components.
5) Install shim and snap ring on drive axle. Rotate drive
axle until maximum end play is obtained. Using a dial indicator, check
drive axle end play.
6) Drive axle end play should be .008-.020" (.20-.51 mm). If\
axle end play is NOT within specification, adjust end play by changing
axle shaft shim. Install hub cover. Tighten hub cover 13-25 ft. lbs.
(18-34 N.m).
OVERHAUL
DISASSEMBLY
Page 702 of 1333
![MITSUBISHI MONTERO 1991 User Guide \
\
\b\
\b\
\b\
\
\
Short Trips In Replace Engine Oil](/img/19/57332/w960_57332-701.png "MITSUBISHI MONTERO 1991 User Guide \
\
\b\
\b\
\b\
\
\
Short Trips In Replace Engine Oil")
\
\
\b\
\b\
\b\
\
\
Short Trips In Replace Engine Oil 3,000 Miles or 3 Months
Freezing
\
\b\
\b\
\
\
Temperatures Inspect Cooling 6,000 Miles or 6 Months
System
\
\b\
\b\
\
\
Replace Engine Oil 6,000 Miles or 6 Months
Filter
\
\b\
\b\
\
\
Inspect Throttle ONLY ONCE AT FIRST:
Position 15,000 Miles
\
\b\
\b\
\
\
Inspect Drive Belt START AT: 15,000 Miles;
Tension REPEAT EVERY SUBSEQUENT:
30,000 Miles
\
\b\
\b\
\
\
Replace A/T Fluid 30,000 Miles
\
\b\
\b\
\
\
Replace M/T Fluid 30,000 Miles
\
\b\
\b\
\
\
Replace Transfer 30,000 Miles
Case Fluid
\
\
\b\
\b\
\b\
\
\
Towing Or Replace Engine Oil 3,000 Miles or 3 Months
Commercial Use
\
\b\
\b\
\
\
Inspect Cooling 6,000 Miles or 6 Months
System
\
\b\
\b\
\
\
Replace Engine Oil 6,000 Miles or 6 Months
Filter
\
\b\
\b\
\
\
Inspect Throttle ONLY ONCE AT FIRST:
Position 15,000 Miles
\
\b\
\b\
\
\
Inspect Drive Belt START AT: 15,000 Miles;
Tension REPEAT EVERY SUBSEQUENT:
30,000 Miles
\
\b\
\b\
\
\
Replace A/T Fluid 30,000 Miles
\
\b\
\b\
\
\
Replace M/T Fluid 30,000 Miles
\
\b\
\b\
\
\
Replace Transfer 30,000 Miles
Case Fluid
\
\
\b\
\b\
\b\
\
\
Driving Off-Road Replace Engine Oil 3,000 Miles or 3 Months
Or In Salty Or
\
\b\
\b\
\
\
Sandy Areas Inspect Cooling 6,000 Miles or 6 Months
System
\
\b\
\b\
\
\
Replace Engine Oil 6,000 Miles or 6 Months
Filter
\
\b\
\b\
\
\
Inspect Throttle ONLY ONCE AT FIRST:
Position 15,000 Miles
\
\b\
\b\
\
\
Inspect Drive Belt START AT: 15,000 Miles;
Tension REPEAT EVERY SUBSEQUENT:
30,000 Miles
\
\b\
\b\
\
\
Replace A/T Fluid 30,000 Miles
\
\b\
\b\
\
\
Replace M/T Fluid 30,000 Miles
Page 703 of 1333
![MITSUBISHI MONTERO 1991 User Guide \
\b\
\b\
\
\
Replace Transfer 30,000 Miles](/img/19/57332/w960_57332-702.png "MITSUBISHI MONTERO 1991 User Guide \
\b\
\b\
\
\
Replace Transfer 30,000 Miles")
\
\b\
\b\
\
\
Replace Transfer 30,000 Miles
Case Fluid
\
\
\b\
\b\
\b\
\
\
Severe Dust Replace Engine Oil 3,000 Miles or 3 Months
Conditions
\
\b\
\b\
\
\
Inspect Cooling 6,000 Miles or 6 Months
System
\
\b\
\b\
\
\
Replace Engine Oil 6,000 Miles or 6 Months
Filter
\
\b\
\b\
\
\
Inspect Throttle ONLY ONCE AT FIRST:
Position 15,000 Miles
\
\b\
\b\
\
\
Inspect Drive Belt START AT: 15,000 Miles;
Tension REPEAT EVERY SUBSEQUENT:
30,000 Miles
\
\b\
\b\
\
\
Replace A/T Fluid 30,000 Miles
\
\b\
\b\
\
\
Replace M/T Fluid 30,000 Miles
\
\b\
\b\
\
\
Replace Transfer 30,000 Miles
Case Fluid
\
\
\b\
\b\
\b\
\
\
Hot Weather, Replace Engine Oil 3,000 Miles or 3 Months
Stop-And-Go
\
\b\
\b\
\
\
Driving Inspect Cooling 6,000 Miles or 6 Months
System
\
\b\
\b\
\
\
Replace Engine Oil 6,000 Miles or 6 Months
Filter
\
\b\
\b\
\
\
Inspect Throttle ONLY ONCE AT FIRST:
Position 15,000 Miles
\
\b\
\b\
\
\
Inspect Drive Belt START AT: 15,000 Miles;
Tension REPEAT EVERY SUBSEQUENT:
30,000 Miles
\
\b\
\b\
\
\
Replace A/T Fluid 30,000 Miles
\
\b\
\b\
\
\
Replace M/T Fluid 30,000 Miles
\
\b\
\b\
\
\
Replace Transfer 30,000 Miles
Case Fluid
\
\
\b\
\b\
\b\
\
\
Extensive Idling Replace Engine Oil 3,000 Miles or 3 Months
\
\b\
\b\
\
\
Inspect Cooling 6,000 Miles or 6 Months
System
\
\b\
\b\
\
\
Replace Engine Oil 6,000 Miles or 6 Months
Filter
\
\b\
\b\
\
\
Inspect Throttle ONLY ONCE AT FIRST:
Position 15,000 Miles
\
\b\
\b\
\
\
Inspect Drive Belt START AT: 15,000 Miles;
Tension REPEAT EVERY SUBSEQUENT:
30,000 Miles
\
\b\
\b\
\
\
Page 705 of 1333
![MITSUBISHI MONTERO 1991 User Guide \b\
\
\
\
\
\
\
Fluid Levels](/img/19/57332/w960_57332-704.png "MITSUBISHI MONTERO 1991 User Guide \b\
\
\
\
\
\
\
Fluid Levels")
\b\
\
\
\
\
\
\
Fluid Levels
\b\
\
\
\
\
\
\
Braking System
\b\
\
\
\
\
\
\
Drive Shaft Boots
\
\
\
\
\
\
\
Replace
\
\
\
\
\
\
\
Engine Oil
\b\
\
\
\
\
\
\
Oil Filter
\
\
\
\
\
\
\
Lubrication Specifications
\
\
\
\
\
\
\
Application Specification
Brake & Clutch Fluid ............................ DOT 3 Or DOT 4
Engine Coolant .............. Ethylene-Glycol Antifreeze Coolant
Engine Oil (
1)
Minimum Temperature
Greater Than 32
F (0
C) ...... SAE 20W-40 Or 20W-50 API SG/CD
Greater Than -10
F (-23
C) ..... SAE 10W-30, 10W-40 API SG/CD
Maximum Temperature
Less Than 60
F (16
C) .......... SAE 5W-30 Or 5W-40 API SG/CD
Front Axle & Conventional Rear Axle
Minimum Temperature
Greater Than -10
F (-23
C) ........... SAE 90, 85W-90, 80W-90
API GL-5
Maximum Temperature
Less Than -30
F (-34
C) .................... SAE 75W API GL-5
Power Steering Fluid ............................. Dexron-II ATF
Rear Axle (With Limited
Slip Differential) ............ Hypoid Gear Oil (8149630EX) Or
Equivalent
Transmission
Automatic ...................................... Dexron-II ATF
Manual Transaxle &
Transfer Case (4WD) ................. SAE 75W-85W, 75W-90 API
GL-4 Or GL-5
(
1) - Since temperature ranges for different oil grades overlap,
brief fluctuations in outside temperatures are no cause for
concern.
\
\
\
\
\
\
\
Fluid Capacities
\
\
\
\
\
\
\
Application Quantity
Automatic Transmission
1987-93 ...................................... 7.6 Qts. (7.2L)
1994 (3.0L SOHC) ............................. 7.6 Qts. (7.2L) \
1994 (3.0L DOHC & 3.5L) ...................... 9.0 Qts. (8.5L) \
1995 ......................................... 7.9 Qts. (7.5L)
Cooling System
1987-88 ...................................... 8.5 Qts. (8.0L)
1989-95
2.6L ........................................ 9.7 Qts. (9.2L)
3.0L ....................................... 10.0 Qts. (9.5L)
1994-95
3.5L ....................................... 10.0 Qts. (9.5L)
Differential
1987-88 ...................................... 1.9 Qts. (1.8L)
Page 707 of 1333
![MITSUBISHI MONTERO 1991 User Guide Service Or Inspect
\
\
\
\
\
\](/img/19/57332/w960_57332-706.png "MITSUBISHI MONTERO 1991 User Guide Service Or Inspect
\
\
\
\
\
\")
Service Or Inspect
\
\
\
\
\
\
\
Verify Last Major Service Was Performed
\b\
\
\
\
\
\
\
Valve Clearance (Jet Valve Only)
\b\
\
\
\
\
\
\
Manual Transmission Oil & Transfer Case
\b\
\
\
\
\
\
\
Carburetor Choke Mechanism & Linkage (If Equipped)
\b\
\
\
\
\
\
\
Disc Brake Pads
\b\
\
\
\
\
\
\
Drum Brake Linings & Rear Wheel Cylinders
\b\
\
\
\
\
\
\
Brake Hoses
\b\
\
\
\
\
\
\
Fuel & Vapor Hoses
\b\
\
\
\
\
\
\
Steering Linkage Seals & Drive Shaft Boots
\b\
\
\
\
\
\
\
Lubricate Ball Joint
\b\
\
\
\
\
\
\
Power Steering Fluid (If Equipped)
\b\
\
\
\
\
\
\
Power Steering Hoses (If Equipped)
\b\
\
\
\
\
\
\
Lubricate Front Wheel Bearing
\b\
\
\
\
\
\
\
Drive Axle Fluid (Without Limited-Slip Differential)
\b\
\
\
\
\
\
\
Lubricate Drive Shaft Joints
\b\
\
\
\
\
\
\
Exhaust System
\b\
\
\
\
\
\
\
Lubricate Upper Control Arm Bushings
\b\
\
\
\
\
\
\
Drive Belt (Water Pump & Alternator)
\
\
\
\
\
\
\
Replace
\
\
\
\
\
\
\
Air Filter
\b\
\
\
\
\
\
\
Spark Plugs
\b\
\
\
\
\
\
\
Drive Axle Fluid (With Limited-Slip Differential)
\b\
\
\
\
\
\
\
Automatic Transmission & Transfer Case Fluids
\b\
\
\
\
\
\
\
Engine Oil & Filter
\b\
\
\
\
\
\
\
Engine Coolant
\
\
\
\
\
\
\
Lubrication Specifications
\
\
\
\
\
\
\
Application Specification
Brake & Clutch Fluid ............................ DOT 3 Or DOT 4
Engine Coolant .............. Ethylene-Glycol Antifreeze Coolant
Engine Oil (
1)
Minimum Temperature
Greater Than 32
F (0
C) ...... SAE 20W-40 Or 20W-50 API SG/CD
Greater Than -10
F (-23
C) ..... SAE 10W-30, 10W-40 API SG/CD
Maximum Temperature
Page 709 of 1333
![MITSUBISHI MONTERO 1991 User Guide 37,500 MILE (60,000 KM) SERVICE \
\
\
\
\
\
\
Service](/img/19/57332/w960_57332-708.png "MITSUBISHI MONTERO 1991 User Guide 37,500 MILE (60,000 KM) SERVICE \
\
\
\
\
\
\
Service")
37,500 MILE (60,000 KM) SERVICE \
\
\
\
\
\
\
Service Or Inspect
\
\
\
\
\
\
\
Verify Last Major Service Was Performed
\b\
\
\
\
\
\
\
Change Engine Oil
\
\
\
\
\
\
\
Lubrication Specifications
\
\
\
\
\
\
\
Application Specification
Engine Oil (
1)
Minimum Temperature
Greater Than 32
F (0
C) ...... SAE 20W-40 Or 20W-50 API SG/CD
Greater Than -10
F (-23
C) ..... SAE 10W-30, 10W-40 API SG/CD
Maximum Temperature
Less Than 60
F (16
C) .......... SAE 5W-30 Or 5W-40 API SG/CD
(
1) - Since temperature ranges for different oil grades overlap,
brief fluctuations in outside temperatures are no cause for
concern.
\
\
\
\
\
\
\
Fluid Capacities
\
\
\
\
\
\
\
Application Quantity
Engine Oil
1987 ......................................... 5.2 Qts. (5.0L)
1988 ......................................... 5.0 Qts. (4.8L)
1989-92 ...................................... 5.5 Qts. (5.3L)
1993-94 ...................................... 5.2 Qts. (4.9L)
\
\
\
\
\
\
\
\f
45,000 MILE (72,000 KM) SERVICE
45,000 MILE (72,000 KM) SERVICE \
\
\
\
\
\
\
Service Or Inspect
\
\
\
\
\
\
\
Verify Last Major Service Was Performed
\b\
\
\
\
\
\
\
Fluid Levels
\b\
\
\
\
\
\
\
Braking System
\b\
\
\
\
\
\
\
Drive Shaft Boots
\
\
\
\
\
\
\
Replace
\
\
\
\
\
\
\
Engine Oil
\b\
\
\
\
\
\
\
Oil Filter
\
\
\
\
\
\
\
Lubrication Specifications
\
\
\
\
\
\
\
Application Specification
Brake & Clutch Fluid ............................ DOT 3 Or DOT 4
Engine Coolant .............. Ethylene-Glycol Antifreeze Coolant
Engine Oil (
1)
Page 711 of 1333
![MITSUBISHI MONTERO 1991 User Guide \
\
\
\
\
\
\
\f
50,000 MILE (80,000 KM) SERVICE (198](/img/19/57332/w960_57332-710.png "MITSUBISHI MONTERO 1991 User Guide \
\
\
\
\
\
\
\f
50,000 MILE (80,000 KM) SERVICE (198")
\
\
\
\
\
\
\
\f
50,000 MILE (80,000 KM) SERVICE (1987-90)
50,000 MILE (80,000 KM) SERVICE (1987-90) \
\
\
\
\
\
\
Service Or Inspect
\
\
\
\
\
\
\
Verify Last Major Service Was Performed
\b\
\
\
\
\
\
\
Fuel System (Tank, Lines & Connections)
\b\
\
\
\
\
\
\
Carburetor Or Throttle Body Mounting
\
\
\
\
\
\
\
Replace
\
\
\
\
\
\
\
Fuel Filter
\b\
\
\
\
\
\
\
Fuel, Water & Vapor Hoses
\b\
\
\
\
\
\
\
EGR Valve
\b\
\
\
\
\
\
\
Oxygen Sensor
\
\
\
\
\
\
\
Service Labor Times
\
\
\
\
\
\
\
Application Hours
30,000 (60,000) 50,000
Application Mile Service Mile Service
2.6L 4-Cylinder
Automatic Transmission .... 7.9 (8.9) ................. 2.6
Manual Transmission ....... 6.9 (7.9) ................. 2.6
3.0L V6
Automatic Transmission .... 6.1 (10.6) ................ 2.6
Manual Transmission ....... 5.1 (9.6) ................. 2.6
\
\
\
\
\
\
\
\f
52,500 MILE (84,000 KM) SERVICE
52,500 MILE (84,000 KM) SERVICE \
\
\
\
\
\
\
Service Or Inspect
\
\
\
\
\
\
\
Verify Last Major Service Was Performed
\b\
\
\
\
\
\
\
Change Engine Oil
\
\
\
\
\
\
\
Lubrication Specifications
\
\
\
\
\
\
\
Application Specification
Engine Oil (
1)
Minimum Temperature
Greater Than 32
F (0
C) ...... SAE 20W-40 Or 20W-50 API SG/CD
Greater Than -10
F (-23
C) ..... SAE 10W-30, 10W-40 API SG/CD
Maximum Temperature
Less Than 60
F (16
C) .......... SAE 5W-30 Or 5W-40 API SG/CD
(
1) - Since temperature ranges for different oil grades overlap,
brief fluctuations in outside temperatures are no cause for