MITSUBISHI MONTERO 1991 Workshop Manual
MONTERO 1991
MITSUBISHI
MITSUBISHI
https://www.carmanualsonline.info/img/19/57332/w960_57332-0.png
MITSUBISHI MONTERO 1991 Workshop Manual
Page 613 of 1333
Fig. 9: Heater System Wiring Diagram (Montero)
Page 614 of 1333
Fig. 10: Heater System Wiring Diagram (1992 Montero)
Page 615 of 1333
Fig. 11: Heater System Wiring Diagram (Pickup & Ram-50)
Page 616 of 1333
Fig. 12: Heater System Wiring Diagram (1992 Pickup & Ram-50)
Page 632 of 1333
Fig. 10: Identifying Instrument Cluster Components (Montero)
Courtesy of Mitsubishi Motor Sales of America.
Removal & Installation (Pickup & Ram-50)
1) Disconnect negative battery cable. Remove heater fan
Page 633 of 1333
switch knob, heater control knobs and radio knobs. Remove instrument
cluster bezel. Remove mounting screws from 4 corners of cluster.
2) Disconnect speedometer cable and connectors from back of
cluster. Remove cluster assembly. See Fig. 11 or Fig. 12. To install,
reverse removal procedure.
Fig. 11: Instrument Cluster Component ID (Pickup & Ram-50 W/Tach)
Courtesy of Mitsubishi Motor Sales of America.
Fig. 12: Instrument Cluster Component ID (Pickup & Ram-50 W/O Tach)
Courtesy of Mitsubishi Motor Sales of America.
SPEEDOMETER CABLE
Page 674 of 1333
1 - 20 Amp (Yellow)
Hazard Light, Dome Light, Clock
2 - 10 Amp (Red)
Taillights
3 - 10 Amp (Red)
Turn Signal Lights
4 - 10 Amp (Red)
Back-Up Lights, Gauges
5 - 15 Amp (Light Blue)
Defogger
6 - 20 Amp (Yellow)
Heater
7 - 15 Amp (Light Blue)
Stoplights
8 - 15 Amp (Light Blue)
Horn, Wiper, Washer
9 - 10 Amp (Red)
Rear Wiper, Rear Washer
10 - 15 Amp (Light Blue)
Cigarette Lighter, Radio
FUSE PANEL IDENTIFICATION (1992-96)
Fig. 9: Fuse Panel Identification (1992-96)
Courtesy of Mitsubishi Motor Sales of America, Inc.
Fuse & Circuit Breaker Identification
Page 734 of 1333
\003
C - S PEC IF IC ATIO NS
1991 M it s u bis h i M onte ro
1991 ENGINE PERFORMANCE
Service & Adjustment Specifications
Chrysler Motors: Colt, Colt 200, Colt Vista,
Ram-50, Stealth, Summit
Mitsubishi: Eclipse, Galant, Mirage, Montero,
Pickup, 3000GT
INTRODUCTION
Use this article to quickly find specifications related to
servicing and on-vehicle adjustments. This is a quick reference
article for when you are familiar with an adjustment procedure and
only need a specification.
CAPACITIES
BATTERY SPECIFICATIONS \
\
\
\
Application Amp. Hr. Rating
Colt, Mirage & Summit
Type 1 ............................... 48
Type 2 ............................... 36
Colt Vista ............................. 36
Colt 200 ............................... 52
Eclipse ................................ 50
Galant ................................. 40
Montero ................................ 52
Pickup
2.4L ................................. 36
3.0L ................................. 52
Ram-50
2.4L ................................. 36
3.0L
Standard ........................... 52
Optional ........................... 55
Stealth & 3000GT ....................... 52
\
\
\
\
FLUID CAPACITIES \
\
\
\
\
\
\
Application Quantity
Automatic Transaxle (Dexron-II)
Colt, Colt 200, Colt Vista, Galant & Mirage ...... 6.4 Qts. (6.1L)\
Galant (AWD) ..................................... 6.8 Qts. (6.5L\
)
Eclipse
Except Turbo ................................... 6.4 Qts. (6.1L)\
Turbo .......................................... 7.4 Qts. (7.0L)\
Stealth & 3000GT ................................. 7.9 Qts. (7.5L)\
Summit ........................................... 6.1 Qts. (5.8L)\
Automatic Transmission (Dexron-II)
Montero .......................................... 7.6 Qts. (7.2L)\
Pickup & Ram-50 .................................. 7.4 Qts. (7.0L)\
Cooling System (Includes Heater & Reserve Tank)
Colt, Colt 200, Mirage & Summit .................. 5.3 Qts. (5.0L)\
Colt Vista ....................................... 7.4 Qts. (7.0L)\
Eclipse
Page 834 of 1333
Fig. 7: Brakes, Steering, & Suspension
Fig. 8: Air Conditioning, Heater & Ventilation
Page 845 of 1333
95C). Disconnect oxygen sensor connector. See Fig. 5. Connect
ohmmeter between heater terminals of oxygen sensor connector as
specified in OXYGEN SENSOR 4-WIRE CONNECTOR TERMINAL IDENTIFICATION
table. This test checks resistance of oxygen sensor heater element.
Fig. 5: O2 Sensor Connector Term. ID
Courtesy of Mitsubishi Motor Sales of America.
2) When oxygen sensor is at 68
F (20C), resistance should be
approximately 12 ohms (20 ohms on 3.0L models). If resistance is not
within specification, replace oxygen sensor.
CAUTION: DO NOT apply battery voltage to oxygen sensor output
terminals. Damage to oxygen sensor could result.
3) Apply battery voltage to oxygen sensor heater terminals as
specified in OXYGEN SENSOR 4-WIRE CONNECTOR TERMINAL IDENTIFICATION
table. This heats oxygen sensor heater element.
4) Connect digital voltmeter between output terminals
specified in OXYGEN SENSOR 4-WIRE CONNECTOR TERMINAL IDENTIFICATION
table. Repeatedly race engine and observe oxygen sensor output
voltage. If oxygen sensor output voltage is not within 0.6-1.0 volt,
replace oxygen sensor.
OXYGEN SENSOR 4-WIRE CONNECTOR TERMINAL ID TABLE
\
\
\
\
\
\
\
Heater Output
