OBD port MITSUBISHI OUTLANDER 2020 Owner's Manual (in English)
[x] Cancel search | Manufacturer: MITSUBISHI, Model Year: 2020, Model line: OUTLANDER, Model: MITSUBISHI OUTLANDER 2020Pages: 443, PDF Size: 60.03 MB
Page 26 of 443

Modifications to and racing of your vehicle 
General information 3-5
3
4. Fueling correctly depends mainly on cor- rect handling of the fuel filler nozzle. Donot tilt the nozzle. Insert the nozzle in the fuel tank filler port as far as it goes. 
5. When the nozzle stops automatically, do not add more fuel. 6. To re-install, turn the fuel tank filler pipe cap slowly clockwise until you hear click- ing sounds, then gently push the fuel tankfiller door closed.
N00301601205
This vehicle should not be modified withnon-Mitsubishi Motors  
genuine parts. Mit- 
subishi Motors desi 
gns and manufactures 
high quality vehicles  
with an emphasis on 
safety and durability.  
Modifications using 
non-Mitsubishi Motors genuine parts may affect the performance,  
safety and/or durabil- 
ity of your vehicle, a 
nd may violate applica- 
ble state and/or fe 
deral regulations. 
DAMAGE OR PERFORMANCE PROB- LEMS RESULTING FROM MODIFICA-TIONS TO OR RACING OF YOUR
NOTE
 While filling with fuel, hang the fuel cap on the hook (A) located on the inside surface ofthe fuel tank filler door.CAUTION Your vehicle can only be operated using unleaded gasoline. Seri 
ous engine and cata- 
lytic converter damage will result if leaded gasoline is filled into these vehicles, andconsequently, this must 
 never be attempted.
CAUTIONTo avoid fuel spillage and overfilling, do not “top-off” the fuel tank. 
 Spilled fuel could 
discolor, stain, or crack the vehicle’s paint-work. If fuel spills on the paintwork, wipe it off with a soft cloth.WA R N I N G Make sure the fuel tank filler cap is securely closed. If the fuel cap were loose, fuel could leak, re 
sulting in a fire.
CAUTIONIf you need to replace th
e fuel tank filler cap, 
use only the cap specified for your modelvehicle.
NOTE
 If the fuel tank filler 
cap is not tight while 
driving, the engine malfunction indicator(“SERVICE ENGINE SOON” or “Checkengine light”) may come on when the onboard diagnostic (OBD) system performs a self check.Always tighten the fuel 
 tank filler cap until 
you hear at least 3 clicks. The indicator will go of 
f after several driving 
cycles. If the indicato 
r does not go off, con- 
tact your authorized Mitsubishi Motors dealer or a repair fac 
ility of your choice as 
soon as possible.
Modifications to and racing  of your vehicle 
BK0278200US.book  5 ページ  2019年4月10日 水曜日 午前10時59分