lock MITSUBISHI OUTLANDER 2010 2.G User Guide

Seat and restraint systems
2-7
2
To adjust the seat forward or backward
N00401900228
Manual seat adjustmentPull the seat adjusting lever up and slide the seat forward or
backward to the desired position. Release the adjusting lever to
lock the seat in place.
Power seat adjustmentOperate the switch forward or backward to move the seat to the
desired position. Release the switch to lock the seat in place.NOTE

To prevent the battery from going dead, operate the power
seat with the engine running.
WA R N I N G
!

To make sure that the seat is securely locked, try to
move it forward or backward without using the
adjusting lever.
1- Forward (toward the front of the vehicle)
2- Backward (toward the rear of the vehicle)
BK0115300US.book 7 ページ ２００９年７月１６日　木曜日　午前９時１３分

2-8 Seat and restraint systems
2
To adjust the seatbacks
N00402000268
Manual seat adjustmentTo adjust the seatback, lean forward slightly, gently pull the
seatback lock lever up, then lean backward to a comfortable
position and release the lever. The seatback will lock in place.
Power seat adjustmentOperate the switch in the direction of the arrows to adjust the
seatback.NOTE

To prevent the battery from going dead, operate the power
seat with the engine running.
CAUTION
!

The reclining mechanism used in the seatback is
spring loaded, and will cause the seatback to return
quickly to the vertical position when the lock lever is
operated. When pulling the lever, sit close to the
seatback or hold the seatback with your hand to
control its return motion.
1- Move forward
2- Move backward
BK0115300US.book 8 ページ ２００９年７月１６日　木曜日　午前９時１３分

Seat and restraint systems
2-13
2 Second row seats (60/40 split fold/tumble
seats)
N00402500188
When sitting in the second row seat, adjust the head restraints
to heights at which they lock in position. Refer to “Head
restraints” on page 2-25. To adjust the seat forward or backward (vehicles
with second row seat slide function)Pull the seat adjusting lever and gently rock the seat forward or
backward to the desired position. Release the adjusting lever to
lock the seat in place.NOTE

You can adjust the seat forward or backward on either side
separately.
WA R N I N G
!

To make sure that the seat is securely locked, try to
move it forward or backward without using the
adjusting lever.CAUTION
!

When sliding (vehicles with second row seat slide
function) or reclining the seat rearward, pay careful
attention to the third row seat passengers.
BK0115300US.book 13 ページ ２００９年７月１６日　木曜日　午前９時１３分

2-14 Seat and restraint systems
2
To adjust the seatbacksTo adjust the seatback, lean forward slightly, gently pull the
seatback lock lever, then lean backward to a comfortable posi-
tion and release the lever. The seatback will lock in place.NOTE

You can adjust the seatback forward or backward on either
side separately.
WA R N I N G
!

To reduce the risk of serious injury or death in the
event of an accident or sudden stop, all seatbacks
should be kept in the upright position while the vehi-
cle is in motion.


Seat belt performance during an accident can be
adversely affected if the seatbacks are reclined. The
more a seatback is reclined, the more likely seat belt
performance will be adversely affected. If the seat
belt is not properly positioned against the body dur-
ing an accident, there is increased risk you will slide
under the belt and receive serious injury or death.


When a person is sitting in the middle seating posi-
tion of the second row seats, the two sides of the sec-
ond seats must have the same forward/backward
position (vehicles with second row seat slide func-
tion) and the same seatback angle. Otherwise, the
seat belt for the middle seating position may not be
adequately effective in the event of hard braking or
a collision.CAUTION
!

The reclining mechanism used in the seatback is
spring loaded, and will cause the seatback to return
quickly to the vertical position when the lock lever is
operated. When pulling the lever, sit close to the
seatback or hold the seatback with your hand to
control its return motion.WA R N I N G
!
BK0115300US.book 14 ページ ２００９年７月１６日　木曜日　午前９時１３分

2-18 Seat and restraint systems
2
4. Pull the strap (C-black) to release the lock. 5. Tilt the third row seat assembly backward.
NOTE

If the third row seat is locked to the floor after tilting the
third row seat assembly backward, pull the strap (C-black)
again to release the lock.
BK0115300US.book 18 ページ ２００９年７月１６日　木曜日　午前９時１３分

2-20 Seat and restraint systems
2
NOTE

Push up and forward so that the third row seat is firmly
secured.7. Raise up the head restraints. Make sure that they lock in
position.
8. Set the cover back in place. Gently shake the seat and
seatback to make sure they are firmly secured.
BK0115300US.book 20 ページ ２００９年７月１６日　木曜日　午前９時１３分

Seat and restraint systems
2-23
2
NOTE

Push down so that the backside of the third row seat is
firmly secured to the floor.


If it is difficult to lock the seat in place, return the third
row seat to its original position, and then lock it in place
by pushing down while pulling with more force on the
strap, so that the back end of the third row seat touches the
floor.5. Tilt the seat assembly forward.
BK0115300US.book 23 ページ ２００９年７月１６日　木曜日　午前９時１３分

2-26 Seat and restraint systems
2
Adjustment of the head restraint height (The
front and second row seats)To reduce the risk of injury in an accident, adjust the head
restraint height so that the center of the restraint is at your eye
level when seated. Any person too tall for the restraint to reach
their eye level when seated should raise the restraint to the
highest locked position.

To raise the restraint, pull it straight up.


To lower the restraint, push down on it while pressing the
lock knob (A) in the direction shown by the arrow.


After adjusting the height, push down on the restraint to
make sure it is locked in position.
To remove (The front and second row seats)Press the lock knob (A) in the direction shown by the arrows.
Then pull the head restraint up and out of the seatback.To install (The front and second row seats)First check that the head restraint is facing in the right direction
as shown in the previous illustration, and then insert it into the
seatback. Push the head restraint down while pressing the lock
knob (A) until the restraint locks into place.
WA R N I N G
!

To help minimize the risk of neck injury in the event
of an accident, the head restraints must be properly
installed and positioned to proper height before
vehicle operation.
BK0115300US.book 26 ページ ２００９年７月１６日　木曜日　午前９時１３分

Seat and restraint systems
2-27
2
CAUTION
!

Check that the lock knob (A) is extended out as
shown in the illustration. Then pull the head
restraint up to make sure that it is locked in place
and will not come out of the seatback.
CAUTION
!

The shape and size of the head restraint differs
according to the seat. Always use the correct head
restaint provided for the seat and do not install the
head restraint in the wrong direction.
BK0115300US.book 27 ページ ２００９年７月１６日　木曜日　午前９時１３分

Seat and restraint systems
2-29
2
Folding the second row seats
N00405700107
The second row seat can be folded to create an additional cargo
area or to permit access to the third row seat on vehicles with a
third row seat.NOTE

You can separately fold the right and left side of the sec-
ond row seat.


When folding down the seatback, the seat belt buckles can
be stowed in the slits on the seat to avoid leaving marks on
the seat.
“Storing the second row and third row seat belts” on page
2-44.
To fold up the seat1. Lower the head restraints to the lowest position.
Refer to “Head restraints” on page 2-25.2. Operate the lever (A) or lock release strap (B) on the sec-
ond row seats to fold down the seatbacks.
Operating the leverOperating the lock release strap
BK0115300US.book 29 ページ ２００９年７月１６日　木曜日　午前９時１３分