change time MITSUBISHI OUTLANDER 2011 2.G Rear Entertainment

9 Names and functions of parts
Names and functions of parts
PREW button · To return to the start of the currently playing
chapter or track or to the start of the previous
chapter or track.
→ P26
NEXT button
· To move to the start of a subsequent chapter
or track (song)
→ P26
PAUSE button
· To execute the pause function → P25
SLOW button
· To execute the slow playback function → P26
REW button
· To execute the fast reverse function → P26
STOP button
· To execute the stop function → P25
PLAY button
· To execute the play function → P25
FWD button
· To execute the fast forward function → P26
mb078na
Remote control
Name and function of Remote control POWER
button
· To turn the system power ON/OFF → P23
JOYSTICK / ENT (enter)
· To select from the menu and enter the selection
·
Using the system to operate the MMCS and the

yfront audio
MENU
button · To call up the menu for discs such as DVD
video
→ P36, 49
RTN
button
· To return to the previous screen
SOURCE
· To select the system source → P24
CURSOR
button
· To call up the CURSOR menu → P31
DISP
button
· To call up the display attributes menu → P27
SET UP
button
· To set up the DVD video settings → P41
SPEAKER button
· Each time the SPEAKER button is pressed,
yythe speaker output changes between
yy
yythe system and the MMCS or the front audio.
NOTE
● The CURSOR menu can also be used to change
the setting of the speaker audio.
ANGLE button
· To change the angle → P37
AUDIO button
· To change the audio language → P37

SUB TITLE button
· To cha
nge the subtitle language → P37
Remote control
(Stored in the passenger side seatback
pocket.)


   


Supported disc types
16
Supported disc types
settings. In such cases, add either “.mp3” or “.wma”
extensions and then write to disc.
● Unsupported MP3 and WMA les may not playback
properly, and le and folder names may not be
displayed properly.Music CD
CDs with the mark (logo) below can be played.
·
CDDA (8 cm, 12 cm music disc)

·
CD-R/CD-RW


·
CD-TEXT(8 cm, 12 cm)

Video CD
Disc recorded in NTSC/PAL format.



MP3/WMA
CD-ROM and CD-R/RW discs with MP3/
WMA format les written on a computer
can be played on the system.
There are restrictions on the type of les
and media that can be used, so read
the following information carefully before
writing MP3/WMA les to discs. Also be
sure to carefully read the user manual for
your CD-R/RW drive or recording soft-
ware and use your equipment accordingly.
NOTE
● Never give copies of music CDs or les to others or
upload them to an Internet server, as such behaviour
is illegal, whether for pro t or not.
● Do not change the le extension of any le that is not
MP3 to “.mp3” or any le that is not WMA to “.wma”.
Playing discs with such les can cause system
recognition errors that result in loud noise that could
damage your speakers.
● Proper playback may be impossible, depending on
the recorder and recording software used to write to
the disc. In such cases, refer to the user manual for
the device or software that was used.
● Extensions are sometimes not added, depending on
the computer operating system, version, software, or


   


24Basic operations
Basic operations
To insert/eject the disc
To insert a disc
mb079
Insert the disc into the disc loading slot with the
playing side facing down.
When the disc is inserted, it is loaded and the DISC
indicator illuminates.
To eject the disc
Push the EJECT button to eject the disc.
mb079a
NOTE
● If a disc is inserted when the system power is OFF,
the power will automatically come ON.
● When a disc is ejected and left in the disc loading
slot for 10 seconds, the disc will automatically be
reloaded into the system.
● Discs can be ejected even when the ACC is turned
OFF.
Sample image for vehicles equipped with the MMCS

To select a system source
Press the SOURCE button
Each time the
SOURCE button is pressed, the
system source changes as shown in the gure
below.
DISC
The video screen from the disc (such
as DVD video, DVD audio) in the
system is displayed.

VIDEO
Images from video devices (such as
video cameras, games) connected to
the video input terminals are displayed.

FRONT
If the vehicle is equipped with the
Mitsubishi Multi Communication
System(MMCS),the audio or video
being played on the MMCS is
displayed on the video entertainmant
system display screen.
NOTE
● When the SOURCE
button is pressed, the currently
selected source is displayed in the upper left corner of
the screen.


  


25 Basic operations
Basic operations
Basic operations for playing a disc
Insert a disc
When a disc is inserted, the screen automatically changes to
DISC and the disc begins to play.
mngj027If a disc is already inserted, press the
SOURCE button, select DISC, and press
the PLAY
button.
NOTE
● When a DVD video and DVD audio is inserted, the main menu is sometimes
displayed.In this case, use the disc menu to operate the DVD.

To pause
Press the PAUSE button
Playback pauses. With a DVD video, DVD audio, or video CD, the paused image
will remain displayed.
Pressing the PAUSE button again while in pause mode resumes playback.

To stop the disc
Press the
STOP button
Playback stops.
To Play a disc


   


31 CURSOR menu
CURSOR menu
What is the CURSOR menu
It is the menu that is displayed when a disc is played and a VIDEO
or FRONT source is selected.
It shows the track number and playback time, and it can be used
to change the language and angle.
In addition, the MMCS or the front audio operation menu is
displayed when a FRONT source is selected.
NOTE
●The CURSOR menu displays different content depending on the type of disc or
source that is played.
CURSOR menu display
CURSOR menu (1)
When the CURSOR
button is pressed while a disc is played
or a VIDEO, FRONT source is selected, CURSOR menu (1) is
displayed.
When DISC is selected
mb152a
Sample image of CURSOR menu (1) (DVD video)
To display from the CURSOR menu


   


32CURSOR menu
CURSOR menu
Changing

the speaker
output
Each time the ENTbutton is pressed,the
speaker output
changes between the
video entertainment
system and the
MMCS or the front
audio system.
Adjusting
the volume

Raises the volume
Lowers the volume
When FRONT is selected
When the CURSOR
button is pressed
CURSOR menu (1) is displayed
NOTE
● Refer to “Using the system to operate the MMCS
and the front audio”(P59) for details on CURSOR menu
(1) operations.
● CURSOR menu (1) is displayed
throughout playback of CD/MP3/WMA
discs.
MMMMM
M
Sample image of CURSOR menu (1) (MP3)
NOTE
● The CURSOR menu is displayed when the
CURSOR button is pressed and also when buttons
relating to CURSOR menu operations are pressed.
● If no functions are operated within about 7 seconds
(or 3 seconds) of the CURSOR menu being
displayed, the menu will disappear.
●
Refer to the operation instructions of the source for
details on the CURSOR menu.
When VIDEO is selected
When the CURSOR
button is pressed
CURSOR menu (1) is displayed.


   


33 CURSOR menu
CURSOR menu

CURSOR menu (3)
When the CURSOR button is pressed
again while CURSOR menu (2) is
displayed,CURSOR menu (3) is displayed
When DISC is selected

Changing

the speaker
output
Each time the ENTbutton is pressed,the
speaker output
changes between the
video entertainment
system and the
MMCS or the front
audio system.
Adjusting
the volumeRaises the volumeLowers the volume
NOTE
● Depending on the DISC, CURSOR menus (4) and
(5) can be selected by continuing to press the
CURSOR
button.
NOTE
● The operating status symbols for possible playback
operations are displayed in CURSOR menu (2).
●
When the
CURSOR button is pressed while
CD/MP3/WMA is playing, CURSOR menu (2) is
displayed.
When FRONT is selected
Changing

the speaker
output
Each time the ENTbutton is pressed,the
speaker output
changes between the
video entertainment
system and the
MMCS or the front
audio system.
Adjusting
the volumeRaises the volumeLowers the volume




CURSOR menu (2)
When theCURSOR button is pressed
again while CURSOR menu (1) is displayed,
CURSOR menu (2) is displayed.
When DISC is selected
mb155nad Operating status symbols


   


35 CURSOR menu
CURSOR menu
CURSOR menu display information
SOURCE CURSOR menu (1) CURSOR menu (2)CURSOR
menu (3)CURSOR
menu (4)CURSOR
menu (5)
DISCDVD Video(
→P36) Title number
Chapter number
Playback time
Operating status display symbol
Angle number, subtitle language, etc.
DISC operating status symbol


Title—DVD audio(
→P49) Group number
Track number
Playback time
Repeat/random
Operating status display symbol
Angle number, subtitle language, etc.

DLIST
Music CD(
→P52) Track number
Playback time
Audio output mode
Repeat/random
Operating status display symbol
Changing the speaker output Adjusting the volume
MP3/WMA(
→P52) Folder number or play list number
Track number
Playback time
Repeat/random
Display mode
Operating status display symbol
Video CD(
→P56) No PBC Track number
Playback time
Audio output mode
Repeat/random
Operating status display symbol
With PBC PBCdisplay
Audio output mode
Operating status display symbol
VIDEO(
→P32) Changing the speaker output Adjusting the volume——
FRONT(
→P59) MMCS or audio operation menu Changing the speaker output Adjusting the volume—
●The bold type indicates the items whose settings can be changed


   


DVD video
36
DVD videoDVD video
When the disc is stopped, press the

MENU
button
MB226
The title menu is displayed.
NOTE● The menu may not be displayed, depending on the
DVD video disc.
DVD video operations
mb101i
DVD video operations
Insert a disc
When a disc is inserted in the system, the
screen automatically changes to the DVD
video image and the disc begins to play.
image06If a disc is already inserted, press the
SOURCE button, select DISC, and press
the
PLAY button.
NOTE
● When a DVD video is inserted, the menu is sometimes
displayed.In this case, use the disc menu to operate
the DVD.
To display the title menu
During playback, press the STOP
button to stop the video.


   


DVD video
37
DVD video
To change the subtitle language
Each time the

SUB TITLE button is
pressed, the next available subtitle
language can be displayed in turn.
NOTE
● The CURSOR menu can also be used to change the
screen angle, audio language, or subtitle language.
→ “To change the angle, audio language, or subtitle
language” (P39)
To display the main menu
During video playback, press the
MENU
button
MB227
NOTE
● The menu may not be displayed, depending on the
DVD video disc.
● When the menu is displayed, use the disc menu
to operate the DVD. Refer to the DVD video user
manual for DVD operation instructions.
● Depending on the DVD, the same menu is sometimes
displayed as both the title menu and the main menu.
To change the screen angle, audio
language, or subtitle language
Refer to the DVD video user manual
for information about angles, audio
languages, and subtitle languages.
NOTE
● Angles may be selected when there are two or more
angles recorded on the DVD.
In some cases, the angle may not be changed for
certain scenes.
● Only the audio and subtitle languages recorded on
the DVD video are available.
In some cases, depending on the DVD video
speci cations, changes may not be made during
playback.
● Refer to the DVD video package for information
about available angles, audio languages, and subtitle
languages.
To change the angle
Each time the
ANGLE button is pressed,
the next available camera angle can be
displayed in turn.
NOTE
● For scenes that have different angles available,
the
mark is displayed on screen. → “To set
indications” (P45)
To change the audio language
Each time the
AUDIO button is pressed,
the next available audio language can be
displayed in turn.