display MITSUBISHI OUTLANDER 2011 2.G Rear Entertainment

Supported disc types
16
Supported disc types
settings. In such cases, add either “.mp3” or “.wma”
extensions and then write to disc.
● Unsupported MP3 and WMA les may not playback
properly, and le and folder names may not be
displayed properly.Music CD
CDs with the mark (logo) below can be played.
·
CDDA (8 cm, 12 cm music disc)

·
CD-R/CD-RW


·
CD-TEXT(8 cm, 12 cm)

Video CD
Disc recorded in NTSC/PAL format.



MP3/WMA
CD-ROM and CD-R/RW discs with MP3/
WMA format les written on a computer
can be played on the system.
There are restrictions on the type of les
and media that can be used, so read
the following information carefully before
writing MP3/WMA les to discs. Also be
sure to carefully read the user manual for
your CD-R/RW drive or recording soft-
ware and use your equipment accordingly.
NOTE
● Never give copies of music CDs or les to others or
upload them to an Internet server, as such behaviour
is illegal, whether for pro t or not.
● Do not change the le extension of any le that is not
MP3 to “.mp3” or any le that is not WMA to “.wma”.
Playing discs with such les can cause system
recognition errors that result in loud noise that could
damage your speakers.
● Proper playback may be impossible, depending on
the recorder and recording software used to write to
the disc. In such cases, refer to the user manual for
the device or software that was used.
● Extensions are sometimes not added, depending on
the computer operating system, version, software, or


   


Supported disc types
18
Supported disc types
Supported MP3 le speci cations are listed below.
Item Contents
StandardMPEG1 AUDIO LAYER3 MPEG2.5 AUDIO
LAYER3
MPEG2 AUDIO LAYER3
Sampling
frequency [Hz]MPEG1 32k/44.1k/48k
MPEG2 16k/22.05k/24k
Bit rate [kbps]MPEG132/40/48/56/64/80/96/112/128/160/192/2
24/256/320
MPEG2, 2.58/16/24/32/40/48/56/64/80/96/112/128/14
4/160
Variable bit rate (VBR) Supported
Channel mode
Stereo/joint stereo/dual channel/monaural
ID3-TagVer. 1.0, Ver 1.1, title, artist name, album
name
Maximum number of
displayed characters in
folder name, le name,
album name, title name,
artist nameFull size: 17 characters
Half size: 34 characters
Compatible CD-R/RW formats are listed below.
Name Standard Description
CD-R/RW
format
speci cationsISO9660 Level 1
Has le names with a maximum of
8 characters and extensions with 3
characters.
(Capital roman characters and the
underscore “_” can be used.)
ISO 9660
expansionJolietA maximum of 64 characters
can be used as le names.
Multisession Supported
Maximum
number of trees8 trees (including roots)
Maximum
number of
folders255 folders
Maximum
number of les400 les (Total number on the disc, not including les
other than MP3 and WMA)
Supported MP3/WMA standards


  


Supported disc types
19
Supported disc types
Supported WMA le speci cations are listed below.
Item Contents
Standard Windows Media Audio Version7.0
Sampling frequency [Hz] 22.05k/32k/44.1k/48k
Bit rate [kbps]Sampling
frequency
[Hz]22.05k ................ 32 32k ............... 48, 64
44.1k ..
48, 64, 80, 96, 128, 160, 192,
256, 32048k ............................64, 96, 128, 160, 192
VBR (Variable bit rate) Supported
Channel mode Stereo/monaural
WMA-Tag Title, artist name, album name
Maximum number of
displayed characters in
folder name, le name,
album name, title name,
artist nameFull size: 17 characters
Half size: 34 characters
Supported MP3/WMA standards


  


Supported disc types
20
Supported disc types
Folder arrangement
In the following arrangement, tracks (song les) are numbered as:
(1), (2), (3)... and folders are numbered as 1, 2, 3....

MP3/WMA fi les
· In MP3 and WMA les, data such as song names, artist names,
album names, and genre names are recorded as an “ID3-Tag” or
a “WMA-Tag”, and this information can be indicated on screens
such as the system display.
· Any player that supports MP3/WMA will recognize folder trees in
the same way that a computer does: [genre]
→ [artist]
→ [album]
→ [song (MP3/WMA le)], and songs are searchable in this way.


  


23 Basic operations
Basic operations
Turning the power ON and OFF
Press the POWER button
The power comes ON.
· The POWER indicator illuminates.
Press the POWER
button again
The power goes OFF.
NOTE
● If the display screen is left open when the ACC is turned OFF, the next time the
ACC is turned ON, the system power automatically comes on and the last source
displayed on the system is displayed again.
● If the display screen is closed when the ACC is turned OFF, the next time the ACC
is turned ON, the system power does not automatically come on.
Open the display screen to turn on the system power.
● To turn the power ON with the display screen closed, press the POWER
button.
Basic system operations


  


24Basic operations
Basic operations
To insert/eject the disc
To insert a disc
mb079
Insert the disc into the disc loading slot with the
playing side facing down.
When the disc is inserted, it is loaded and the DISC
indicator illuminates.
To eject the disc
Push the EJECT button to eject the disc.
mb079a
NOTE
● If a disc is inserted when the system power is OFF,
the power will automatically come ON.
● When a disc is ejected and left in the disc loading
slot for 10 seconds, the disc will automatically be
reloaded into the system.
● Discs can be ejected even when the ACC is turned
OFF.
Sample image for vehicles equipped with the MMCS

To select a system source
Press the SOURCE button
Each time the
SOURCE button is pressed, the
system source changes as shown in the gure
below.
DISC
The video screen from the disc (such
as DVD video, DVD audio) in the
system is displayed.

VIDEO
Images from video devices (such as
video cameras, games) connected to
the video input terminals are displayed.

FRONT
If the vehicle is equipped with the
Mitsubishi Multi Communication
System(MMCS),the audio or video
being played on the MMCS is
displayed on the video entertainmant
system display screen.
NOTE
● When the SOURCE
button is pressed, the currently
selected source is displayed in the upper left corner of
the screen.


  


25 Basic operations
Basic operations
Basic operations for playing a disc
Insert a disc
When a disc is inserted, the screen automatically changes to
DISC and the disc begins to play.
mngj027If a disc is already inserted, press the
SOURCE button, select DISC, and press
the PLAY
button.
NOTE
● When a DVD video and DVD audio is inserted, the main menu is sometimes
displayed.In this case, use the disc menu to operate the DVD.

To pause
Press the PAUSE button
Playback pauses. With a DVD video, DVD audio, or video CD, the paused image
will remain displayed.
Pressing the PAUSE button again while in pause mode resumes playback.

To stop the disc
Press the
STOP button
Playback stops.
To Play a disc


   


27 Basic operations
Basic operations
To adjust display attributes
Press the
DISP button
Display attribute adjustment items (BRIGHT, CONTRAST, COLOR, TINT) are
displayed on the screen.
Move the
JOYSTICK left and right to select the item to be
adjusted, then move the JOYSTICK up and down to make
the adjustment

BRIGHTMoving up increases brightness.
Moving down decreases brightness.

CONTRASTMoving up increases the contrast.Moving down decreases the contrast.


COLORMoving up increases the green hue.
Moving down increases the red hue.

TINTMoving up darkens the color.
Moving down lightens the color.
After making adjustments, wait a while and the display adjustment items will
disappear.
NOTE
● Brightness can be adjusted for daytime (LIGHT OFF) and nighttime (LIGHT ON)
respectively
To adjust display attributes and screen size
mb101h


  


28Basic operations
Basic operations
Move the
JOYSTICK left and right
to select the desired screen size
Screen sizes

WIDE
Displays a screen enlarged horizontally to t the display.


NORMAL
Displays the screen at a ratio of 3:4 (height to width).


CINEMA
Displays the screen at a ratio of 9:16 (height to width).
After making adjustments, wait a while and the
display adjustment items will disappear.
To adjust screen size
Press the DISP button
When display attribute adjustment items
are displayed, press the
DISP button
again
Screen size adjustment items (WIDE, NORMAL,
CINEMA) are displayed.


  


29 Basic operations
Basic operations
To view video on the system
Video devices can be used by connecting
them to the Auxiliary Video connector
(RCA).
Press the
SOURCE button and
change the system mode to VIDEO
NOTE
● If there are no video devices connected when
VIDEO mode is selected, no video will be
displayed
● Video devices can only be operated from the
device(not by the video entertainment system
controls).
● Refer to the user manual that came with the
video device for connecting or operating
instructions.
To view video from the MMCS on the system
*Vehicles equipped with the MMCS
From the video displayed on the MMCS,
the DVD video to be played on the MMCS
can be displayed.
Set the MMCS to DVD video .
Press the SOURCE
button and
change the system mode toFRONT
The MMCS video can be viewed on the system.

image002
NOTE
●When the system SOURCE is changed to FRONT,
the audio cannot be played through the wireless
headphones.The audio is played over the vehicle
speakers.
→“Combination of the system and the MMCS/
the front audio”(P30)
● In the MMCS, only the audio of a DVD video etc.
while driving, and the video is not displayed.
However, in this system the video is displayed
on the video entertainment display screen even
while driving.
● The MMCS screens for the radio, CD (MP3),
music server and navigation cannot be displayed.
● The MMCS can be operated from the system
when the system is selected with the MMCS.
→ “Using the system to operate the MMCS and
audio”
(P59)To view video from the system on the
To view video from the system on the MMCS
*Vehicles equipped with the MMCSVideo from the system can be displayed on
the MMCS.
Set the MMCS to rear seat display
Press the SOURCE
button and
change the system mode to DISC (or
VIDEO) to play a DVD video
Audio or video from the system can be played on the
MMCS.
image006
NOTE
● For safety's sake, video from the system cannot
be displayed on the MMCS while driving.
Only the audio is played.
● Video from video devices can be displayed on
the MMCS even when the power is OFF.
●The system can be operated from the MMCS.
Refer to the MMCS user manual for details.