warning light MITSUBISHI MONTERO 1998 User Guide

MITSUBISHI MONTERO 1998 User Guide MONTERO 1998 MITSUBISHI MITSUBISHI https://www.carmanualsonline.info/img/19/57333/w960_57333-0.png MITSUBISHI MONTERO 1998 User Guide

Page 121 of 1501

MITSUBISHI MONTERO 1998 User Guide          cause accidental air bag deployment and personal injury.
NOTE:    Refer to WIRING DIAGRAMS for connector identification.
         1) Before proceeding, see  SERVICE PRECAUTIONS. Deactivate
SR

Page 122 of 1501

MITSUBISHI MONTERO 1998 User Guide volts or more, replace SRS-ECU. See SRS AIR BAG CONTROL UNIT (ECU)
under REMOVAL & INSTALLATION. If voltage is not as specified, check
connector C-93, C-101, and C-132, and repair if necessary. If
con

Page 123 of 1501

MITSUBISHI MONTERO 1998 User Guide meter.
         Light Does Not Turn Off
         1) Before proceeding, see  SERVICE PRECAUTIONS. Connect
negative battery cable and turn ignition switch to ON position. If SRS
warning light stays on w

Page 128 of 1501

MITSUBISHI MONTERO 1998 User Guide ANTI-LOCK BRAKE SYSTEM 
1998 Mitsubishi Montero
         1997-98 BRAKES
          Mitsubishi - Anti-Lock
          Montero
         DESCRIPTION
CAUTION:  See ANTI-LOCK BRAKE SAFETY PRECAUTIONS  articl

Page 129 of 1501

MITSUBISHI MONTERO 1998 User Guide          ADJUSTMENTS
          * PLEASE READ FIRST *
NOTE:    For adjustment information on brake pedal height, free play,
         parking brake and stoplight switch, see BRAKE SYSTEM article.

Page 130 of 1501

MITSUBISHI MONTERO 1998 User Guide for one second, and then go out. Turn ignition switch to START
position. Warning light should come on and stay on.
         2) When ignition switch is turned from START to ON position,
warning light s

Page 131 of 1501

MITSUBISHI MONTERO 1998 User Guide Fig. 2:  Identifying Instrument Cluster Connector Terminals
Courtesy of Mitsubishi Motor Sales of America.
         After Engine Starts, ANTI-LOCK Warning Light Remains On
         1) With ignition on

Page 132 of 1501

MITSUBISHI MONTERO 1998 User Guide          1) Inspect ABS relay box. See Fig. 3. Replace ABS relay box
if needed. If ABS relay box is okay, go to next step.
         2) Disconnect ECU 22-pin connector and ABS relay box 8-pin
connector

Page 133 of 1501

MITSUBISHI MONTERO 1998 User Guide Fig. 5:  Identifying ECU Harness Connector Terminals 22-Pin Connector
Courtesy of Mitsubishi Motor Sales of America.
Fig. 6:  Identifying ECU Harness Connector Terminals 26-Pin Connector
Courtesy of M

Page 134 of 1501

MITSUBISHI MONTERO 1998 User Guide Fig. 7:  Connecting Scan Tool
Courtesy of Mitsubishi Motor Sales of America.
         Using ANTI-LOCK Warning Light
         1) To retrieve stored DTCs, locate Data Link Connector (DLC)\
under left s
Page:   < prev 1-10 11-20 21-30 31-40 41-50 50 next >